2012 Dodge Ram 3500 Crew Cab Laramie 800 Ho 4x4 Lowest In Usa Call B4 You Buy on 2040-cars

Auto blog

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Dodge Challenger ADR prototypes spied with massive rubber

In an effort to give the Dodge Challenger one last hurrah before making the switch to the Giorgio platform in 2018, Automotive News reports that the automaker will come out with the Challenger ADR. The ADR, which stands for American Drag Racer, is expected to be a wide-body, Hellcat-powered variant that is closely based off of the current model. The report seems to have merit, as photographers have captured Challenger prototypes testing with massive tires. The prototypes look extremely similar to the current Challenger SRT Hellcat with the same hood scoop, front fascia design, rear spoiler construction, and rear end. The white and purple vehicles, though, are wearing extremely wide tires. The extra-wide rubber on the prototypes appear to have a similar tread design as the ones found on the Dodge Viper ACR, which features the grippy Kumho Ecsta V720. While the ACR wears 295 mm tires at the front, the car's rear tires are massive at 355 mm. The tires found on the prototype don't appear to be as large as the ones found on the ACR, but are expected to be larger than the current Challenger SRT Hellcat's, which are Pirelli P Zero Neros measuring 275 mm at all four corners. The Challenger ADR, with its wider, stickier tires is expected to cater to drivers that are looking to put all of the supercharged 6.2-liter V8's power to the ground. The rear-wheel-drive ADR is expected to come with a wide-body kit, which is missing from the prototypes. The Hellcat-powered, wide-body Challenger ADR is expected to make an appearance later in 2017, with an all-wheel-drive model (sans Hellcat engine) known as the GT AWD following closely thereafter. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery Dodge Challenger ADR Spy Shots View 16 Photos Spy Photos Dodge Coupe Performance prototype testing dodge challenger srt hellcat

Chrysler, Nissan minivans earn 'dire' crash test results, says IIHS [w/video]

First introduced in 2012, the Insurance Institute for Highway Safety's small-overlap frontal crash test has become the bane of many auto engineers' existence. It's a particularly steep design challenge because it forces just 25 percent of a vehicle's front end to take the brunt of a 40-mile-per-hour impact. The newly released results of four family-minded minivans underscore just how difficult the crash test is: only one scored an Acceptable rating, and the other three did very poorly. The 2008-2015 Chrysler Town & Country and Dodge Grand Caravan, plus the 2011-2015 Nissan Quest, all received Poor ratings in the test, the IIHS' lowest possible score. The three of them showed significant crash intrusion into the driver's area. The dummy in the Nissan actually had to be cut out of the vehicle, with an IIHS spokesperson remarking, "the structure collapsed like a house of cards." In the Fiat Chrysler Automobile vans, the steering wheels moved out of the way, making the airbag less effective and letting the driver's head hit the dashboard. While it was not actually crashed, the agency is also giving the 2009-12 Volkswagen Routan a Poor score because it shares a structure with the FCA models. The newly released results of four minivans underscore just how difficult the small-offset crash test is. The refreshed 2015 Toyota Sienna (shown), conversely, earned an Acceptable rating and is also a Top Safety Pick+ because of its optional forward collision warning and automatic braking system. While the crash test dummy moved around during the impact more than the agency would have liked, sensors showed a low risk of injuries. The IIHS tested the Honda Odyssey last year, and it earned a Good overall score, the agency's best ranking. It's also a Top Safety Pick+ vehicle. The only member of the minivan segment left to test is the latest Kia Sedona, and the Institute is reportedly waiting a little longer for Kia to make changes to improve the model's performance. When reached for comment, Nissan spokesperson Steve Yaeger provided Autoblog with the following statement: "Nissan is committed to vehicle safety and believes that consumers should have information about crash protection so they can make educated buying decisions. Nissan is proud of the 2014 Quest's "good" rating in the IIHS front moderate overlap and side impact tests as well as a "good" head restraint rating.