2007 Dodge Ram 3500 Slt Lifted 5.9l Diesel 61k Original Miles Amazing No Reserve on 2040-cars

Auto blog

Weekly Recap: FCA hit with record fine as NHTSA crackdown continues

The National Highway Traffic Safety Administration slapped Fiat Chrysler Automobiles with a record fine this week that could reach $105 million. The punishment comes after NHTSA found problems with the automaker's execution of 23 recalls that affect more than 11 million vehicles. The consent agreement, announced Sunday, calls for FCA to pay a $70-million cash fine and requires the company to spend at least $20 million over a three-year period on industry outreach programs and to beef up old recall campaigns. Failure to comply will result in another $15-million fine. FCA also agreed to federal oversight, which includes an independent monitor to oversee the company's recalls. The $70-million cash fine equals a penalty NHTSA levied on Honda in January. "Fiat Chrysler's pattern of poor performance put millions of its customers and the driving public at risk," NHTSA administrator Mark Rosekind said in a statement. "This action will provide relief to owners of defective vehicles, will help improve recall performance throughout the auto industry, and gives Fiat Chrysler the opportunity to embrace a proactive safety culture." FCA called the deal a "consensual resolution," but admitted that it "failed to timely provide an effective remedy" during certain recalls. "We are intent on rebuilding our relationship with NHTSA and we embrace the role of public safety advocate," the company said in a statement. The announcement kicked off a busy week for the automaker. NHTSA agreed FCA did not need to recall 4.7 million vehicles after an investigation failed to find defects with a power module used in some Jeep, Dodge, and Ram vehicles. A Georgia judge also reduced a civil verdict involving a death in a Jeep Grand Cherokee crash. Amid all of that, the company reported net profit of about 333 million euros, or $364 million in the second quarter on Thursday. OTHER NEWS & NOTES FCA ramps up Hellcat production Despite a decidedly legal and financial week for FCA, there was still time for the performance side of the business to briefly grab the spotlight. The automaker is more than doubling its production of the Dodge Challenger and Charger SRT Hellcats in response to strong demand. The order bank opens the second week of August and production begins in September. FCA will finish up its scheduled 2015 model-year Hellcat builds, and cancel any "unscheduled" versions, though customers will get discounted pricing for 2016.

Speedkore AWD twin-turbo Carbon Charger, best birthday gift ever

The backstory the Speedkore Performance AWD twin-turbo Carbon Charger teased a couple of weeks ago might be cooler than the car itself. Alan Palermo commissioned the carbon-fiber-bodied Dodge Demon Speedkore brought to SEMA last year, the one that supplanted the 6.2-liter Hellcat V8's supercharger with twin 6875 Precision Billet T4 turbos. That blasted the Demon's usual 840 horsepower up to 1,400 hp at the flywheel, 1,203 hp at the rear tires, good for an 8.77-second quarter-mile time at 162 miles per hour. Palermo's older brother remarked, "He liked the car but was more of a four-door guy," so Alan commissioned the AWD Carbon Charger as a 65th birthday gift for his sibling. Speedkore worked with Magnaflow on the sedan, starting with a 2019 Charger Pursuit as a base. The Wisconsin tuner secured a 2020 widebody Charger from Dodge, then 3D-scanned the bodywork to create the molds reproducing most of the sheetmetal in pre-preg carbon fiber. The hood, bumpers, fenders, rockers, rear spoiler, and rear diffuser are all fashioned from the lightweight stuff.  Beyond those Precision turbos laid in by Gearhead Fabrications, Speedkore installed a custom upper plenum, Boost Leash C02 progressive boost controller, custom Thitek heads, a Fore Innovations triple-pump fuel system feeding Injector Dynamics 1,700-cc injectors, and custom HP Tuners engine software calibration. Test results showed 1,525 hp at the crank when running 26 pounds of boost.  Hellraiser Performance engineered a new transmission working an FTI torque converter at one end and a carbon fiber driveshaft at the other. Instead of fortifying an off-the-shelf AWD system, Traction Products supplied a custom transfer case machined from billet shunting power to a set of Bogart Competition Series wheels wearing Mickey Thompson ET street rubber.  Speedkore fitted last year's Demon with a front-exit twin exhaust, with a single opening on each front fender, and left the rear bumper cutouts for the traditional exhaust empty. With the Carbon Charger sedan more of a family guy, Magnaflow sorted out a quad-pipe front-exit exhaust with two openings on each front fender, and ran a three-inch stainless steel Competition Series exhaust to the rear. The driver can switch between the two, the latter version providing a "moderate interior sound."  The folks at Speedkore say they'll keep tweaking the Carbon Charger after the show to get it right for the senior Palermo. We say, "Happy birthday, sir. Enjoy."

These are the cars being discontinued for 2024 and beyond

While we get new and updated car models every year, its inevitable that we'll need to say goodbye to some nameplates as well. This time around, it feels like we have confirmation or reports of an unusually large number of vehicles being discontinued in 2024 and the coming years.  We shouldn't be surprised. A large number of automakers are approaching their various target dates for electrification of their fleets. As such, some beloved internal combustion cars are going away, sometimes with appropriate fanfare like special editions. Others are slinking away quietly, killed by slowing sales and changing consumer trends. Of course, the end of production doesn't necessarily mean permanent death. Some of these models could be resurrected in later years ... and probably as an EV. With that in mind, here are the vehicles that are being discontinued in 2024 and beyond.   Alfa Romeo Giulia Quadrifoglio and Stelvio Quadrifoglio Alfa Romeo ended the production of its combustion-only Quadrifoglio models in April 2024 as the Italian automaker moves toward an electrified future. This isn't the end of the Quadrifoglio entirely, though, with Larry Dominique, Alfa Romeo senior vice president and head of North America, writing, "I look forward to presenting the next chapter in the four-leaf clover’s journey."   Chevrolet Camaro GM is ending production of the Chevy Camaro after 2024, but is sending it off in style with a CollectorÂ’s Edition. WouldnÂ’t it be cool, though, if Chevy brought it back as an EV?   Chevrolet Malibu Rumors of its demise have been around for a while, but now itÂ’s official. GM will end production of the Chevy Malibu in November of 2024. The assembly line in Kansas will be retooled to build the replacement for the Chevy Bolt.   Dodge Durango The three-row Durango is slated to be replaced by the Stealth nameplate after 2024. The Durango name could make a comeback later, according to rumors, on a body-on frame SUV based on the Jeep WagoneerÂ’s platform.   Ford Edge This is the last year for the Edge in the U.S., with the final unit rolling off the assembly line in April. On sale since 2007, the Edge topped 100,000 sales in all but three full years of production.   Ford Escape Newly refreshed for the 2023 model year, FordÂ’s popular Escape compact SUV is reportedly taking its leave in 2025 in order to usher in — you guessed it — an EV in its place.