2006 Dodge Ram 3500 Diesel Quad Cab Slt on 2040-cars

Auto blog

Driving the 2019 Dodge Durango Pursuit | Bells and whistles, lights and sirens

Recently, we went to the FCA proving grounds in Chelsea, Mich., to test out the company's 2019 model-year lineup. There are a lot of cars to choose from, and only a limited time to drive them, so since we couldn't drive the Dodge Challenger SRT Hellcat Redeye (that drive is coming soon, though) naturally we gravitated to the flashiest, noisiest one: the 2019 Dodge Durango Pursuit police vehicle. This is the first time the Durango is being offered as a cop car, and there are a number of features that make it fit for service. All Durango Pursuit models feature all-wheel drive, and it's available with two different engines. The standard motor is the 3.6-liter Pentastar V6, providing 293 horsepower and 260 pound-feet of torque. The tester we got to drive, though, was equipped with the 5.7-liter hemi V8, good for 360 horsepower and 390 pound-feet of torque. It also has a load-leveling performance suspension, which really helped out when we tossed it around the handling course. It has 8.1 inches of ground clearance, which means it can get to scenes off the beaten path. As much as we loved driving it, we had the most fun just playing with the lights and sirens of the Durango Pursuit. Standing outside the vehicle, the sirens and horn are incredibly loud, enough to make bystanders jump in fright. Dodge did a good job with the sound deadening, though, and the sustained wail wasn't bothersome when chasing imaginary suspects around the test track. One feature we didn't get to test out, but important to police duty, was the special Uconnect system in the Durango Pursuit. More than just an infotainment system, the seven-inch display is equipped to integrate various law enforcement systems. Another cool detail about the car, its tri-zone climate system is ideal for K9 units, with the ability to set separate HVAC settings for the dogs in the back of the car. Check out the video above, and stay tuned for more videos to come from our time spent at FCA's Chelsea proving grounds. Related Video: Dodge Crossover SUV Police/Emergency Special and Limited Editions Videos FCA

Dodge Challenger Shakedown: '71 body, new guts

While Jeep has created a number of vintage-bodied custom vehicles with modern components, this year's SEMA show plays host to Dodge's take on the idea. The Shakedown concept began life as a 1971 Challenger and ditched almost everything in it, including the engine and chassis. What's left is a modern car with a retro look. The chassis was a particularly complicated part of the job, since the Challenger was originally a unibody car. However, Dodge chose to separate the Challenger's iconic body from its structural parts, and moved it onto a custom, one-off chassis from which the body can be removed as needed. The chassis also carries lowered suspension, Challenger Hellcat brakes, and a 6.4-liter 392 Hemi V8 connected to a six-speed manual transmission from the Viper. Dodge also installed the engine using the new Hemi engine swap kit from Mopar. With the shaker cold-air intake and custom exhaust, the Shakedown's powerplant makes 485 horsepower. View 13 Photos The body itself received plenty of tweaking as well. Dodge shaved off the drip rails, door handles, and turn signals for a cleaner look, and also fitted the grille, headlights, and taillights from a 2017 Challenger. The whole thing is finished in matte black paint with a "vibrating" stripe offset on the left side. The Shakedown also gets 20-inch Slingshot rear wheels and a pair of custom 19-inch versions for the front. On each fender is a bright red "392" decal that uses the same font as the labels on classic Mopars 360 cubic-inch V8s. Inside, the Shakedown gets the same radical upgrade as the chassis. Two Viper seats accompany a Viper steering wheel, and the rear seats are gone altogether. The Viper gearbox is shifted with a Challenger Hellcat gear knob, and carbon-fiber accents and leather adorn the wheel, door panels, instrument panel and center console. Related Video: Image Credit: FCA, Joel Stocksdale SEMA Show Dodge Coupe Concept Cars Performance

Will the Chrysler 300 go front-wheel drive?

FCA chief executive Sergio Marchionne hinted last week that the strapping rear-wheel-drive Chrysler 300 sedan could go front-wheel drive for its next generation using the underpinnings from the Chrysler Pacifica minivan. Speaking at the Pacifica's production launch in Windsor, ON, Marchionne said, "this plant and this architecture is capable of making the 300 successor, the front-wheel, all-wheel-drive successor," Reuters reported. Perhaps realizing he appeared to be announcing a dramatic shift in product strategy, Marchionne backpedaled in response to a follow-up question, noting only that the Ontario factory is "capable" of making the sedan. "It's capable. It's not a commitment," he said, according to Reuters. The 300 is currently built in Brampton, ON, alongside the mechanically similar Dodge Charger and Challenger. The platform, known as LX in enthusiast circles, is an evolution of Mercedes-based chassis pieces that date to the DaimlerChrysler era. Marchionne's comments didn't cover the Dodges and left a lot open to interpretation. The 300 could switch to front- and all-wheel-drive and focus on a more civilized, elegant ride character, leaving the Charger and two-door Challenger as traditional rear-wheel-drive muscle cars. That strategy would further differentiate the Chrysler and Dodge car lines. Additionally, the Charger's RWD platform makes it a popular police vehicle, and both Dodges are offered in top trim as 707-horsepower Hellcats. Switching to front-wheel drive would seemingly complicate both of those endeavors. Rumors have also swirled that Alfa Romeo could contribute RWD underpinnings for Dodge. Related Video: Featured Gallery 2015 Chrysler 300 View 92 Photos Design/Style Chrysler Dodge Off-Road Vehicles Performance Sedan chrysler pacifica