2006 Dodge Ram 3500 4x4 5.9l Cummins Turbo Diesel Quad Cab Long Bed Many Extras on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Man crashes car through store window, says he needs a beer

Police body cameras captured a chaotic scene at a Cleveland-area convenience store after a man drove his car through the front of the store and barricaded himself in a walk-in cooler. According to WJW, the Convenience Mart in Rocky River, Ohio, had just closed in the early hours of May 7 when a black Dodge Challenger barreled through the security bollards at around 40 miles per hour and crashed through the front window. Police arrived to find the car parked in the store with its hazards on, the store clerk trapped beneath debris, and no driver. The clerk told officers the driver got out, told the clerk that he needed a beer, then wandered into the walk-in cooler. Officers found the driver barricaded inside the cooler. A tense standoff ensued with the agitated, confused man, who dared the cops to shoot him. Police learned he was suffering PTSD-related issues from his military service and job with the Federal Protective Service. "The conversation he was having with the police was deranged, consistent with somebody who was going through a mental crisis," RRPD Chief Kelly Stillman told WJW. Eventually, an officer was able to use a taser on the man, who put up a fight but was eventually subdued. He faces charges that include DUI and reckless driving. Thankfully, the store clerk escaped relatively unscathed. His life was saved by a deli case that absorbed the impact of the car and sheltered him from falling debris. "Had the car been over a couple more feet, he was hurt, it could have been serious bodily injury, even possibly death. I mean that's a four, five thousand pound automobile coming at 30, 40 miles an hour. He was lucky, very lucky," said Chief Stillman. Related Video News Source: WJW Auto News Dodge cleveland challenger

Dodge Challenger spied exercising supercharged Hellcat Hemi V8

One of the prime complaints against the Dodge Challenger is that, even in SRT8 guise, its 470 horsepower is responsible for hauling over 4,200 pounds of vehicle. For comparison, the 420 hp in the Ford Mustang GT only has to deal with 3,618 lbs. Things only get worse from there, as the higher-performance variants of both the Mustang and the Chevrolet Camaro are far more powerful than an SRT8 without adding on much heft.
So what is Chrysler to do? The correct answer is add a whole lot more grunt to its hefty two-door and even the odds. That's where the all-new Hellcat engine comes into play. We reported on this engine in May, and suggested that the Hellcat, a supercharged powerplant based on a 6.4-liter V8, would easily generate 500 to 570 hp and could likely arrive boasting more than 600 ponies.
Chrysler's ace in its sleeve has now been spied testing, with a number of Hellcat-equipped Challengers running the potent new engine both in more urbanized areas and under the sun of Death Valley. The hoods on these testers have been raised to accommodate the engine, and that camouflage over the fascias of these prototypes is there to hide a larger air intake. We also note what appears to be a new split grille under wraps. As for power output, our spies are now suggesting a Viper-equalling 640 hp from the Hellcat-equipped cars.