2001 Dodge Ram 3500 Rack Body/flat Bed Dually on 2040-cars

Auto blog

An inside look at Mopar's SEMA fleet

Mopar is heading to the SEMA show in Las Vegas with a fleet of customized vehicles that appeal to enthusiasts of all stripes. There's a Dodge Viper ACR concept that follows in the lineage of the supercar's great road racing past, and a custom Ram ProMaster that might just be the ultimate outdoor party machine.
We got an inside look at Mopar's cars that will be on display at the show, which also include a Dodge Challenger T/A concept, two crazy Jeeps and a Ram 2500 Outdoorsman that could change the way you camp. While these are some of our favorites, Mopar is bringing plenty to SEMA, so let us know your top choices in the comments section.

Speedkore roaring into SEMA with twin-turbo AWD Charger Hellcat Widebody

Speedkore Performance is nowhere near finished with the Dodge Charger. At last year's SEMA show, the Wisconsin-based tuner showed a 1970 Charger Evolution with carbon and aluminum body panels, and a 996-horsepower Hellcat engine yoked to a six-speed transmission. This year the company teased a profile rendering of a 2020 Charger Hellcat Widebody on Facebook with the line, "All we're going to say is this all-wheel drive, twin-turbo, widebody Charger is going to be unveiled at the Magnaflow booth." Mopar Insiders extracted a tad more information, the first being that we're in for another tuned version of the 6.2-liter Demon Hemi V8 that's swapped its supercharger for twin turbos, and produces more than 1,000 horsepower. Last year, alongside that 1970 Charger, Speedkore unveiled a twin-turbo Hellcat-powered Demon making almost 1,400 horsepower. We don't know yet if this year's Charger will match that output — or exceed it — but we have a benchmark. An all-wheel-drive powertrain divides those horses so the tires have a chance of conquering them. Speedkore's mum on the mechanicals; the firm could have swiped a Grand Cherokee Trackhawk AWD unit and beefed it up, or created its own system.  Some of the steel body panels get carbon fiber replacements, and see those two holes in he front wheel arch? Those are exhaust outlets. MagnaFlow created a custom exhaust with a driver-selectable switch to port gases out the front, say at the track when decibels don't matter, or to send waste through MagnaFlow mufflers and out the rear pipes when silence is required.  The reveal happens at the Magnaflow booth in SEMA's Central Hall on November 5. Those that can't make the show can watch the reveal on MagnaFlowÂ’s Facebook page.

The Dodge Demon gets a Drag Mode and a lesson in Newtonian physics

It's Thursday morning, which means we have more news on the upcoming Dodge Demon, the pumped-up Challenger Hellcat variant that's looking to cause mayhem at a drag strip near you. This week's video, "Third Law," shows the Demon's revised suspension in action and displays another one of SRT's cryptic messages. Dodge claims that the 6.2-liter supercharged Hemi V8 in the Hellcat twins is compromised because it's fitted to a car that needs to be comfortable on the street in addition to a performer on the drag strip. Not so with the Demon, as Dodge says the car is "designed to be highly competent in all drive modes and configurations," including the all-new Drag Mode. Dodge says details about the new mode will trickle out over the next few weeks, but all the info this week focused on suspension. The "Third Law" in this week's title refers to Isaac Newton and motion: "When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body." We're not sure what Newton would have thought seeing the sidewall wrinkling Nitto NT05R drag radials in action, but he'd probably have a reaction of some sort himself. An ideal suspension setup for the drag strip makes for a poor setup on the road. As Dodge puts it, the "old school" way to set up a drag car was to "get the quickest reacting springs upfront, the softest rebound front shocks that wouldn't restrict the springs' reaction, remove any restrictions (sway bar) and increase the compression of the rear shocks." This would give a car great front to rear weight transfer but made for very poor lateral direction control, meaning minor corrections were difficult. The Demon's Drag Mode will use electronics to give the car the best combination of launch and lateral stability. Dodge listed some of the parts to help aid in this goal. They also gave us a few equations that we can't make sense of. Let us know if you have any clues. Hardware: 35 percent lower rate front springs/28 percent lower rate rear springs 75 percent lower rate hollow front sway bar/44 percent lower rate rear sway bar Drag-tuned Bilstein Adaptive Damping Shocks Software: Rear = F/F and Front = F/S F/F – F/S maintained @ wide open throttle (WOT) F/F – F/F < WOT Traction control disabled/ESC maintained Result: 13.5=575@500 Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.