1998 Dodge Ram 3500 4x4 Dually Manual Trans. Cummins Diesel on 2040-cars

Auto blog

Stellantis previews 4 electric platforms: Here's how they'll be used

Stellantis EV Day is hitting hard and fast this morning, with big news coming from Dodge and Ram and Jeep and the rest. But to support those brand transformations, a core initiative within Stellantis will help it become a leader in electrification. To do that, the group is developing platforms and technologies with cross-shared components and systems. This starts with four flexible BEV platforms: STLA Small, STLA Medium, STLA Large and STLA Frame. As for targeted numbers, they’re lofty: By 2024, Stellantis aims for over 500 miles of range, 0-62 mph in 2 seconds and charging 200 miles of range in 10 minutes. The four platforms will offer battery capacities from 37 kWh to more than 200 kWh. More specifically, STLA Small will offer 37-82 kWh and up to 300 miles of range. STLA Medium will have 87-104 kWh and up to 440 miles. STLA Large will provide 101-118 kWh and up to 500 miles of range. The truck-focused STLA Frame will provide 159-200+ kWh and up to 500 miles of range (and will support an electric Ram 1500 pickup). Chrysler EV Front 34 View 8 Photos Stellantis has big plans for the STLA Large platform, and is currently developing eight vehicles for it in the next three to five years. Examples of possible vehicles shown include a midsize Ram truck and a Jeep off-roader that could fight against the likes of the Toyota 4Runner. Stellantis design boss Ralph Gilles could be seen in a presentation looking over a Chrysler electric crossover based on this platform. We also saw a Wagoneer badge teased momentarily. There was a rendered silhouette of a crossover that looked like it could compete with the Ford Mustang Mach-E. Gilles said the platform would allow Stellantis to “create a long-range luxury sedan, an all-conquering muscle car, a heart-of-the-market DUV, a heart-of-the-market SUV, a very capable Jeep off-roading white-space opportunity vehicle as well as a new mid-sized truck.” See for yourself in this video starting at the 90-minute mark. As for powertrains, Stellantis is developing three electric drive modules with a shared, scalable inverter, and other common components, as well as in-house software to control them. Those drive units will offer from 70 to 330 kW (94-402 horsepower). More specifically, one EDM will provide 70 kW, a second will provide 125-180 kW, while the most potent can produce 150-330 kW.

Big rig gets blown over on Wyoming freeway, flattens police cruiser

A big rig navigating a stretch of windy Wyoming highway last week was blown over by high winds and landed on a Wyoming Highway Patrol cruiser. According to CBS News, three Wyoming Highway Patrol troopers responded to an accident along Interstate 80 near Elk Mountain on February 7. While the troopers were out of their cars assisting the crash victims, a white Volvo semi-truck lumbered up I-80 toward them. Wind gusts in that part of Wyoming were clocked in at up to 90 miles per hour on Tuesday, and one of them caught the semi as it neared the parked cruisers. Video from one of the cruiser's onboard cameras showed the big rig drift to the right as a big gust hit the trailer. Slowly, the whole rig tipped over and flattened one of the parked cruisers. The truck then slid a few feet on its side and came to a stop just aft of the cruiser. None of the troopers were injured in the incident, and two people in the truck came out of it unhurt as well. Patrol Lieutenant David Wagener told KGWN that that stretch of I-80 was closed on Tuesday to lightweight, high-profile vehicles. The truck driver was cited for the incident. High winds are no joke, and vehicles getting blown around or even clean off the road is a pretty common phenomenon. Way back in 2011, a truck got blown over in Utah. Then there was a train that got blown off a bridge in Louisiana in 2015. Related Video: News Source: CBS News, KGWN Auto News Dodge Volvo Driving Safety Truck Commercial Vehicles Police/Emergency Sedan semi truck rollover wyoming

A look at the Dodge Demon's drag settings, modes, and go-fast tech

In the same video that gave us a peek at the 2018 Dodge Challenger SRT Demon's performance stats, there's a serious dump of info on the tech and tools that will likely help this muscle coupe slaughter drag strips. Dodge has outlined a few of them for us and we're using the power of inference to figure out the rest. Here's what we've gathered. A lot of these hints come from the Demon's version of Performance Pages, the infotainment screens that show what SRT models are doing and let the driver change the powertrain and chassis setup. There are a lot of Demon-only features, including line lock, a quick cooldown mode for the supercharged engine, and data recording. And of course there are pages to show a digital time slip with acceleration and braking figures, a g-load plot, and lots of gauges to track temps and levels. The engine output is shown in the video on a special Dyno page. It tracks horsepower and torque over time on the upper graph, and engine rpm and shift points on the lower graph. And we think it's still hiding something. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Any good drag car has a line lock, allowing the driver to lock the front brakes and leave the rears free to do a nice tire-warming (or tire-shredding, depending on length) burnout. Ford has it on the Mustang, Chevy puts it on the ZL1, and now Dodge is adding it to the Demon. It should help get the giant Nitto tires up to temp for a drag run. And once the tires are warm, there's launch control, just like on the SRT Hellcat, with selectable rpm to dial things in for the conditions. The Demon also has a shift light in the cluster, and the driver can set a shift point individually for each gear. After each drag run, you can activate Quick Cooldown, which Dodge says uses the first production application of After-Run Chiller – it runs the cooling fan and intercooler coolant pump with the engine off until the coolant reaches its target temp. It's shown in one of the slides above. The checklist on the left side of that page suggests it requires a set of conditions be met to work: engine off, hood open, and sufficient battery level. This further reinforces our theory that the supercharger is going to make big boost, beyond the Hellcat's 11.6 psi. And while you're waiting for the supercharger to cool off for another run, you can review the performance data the car records.