03 Ram 3500 Slt Regular Cab Drw 4wd Cummins Only95k.miles Tx! on 2040-cars

Auto blog

Dodge Durango Shaker concept: A 392 V8 in front of six Viper seats

When done right, a parts-bin special can be a beautiful thing. This Dodge Durango Shaker concept for the 2016 SEMA show is one such vehicle, and it's easily our favorite Mopar debuting in Vegas. The key, of course, is pulling from the right bins. Take a tour and you'll see Charger, Challenger, and Viper pieces grafted onto this slick crossover. The featured special part is the big, 6.4-liter 392 Hemi V8 that's been dropped under the hood; it's sourced from the SRT Challenger and Charger where it makes 485 horsepower and 475 pound-feet of torque. With that in place, the fabricators cut a big hole in that hood for the Challenger's awesome optional shaker scoop. It wasn't an easy installation; it required a custom spacer for the intake to make sure everything lined up with the hole properly. View 17 Photos Apparently there were some Viper seats lying around, so six of them were stuck into this Durango. Makes sense. It does lose a bit of people-carrying capability as a result, since only two seats fit in each row, and the seats don't fold for extra cargo room. A Dodge spokesperson attested to the fact that all three rows are usable, if not totally comfortable. But then stock third-row seats aren't always that comfortable anyway. Seriously, though, Viper seats. We don't care how comfortable or usable the result is. Although you might not give it a second thought, even the fuel filler needed some special attention. This piece was also lifted from a Dodge Challenger, and it was taken along with the surrounding sheet metal. Because of the different orientation of the filler cover on the Challenger, the builders decided the easiest way to get it to fit was to chop the fuel filler section out and weld it onto the Durango. The designers also put a little blue Stig on the cover. And those are just the cool parts that were hard to install. This Durango features plenty of other slick details, like the custom bumpers, fender flares, and side skirts. Everything is painted B5 Blue with matte black and carbon accents all around. Up front, the bumper hides a pair of fog lights stolen from a Challenger Hellcat – and yes, they're the ones with intakes in the middle. The grille is also a custom piece, losing the standard crosshair design for better airflow. The fender flares cover up some seriously wide, 305-section tires at all four corners, which are hauled down by Hellcat brakes. The rear bumper bumper contains a stylish center-exit exhaust with dual tips.

Weekly Recap: Ferrari plans to gradually increase production by 2019

Ferrari has long been known for the exclusivity of its performance machines. It's on a different level than Porsche, BMW, and Mercedes. But as it transitions to a new era of independence from Fiat Chrysler, Ferrari is going to get a little less exclusive. It's by design, and it means a subtle, slow ramp-up of production – a move Ferrari believes will ensure its future by meeting growing demand in new markets. The strategy was detailed in SEC documents filed this month as part of the company's pending stock offering. The files reveal Ferrari will gradually increase shipments to about 9,000 units per year by 2019. This is a reversal of Ferrari's 2013 plans to cap production at 7,000 cars annually, which it hit on the nose that year. Ferrari shipments inched up to 7,255 in 2014, though that's down from 2012's record tally of 7,405. Ferrari is a vastly different operation than it was in 2013. Longtime chairman Luca di Montezemolo stepped down last fall, and FCA chief executive Sergio Marchionne has been overseeing the company since then. Its IPO has attracted high levels of attention from enthusiasts and investors. As expected, demand has reportedly outstripped the availability of the stock, which has an estimated offering price of $48 to $52 a share. Speaking of more Ferraris, the company revealed a limited-edition model this week called the F12tdf (shown above). Based on the F12 Berlinetta, the car is a salute to the Tour de France endurance auto race that Ferrari dominated in the 1950s and '60s. The V12 engine's output increases to 769 horsepower, while weight is cut by 243 pounds – allowing for a sprint to 60 mph in 2.9 seconds. Dramatic carbon-fiber elements and a radical redesign of the body panels give the F12 a more dramatic look. It will be limited to 799 units over the life of the car. If this is how Ferrari is increasing production, we're more than okay with the company's new strategy. OTHER NEWS & NOTES Tesla software unlocks Autopilot features Tesla released the latest version of its software for the Model S this week, which allows the all-electric sedan to drive in a semi-autonomous state called Autopilot. Tesla Version 7.0 enables the Model S to maintain lane position, change lanes by touching the turn signal, and manage the car's speed using an advanced, traffic-sensing cruise control. It also has a parallel parking feature, which searches for open spots and then parks your Tesla.

Dodge Durango poised for SRT's devilish power-up

Does the world need a 707-horsepower Dodge Durango Hellcat? It looks like it's a possibility, according to recent spy shots of a suspicious test mule. But it could also be a Durango powered up with the FCA US 6.4-liter V8 that makes 475 hp. Spy shooters report that the mule captured here sounds like the Hellcat-powered Dodge Chargers and Challengers. Hidden design cues like the fascia suggest this Durango has truly devilish power. There's also a bulging hood with an air intake under the camouflage. So it could be a Durango Hellcat. It's also possible Dodge is dropping the 6.4-liter V8 used in the Grand Cherokee SRT under the hood of the Durango. Engine sharing makes sense, since both FCA SUVs are based on the same platform and built at the same factory in Michigan, though the Durango is longer to accommodate a third row. It is also more logical Dodge would add the 475-hp mill to the Durango's lineup first before going all the way to the 6.2-liter 707-hp Hellcat engine. The most powerful current Durango has a 360-hp 5.7-liter Hemi V8. We expect the Durango will get a refresh for 2018. Related Video: Featured Gallery 2018 Dodge Durango SRT Spy Photos View 16 Photos Spy Photos Dodge SUV Performance