Laramie Sunroof 2008 Dodge Ram 2500 4x4 Diesel Mega Cab Cummins Sb 6.7l Wheels on 2040-cars

Auto blog

Dodge recalls 121,603 examples of Dart for loss of brake assist

Dodge will recall 121,603 worldwide examples of the 2013-2014 Dart with the 2.0- and 2.4-liter engines because of possible loss of power brake assistance. The company reports two minor injuries and seven accidents potentially related to this problem. The affected models have build dates before Jan. 24, 2014. There are 105,458 of these vehicles in the US; 11,996 in Canada; 3,705 in Mexico; and 444 outside of NAFTA. This campaign doesn't affect Darts with the 1.4-liter engine. These vehicles' brake-booster vacuum tube routing can potentially allow oil to access and eventually to degrade the brake booster diaphragm. If this happens, then the vehicles could lose braking assist. The brakes themselves would continue to work, but the driver would experience longer stopping distances. A pop or similar sound of a vacuum leak sometimes precedes the problem, according to the automaker. Dealers will inspect the components and replace the vacuum tube. If technicians find oil in the tube, they'll also swap out the vacuum pump, brake booster, and master cylinder. Affected owners will receive notice from the company within the next 60 days. Statement: Vacuum-tube Assembly December 3, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 105,458 compact sedans in the U.S. to inspect and replace vacuum-tube assemblies and certain other components, as required. Some of the affected vehicles may be subject to oil migration that could affect their brake systems' power-assist feature. Foundation brake function is unaffected. However, if this condition occurs, the driver may notice hard pedal-feel on brake application, and longer distances may be required to stop the vehicle in emergency situations. An FCA US investigation identified certain model-year 2013-14 vehicles equipped with 2.0-liter and 2.4-liter engines, may have brake-booster vacuum-tube routing that inadvertently allows oil to reach the brake booster diaphragm, if ever the vacuum-pump check valve fails. Oil may degrade the diaphragm and lead to a loss of brake-assist – a feature that helps reduce stopping distances. FCA US is aware of two minor injuries and seven accidents that are or may be related to this condition. The recall is limited to model-year 2013-14 Dodge Dart sedans produced before Jan. 24, 2014. It also affects an estimated 11,996 cars in Canada; 3,705 in Mexico and 444 outside the NAFTA region. Vehicles equipped with 1.4-liter engines are excluded.

Dodge Journey and Fiat Freemont engine-cover recall affects 350k CUVs

FCA is recalling 349,731 examples of the 2011-2015 Dodge Journey and Fiat Freemont worldwide to better secure their engine covers. Of these affected vehicles, there are 144,416 in the US, 43,679 in Canada, 46,231 in Mexico, and 115,405 elsewhere. About 10 percent of them are also still at dealers, according to the automaker. Only models with the 2.4-liter four-cylinder engine are affected by this campaign. According to the company, the engine covers on these vehicles can be dislodged, and this can pose a fire risk if the loose part comes in contact with hot exhaust components. Warning signs of this happening include a noise under the hood, burning smell or a light on the instrument panel. The problem was discovered after three incidents on rough roads in Chile, and there was one minor injury there. According to FCA US spokesperson Eric Mayne to Autoblog, there have been eight occurrences of this issue reported in the US, but these were all related to "heat damage." There have been no reported injuries here. To fix the problem, dealers will install new engine-cover retainers on the affected models. These repairs will begin in August. As always for recall repairs, owners won't be charged. Statement: Engine Cover July 22, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 144,416 crossover utility vehicles (CUVs) in the U.S. to better secure their engine covers. Engine covers in certain vehicles may become dislodged. If they come in contact with exhaust components, it may pose a fire risk. This condition was discovered during an FCA US investigation of three incidents in Chile. In each case, the vehicle had been driven extensively on unpaved or uneven surfaces. The Company is aware of a single related injury, described as minor. Affected are 2011-2015 Dodge Journey and Fiat Freemont CUVs equipped with 2.4-liter, four-cylinder engines. FCA US will install upgraded engine-cover retainers in these vehicles. The remedy will be available when customer notification begins next month; service will be performed free of charge. Vehicles equipped with six-cylinder engines are not affected. Additional Journey and Freemont populations also are subject to this campaign. They comprise an estimated 43,679 vehicles in Canada; 46,231 in Mexico; and 115,405 outside the NAFTA region. Of the 349,731 total vehicles subject to this campaign, approximately 10 percent remain in dealer hands.

The Dodge Demon gets a Drag Mode and a lesson in Newtonian physics

It's Thursday morning, which means we have more news on the upcoming Dodge Demon, the pumped-up Challenger Hellcat variant that's looking to cause mayhem at a drag strip near you. This week's video, "Third Law," shows the Demon's revised suspension in action and displays another one of SRT's cryptic messages. Dodge claims that the 6.2-liter supercharged Hemi V8 in the Hellcat twins is compromised because it's fitted to a car that needs to be comfortable on the street in addition to a performer on the drag strip. Not so with the Demon, as Dodge says the car is "designed to be highly competent in all drive modes and configurations," including the all-new Drag Mode. Dodge says details about the new mode will trickle out over the next few weeks, but all the info this week focused on suspension. The "Third Law" in this week's title refers to Isaac Newton and motion: "When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body." We're not sure what Newton would have thought seeing the sidewall wrinkling Nitto NT05R drag radials in action, but he'd probably have a reaction of some sort himself. An ideal suspension setup for the drag strip makes for a poor setup on the road. As Dodge puts it, the "old school" way to set up a drag car was to "get the quickest reacting springs upfront, the softest rebound front shocks that wouldn't restrict the springs' reaction, remove any restrictions (sway bar) and increase the compression of the rear shocks." This would give a car great front to rear weight transfer but made for very poor lateral direction control, meaning minor corrections were difficult. The Demon's Drag Mode will use electronics to give the car the best combination of launch and lateral stability. Dodge listed some of the parts to help aid in this goal. They also gave us a few equations that we can't make sense of. Let us know if you have any clues. Hardware: 35 percent lower rate front springs/28 percent lower rate rear springs 75 percent lower rate hollow front sway bar/44 percent lower rate rear sway bar Drag-tuned Bilstein Adaptive Damping Shocks Software: Rear = F/F and Front = F/S F/F – F/S maintained @ wide open throttle (WOT) F/F – F/F < WOT Traction control disabled/ESC maintained Result: 13.5=575@500 Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.