Hemi Powered Utility Body Ready For Work $ave!!! 6 Available Start @ $12490 on 2040-cars

Auto blog

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

2018 Dodge Challenger SRT Hellcat Widebody First Drive | Same snarl, more bite

By now, you've read a lot about the Dodge Demon, including our driving impressions from the drag strip. You've also heard a lot about the Challenger Hellcat, which we've had the pleasure of driving at Portland International Raceway, Willow Springs, and on our home turf of Woodward Avenue, both during the Dream Cruise and for an episode of AutoblogVR. Last week, Dodge and SRT invited us out to Indianapolis to sample the Demon, as well as the Durango SRT. Sandwiched between those two launches, however, was another distillation of Dodge's retro-cool coupe, the 2018 Challenger SRT Hellcat Widebody. The Widebody shares most of the guts of the standard Charger Hellcat, but went to the same cosmetic surgeon as the Demon. The Hellcat 6.2-Liter V8 with 2.4-liter-per-rev supercharger, producing 707 horsepower and 650 pound-feet of torque, is unchanged. It comes standard with a six-speed manual transmission, but our tester had the optional eight-speed automatic with steering wheel-mounted paddle shifters. It's 3.5 inches wider (look at those fenders!) than the standard Hellcat, though, which allows it to accommodate 20-by-11-inch "Devil's Rim" wheels. It shares its front splitter with the Demon, but retains the Hellcat's rear spoiler. The Widebody also features an electronic power steering system with selectable drive modes. It just slightly outperforms the standard Hellcat, as well, with better cornering grip, improved acceleration, and better braking (even though it shares the same Brembo brake package as the standard Hellcat). Dodge claims that the Widebody does the quarter-mile 0.3 seconds quicker, dropping it just out of the 11s to 10.9 seconds. 0-60 miles per hour drops from 3.5 to 3.4 seconds. Lateral grip increases by 0.04 G to 0.97 G on the skid pad. On the company's 1.7-mile road course, Dodge says the Widebody drops two seconds off its lap time compared to the standard Hellcat, finishing about 13 car lengths ahead. We spent our time with the Hellcat Widebody on the infield road course at Indianapolis Motor Speedway. Sliding into the car, the seating position is cozy and comfortable even with a helmet on, and we have no trouble adjusting our chair and steering column to ideal placement. The infotainment display shows us our drive settings for the next few miles: the transmission and suspension are in Track Mode, steering is set to Sport, with traction set to Street. We fire up the car with an instructor in the right seat, and head out of the pit lane.

Inline-6 Hemi replacement on the cusp of production from Stellantis

It appears that Stellantis is ready to put its long-rumored inline-six into production at its Saltillo, Mexico plant, possibly marking the beginning of the end of Chrysler's long-running 5.7L Hemi V8. But so far, the automaker's American brands have remained mum on where exactly the new turbocharged "Tornado" I6 may land. Stellantis powertrain blog Stellpower (by way of Muscle Cars & Trucks) spotted an entry for a new "GME T6" inline-six engine on the Saltillo facility's web site, suggesting that it was either in production or close to it. That entry has since been removed, but the mystery remains.  We've been hearing tidbits here and there about this new inline engine for years, but this is the first time we've seen anything suggesting its arrival is imminent. Usually, such a significant powertrain update would coincide with the launch of a new product to showcase it. So far, Stellantis has remained mum, even overseas, about where this engine is destined to reside. 2022 model year vehicles are likely off the table entirely.  But while it's common for new engines to debut with new cars and trucks, it's not a universal truth. Ford's Coyote V8 missed the corresponding Mustang refresh by a year, for example, orphaning the 2010 model and its much-needed styling updates with the old 4.6L V8 (and the 3.8L V6, for that matter; the 3.7L Duratec was also late to that party). Even sticking just to Stellantis, the JL Wrangler's powertrains have been a work in progress since it arrived back in 2018. The standard V6 and 2.0-liter turbo-4 debuted at launch; the EcoDiesel, 392 and 4xe all came later.  And 4xe may be the model by which to measure our expectations. Its introduction didn't come completely out of nowhere, but it was rather sudden for what turned out to be such a solid offering. That bodes well for the company's existing Hemi-powered trucks and SUVs. The Ram 1500, Jeep Grand Cherokee and Wagoneer are all strong candidates to receive the new Hemi replacement, as all would greatly benefit from even small improvements in fuel economy. If there's to be a future for the Dodge Charger and Challenger and Chrysler 300, they'd benefit too. And how about a Gladiator with the wick turned up, positioned as its equivalent to the Wrangler 392. Turn that Tornado into a Dust Devil. Don't worry; we've got plenty more where that came from.  Related Video This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.