2012 Dodge Ram 2500 Power Wagon Crew 4x4 Hemi V8 17k Mi Texas Direct Auto on 2040-cars

Auto blog

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.

Dodge Durango gets performance Mopar options for R/T, SRT

Fiat Chrysler is showing new performance add-ons for the 2018 Dodge Durango R/T and SRT models at the Chicago Auto Show, including the familiar Dodge dual center stripes and a new Mopar exhaust system. The 475-horsepower SRT model, which is powered by a 6.4-liter Hemi V8, will also offer a lowering spring kit and a carbon-fiber instrument panel. The signature two-stripe treatment blankets the three-row SUV from the front to rear fascia and is tailored to the signature NACA duct-hood vent. It'll come in five different colors — bright blue, flame red, gunmetal low gloss (metallic finish), low-gloss black and sterling silver — and retail for $1,195 starting in March. View 7 Photos Mopar developed its new bolt-on performance exhaust systems with Dodge SRT engineers and designers to improve flow and achieve that sweet sound. It features a chromium 304 stainless steel construction to make it more resistant to corrosion, with stainless steel band-style clamps and welded and polished 4-inch tips. It costs $1,595 for the Durango R/T and is available now. On the SRT, the price goes up to $1,850, with the package available in the second quarter. New Mopar springs improve the Durango SRT's high-speed cornering stability and consistency by lowering the SUV an average of 15 millimeters, or 0.6 inches. They were developed with proprietary Dodge SRT data not available to the aftermarket to tune the lowering springs to the factory dampers, giving the vehicle less rear-end squat during acceleration, less nose dive while braking and reduced body roll on corners. MSRP on the package, which is available now, is $325. For just under $2,500 you can get the SRT Interior Appearance Group package, which adds a premium-wrapped carbon-fiber instrument panel and door bezels, Dinamica soft-touch headliner and accent paint on speaker trim rings. The Chicago Auto Show is open to the public Feb. 10-19. Related Gallery 2018 Dodge Durango R/T, SRT Mopar performance options Image Credit: Live photos copyright 2017 Drew Phillips / Autoblog.com Chicago Auto Show Dodge SUV Performance tuning sport utility vehicle

Happy Hellcat Halloween

Happy Halloween, everybody. There's no real Hellcat news in this post. No growl of the second-scariest Dodge Challenger SRT's 707-horsepower engine, no shriek of its supercharger. Just a Hellcat on a photo shoot. A little eye candy on Halloween. In a graveyard. With a black cat. (No cats were doomed to hell in the making of this feature.) But a Hellcat is a good kind of scary, so here are some of our previous galleries. And may a Hellcat cross your path soon. View 18 Photos View 17 Photos View 80 Photos Related Video: