2011 Ram 2500 Slt Quad Cab Turbo 6.7l I6 Cummins 4wd Satellite on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Dodge Journey and Fiat Freemont engine-cover recall affects 350k CUVs

FCA is recalling 349,731 examples of the 2011-2015 Dodge Journey and Fiat Freemont worldwide to better secure their engine covers. Of these affected vehicles, there are 144,416 in the US, 43,679 in Canada, 46,231 in Mexico, and 115,405 elsewhere. About 10 percent of them are also still at dealers, according to the automaker. Only models with the 2.4-liter four-cylinder engine are affected by this campaign. According to the company, the engine covers on these vehicles can be dislodged, and this can pose a fire risk if the loose part comes in contact with hot exhaust components. Warning signs of this happening include a noise under the hood, burning smell or a light on the instrument panel. The problem was discovered after three incidents on rough roads in Chile, and there was one minor injury there. According to FCA US spokesperson Eric Mayne to Autoblog, there have been eight occurrences of this issue reported in the US, but these were all related to "heat damage." There have been no reported injuries here. To fix the problem, dealers will install new engine-cover retainers on the affected models. These repairs will begin in August. As always for recall repairs, owners won't be charged. Statement: Engine Cover July 22, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 144,416 crossover utility vehicles (CUVs) in the U.S. to better secure their engine covers. Engine covers in certain vehicles may become dislodged. If they come in contact with exhaust components, it may pose a fire risk. This condition was discovered during an FCA US investigation of three incidents in Chile. In each case, the vehicle had been driven extensively on unpaved or uneven surfaces. The Company is aware of a single related injury, described as minor. Affected are 2011-2015 Dodge Journey and Fiat Freemont CUVs equipped with 2.4-liter, four-cylinder engines. FCA US will install upgraded engine-cover retainers in these vehicles. The remedy will be available when customer notification begins next month; service will be performed free of charge. Vehicles equipped with six-cylinder engines are not affected. Additional Journey and Freemont populations also are subject to this campaign. They comprise an estimated 43,679 vehicles in Canada; 46,231 in Mexico; and 115,405 outside the NAFTA region. Of the 349,731 total vehicles subject to this campaign, approximately 10 percent remain in dealer hands.

Dodge Durango gets performance Mopar options for R/T, SRT

Fiat Chrysler is showing new performance add-ons for the 2018 Dodge Durango R/T and SRT models at the Chicago Auto Show, including the familiar Dodge dual center stripes and a new Mopar exhaust system. The 475-horsepower SRT model, which is powered by a 6.4-liter Hemi V8, will also offer a lowering spring kit and a carbon-fiber instrument panel. The signature two-stripe treatment blankets the three-row SUV from the front to rear fascia and is tailored to the signature NACA duct-hood vent. It'll come in five different colors — bright blue, flame red, gunmetal low gloss (metallic finish), low-gloss black and sterling silver — and retail for $1,195 starting in March. View 7 Photos Mopar developed its new bolt-on performance exhaust systems with Dodge SRT engineers and designers to improve flow and achieve that sweet sound. It features a chromium 304 stainless steel construction to make it more resistant to corrosion, with stainless steel band-style clamps and welded and polished 4-inch tips. It costs $1,595 for the Durango R/T and is available now. On the SRT, the price goes up to $1,850, with the package available in the second quarter. New Mopar springs improve the Durango SRT's high-speed cornering stability and consistency by lowering the SUV an average of 15 millimeters, or 0.6 inches. They were developed with proprietary Dodge SRT data not available to the aftermarket to tune the lowering springs to the factory dampers, giving the vehicle less rear-end squat during acceleration, less nose dive while braking and reduced body roll on corners. MSRP on the package, which is available now, is $325. For just under $2,500 you can get the SRT Interior Appearance Group package, which adds a premium-wrapped carbon-fiber instrument panel and door bezels, Dinamica soft-touch headliner and accent paint on speaker trim rings. The Chicago Auto Show is open to the public Feb. 10-19. Related Gallery 2018 Dodge Durango R/T, SRT Mopar performance options Image Credit: Live photos copyright 2017 Drew Phillips / Autoblog.com Chicago Auto Show Dodge SUV Performance tuning sport utility vehicle