2010 Dodge Ram 2500 Crew Cab 4x4 Diesel Rear Cam 70k Mi Texas Direct Auto on 2040-cars

Auto blog

2013 Dodge Challenger R/T Redline revs into Chicago

When Dodge released the Challenger Rallye Redline last year, it brought a new dimension of styling to the car's classic muscle car lines, but it was only available in V6 form lacking the oomph to back up its sinister appearance. To remedy that situation, Dodge is unveiling the Challenger R/T Redline, powered by a Hemi V8 engine, at the Chicago Auto Show.
Other than the extra cylinders, most of the R/T's Redline package carries over from the Rallye model including the custom-look 20-inch black chrome wheels with red paint accents, but the R/T version of the package gets more of a retro look to the side stripes with graphite graphics featuring Redline lettering. Cars equipped with the six-speed manual transmission will get a performance-tuned, low-restriction exhaust allowing the engine to produce 375 horsepower and 410 pound-feet of torque; cars with the five-speed auto are rated at 372 hp and 400 lb-ft, but they do offer a bright chrome Mopar t-handle shifter and steering wheel paddle shifters.
The R/T Redline Group is offered only on cars painted in Billet Silver, Granite Crystal, Bright White and Pitch Black, and it adds just $1,995 to the MSRP of the Challenger R/T (starting at $31,990) and the Challenger R/T Plus (starting at $33,990), which adds features like Nappa leather and Boston Acoustics speakers.

I sold my Viper, but the memories I'll keep

The following is written by auto industry veteran Tow Kowaleski. The words are his own, but the memories now belong to everyone thanks to his willingness to share. If you're an industry veteran with a story to share, contact us at tipsATautoblogDOTcom.
It became the flame that started the fire of belief in the next life of Chrysler.
I just sold a car. Nothing new. Millions do it every day. But my car was a 1995 Dodge Viper, so maybe it was a bit more unique since just 12,000 were built. And like others selling a car that's been a part of the family for close to 20 years, this was a confluence of emotions for me. I was sad to see it go, but happy to have the cash and one less big, shiny, under-utilized object in my life.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat