2008 Dodge Ram 2500 Lone Star Quad 4x4 Diesel 6pass 20k Texas Direct Auto on 2040-cars

Auto blog

Dodge Hornet supposedly snapped inside Alfa Romeo Tonale factory

It appears that someone in Stellantis' Pomigliano d’Arco Assembly Plant in Italy couldn't keep their cellphone to themselves. Video uploaded to the Alfa Romeo Club Italia Facebook page, then quickly removed, purports to show Dodge's brand-engineered version of the Alfa Romeo Tonale in the same factory where the Alfa will be built. The Dodge is expected to be called the Hornet, and there are a few differences between it and and Alfa Romeo, which is understandable. But if the screenshots on Twitter are accurate, then the Dodge looks a lot closer to the Alfa Romeo than perhaps anyone expected. The front fascia and hood fall in line with Dodge's design language. The Alfa grille is replaced by a narrow, stepped upper grille, and the hood is one of the vented units similar to those available for Dodge's R/T performance trims. And as Mopar Insiders noticed, the silhouette of this car's front end matches a vehicle silhouette Dodge showed during Stellantis' 2021 EV Day.   Inside, the Italian brand's crest in the steering wheel center cap is replaced by Dodge's twin slashes, and the steering wheel has been stripped of the large, curved paddle shifters the Tonale showed on its debut. There's still a start/stop button on the steering wheel, but where the Tonale has a driving mode dial on its dash, this supposed Hornet has another start/stop button. Dodge's push-to-start buttons are usually on the instrument panel, so our guess is that the wheel is a holdover for testing. On the center tunnel, the parking alert buttons and Italian Tricolore flag on the Alfa Romeo are replaced by three different buttons.   We've known Dodge has two electrified vehicles on the way, and the Hornet name has been low-key buzzing for two years. Fiat Chrysler applied to trademark the name in the U.S. in March 2020; at the time, it was thought a vehicle with that name could replace the Journey. In 2021, a July rumor out of Italy was the first whisper of the Hornet name being attached to the Alfa Romeo Tonale. In August, when Stellantis CEO Carlos Tavares said Dodge would get a PHEV in 2024, watchers pegged that model as the Hornet. That hybrid powertrain would show a year after the vehicle's launch, the Hornet anticipated as a 2023 model with the Tonale's turbocharged 2.0-liter four-cylinder. That engine could get the same 256 horsepower and 295 pound-feet of torque as the Tonale, or be boosted to satisfy Dodge's performance credentials.

Dodge launches 1 of 1 Viper configurator

Get comfortable because you might be spending a good chunk of time in front of the computer on this. The configurator for the 2015 Dodge Viper GTC 1 of 1 is now online, and it's a ton of fun to play around with. Mechanically, the GTC is just like every current Viper with a 645-horsepower, 8.4-liter V10. But for the special editions Dodge lets buyers tinker with practically everything aesthetic thing. For the exterior alone, the choices include some 8,000 available body colors, two stripe styles in innumerable shades, two hood designs and various brake caliper hues. Plus, there are 16 upholstery colors inside, and options like red seat belts and carbon fiber trim. Dodge reckons there are over 25 million possible combinations, and the models are available to customers on a first-come-first serve basis for each model year. Although, two people wanting identical cars seems pretty unlikely. The configurator is a beauty too. It makes all of these myriad options extremely easy to pick from, and there are even four resolution settings to see your creation in the best possible way. Prices for the GTC start at $94,995 and deliveries are set to start in the second quarter of the year. Although, even if you have no intention of buying one, specifying these custom coupes is still highly entertaining.

Mopar Hellephant crate engine sells out in 48 hours

This happened so quickly that we're only just catching up with it. Mopar opened pre-orders on the 7.0-liter Hellephant Hemi crate engine on April 26, which is Hemi Day. According to Allpar, hubbub on social media not long after that day claimed Mopar had gone through all of its Hellephant stock. When Allpar asked Fiat Chrysler for clarification, a spokesperson e-mailed, "Given the high demand and the hand-built, time-intensive build process, we have closed preordering for the 426 Hellephant Supercharged HEMI crate engine. Based on preorders, the engine sold out in just two days. Customers can visit www.cratehemi.com to receive future information and updates on the 'Hellephant' engine." No one is certain how many engines Mopar sold. Allpar wrote, "Industry insiders believe Mopar may be making around 100," but reiterated that it's a guess. The engine and the ordering process have their peculiarities. Mopar Insiders explained that Tool Engineering International helped create the 426-cubic-inch block, and that the Hellephant engine "shares nothing except for displacement with the rumored upcoming 7.0-liter 426 Hemi V8." On the Hellcat.org forum, a poster wrote that the engines "can only be sold through a dealer and that the dealers can only order 1 engine per week." The Hellephant doesn't come with Mopar's three-year, 100,000-mile warranty, either. During a press briefing last October, FCA officials said they weren't sure about offering any warranty. Based on the motor being given a part number starting with the letter P, there is a bit of protection, but it's a 90-day limited warranty covering "defects in materials or wokmanship," and only applies to engines not used in competition. For those who didn't get the opportunity to drop $29,995 for 1,000 horsepower and 950 pound-feet of torque, the best bet is to hope for the return of Apollyon's pachyderm. Motor1 wrote that "Rumors hint at... another limited run scheduled for next year due to overwhelming demand." That's thin thread to hang a Hellephant from, but it beats bupkis.