2006 Slt 5.9l Cummins Diesel 4x4 Regular Cab Power Options on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Jeep Wrangler 4xe's hybrid powertrain: Could it be headed to other FCA products?

On its own, the 2021 Jeep Wrangler 4xe plug-in hybrid is a big deal for the brand and the model line. It's the most powerful and most efficient Wrangler by significant margins, and it doesn't give up the off-road capability that makes the Wrangler so special. But another great thing about this hybrid powertrain is its potential to be transplanted into other FCA vehicles. Just to recap, the layout of the Wrangler's hybrid powertrain, front to back, is as follows: engine, clutch, electric motor, clutch, transmission. The engine is the same 2.0-liter turbocharged four-cylinder that's a standalone engine for the Wrangler. The transmission and electric motor are sort of one unit, with the motor and clutch replacing the torque converter of the transmission. And the transmission itself is the ubiquitous eight-speed ZF automatic gearbox. Its transmission code name is 8HP75PH. The ZF eight-speed is available in every FCA product with a longitudinally-mounted engine and rear-wheel drive or four-wheel drive, with variations in the amount of power and torque it can handle. Not only that, but the Ram 1500 and 2500 and the Jeep Wrangler and Gladiator all have powertrains that utilize the non-hybrid version of the 8HP75 transmission specifically. Even the gear ratios for that transmission as well as the 8HP70 used in the Jeep Grand Cherokee, Dodge Durango, Dodge Charger and Chrysler 300 are nearly identical to those in the 8HP75PH. And a Fiat-Chrysler representative confirmed that the transmission portion of the hybrid drivetrain is basically carry-over from the regular 8HP75. So a transplant could be a relatively simple process. As for which of these models would be the most likely to receive the hybrid powertrain first, the Jeep Gladiator and Ram 1500 would seem like good bets, since they likely have the most similar transmissions, and the Gladiator in particular because of its closely-related underpinnings to the Wrangler. Both are also highly profitable trucks that sell well and could justify the development costs of adapting another powertrain. And in the case of the Ram, there's the impending F-150 hybrid to think about. Although Ram isn't going after a fully electric model, a PHEV could be a nice middle ground. A potential limiting factor would be whether the hybrid powertrain would be sufficiently robust to handle heavy payload and towing demands, particularly over longer periods.

Watch this Dodge Viper get clawed to death

There's a scene in the James Bond movie, Casino Royale, where Daniel Craig's Agent 007 is captured by villain Le Chiffre, played by Mads Mikkelsen. Le Chiffre tortures Bond in a scene that is rather difficult to watch (especially for blokes) and impossible to describe on these digital pages (Google at your own risk). This video is the automotive equivalent of the Casino Royale torture scene.
It shows a Dodge Viper - a late, first-generation GTS judging by the center-exit exhausts - getting assaulted by a giant piece of heavy equipment. The large claw shows no mercy on the V10-powered sports car, rending its muscular curves into pieces and then running it over, just for good measure. It's a painful video to watch (and hear!), made worse because we don't know what the Viper did to deserve such a fate. About a third of the way through the video, the cameraman indicates that the man with the claw is a new operator from Chrysler, and it appears there may be some fire damage, but beyond that, we don't have much to go on.
Scroll down for the video but be warned, it isn't for the faint of heart.