2006 Dodge Ram 2500 Power Wagon Crew Cab Pickup 4-door 5.7l Slt 6-speed Manual on 2040-cars

Auto blog

FCA's large, LX-based RWD cars will stick around until 2020

Fiat Chrysler Automobiles plans to stick with the Dodge Challenger, Dodge Charger, and Chrysler 300 until at least 2020, reports Automotive News. The information comes from two unnamed sources and was loosely confirmed by details in the automaker's new labor contract with Unifor, Canada's auto union. The plan, according to two anonymous sources, is to lightly refresh the Challenger, Charger, and 300 until the vehicles make the switch to FCA's new Giorgio platform. The refresh, as Automotive News points out, will happen in 2018. The Giorgio platform currently underpins the Alfa Romeo Giulia and is expected to find its way to two of the three large American vehicles for the 2021 model year. At that time, FCA will discontinue either the Charger or the 300, claim AN's unnamed sources. If one of the vehicles were to go, it would most likely be the 300. The 300's LX platform would be approximately 15 years old in 2020 and the vehicle doesn't draw in as many sales as the Challenger or the Charger. The Charger made the switch from the LX platform in 2010 with the current model utilizing the mildly updated LD platform, while the Challenger recently moved from the LC platform to the LA platform last year. All of those rear-wheel-drive platforms are closely related. Automotive News points out that FCA CEO Sergio Marchionne stated that the new platform could be utilized across various applications in a conference call with analysts last month. The plan, according to the report, is to stretch and widen the Giorgio platform for the next-gen Challenger and Charger. The new platform is also rigid enough to allow the automaker to add a convertible to its lineup, which could lend further credence to rumors of an upcoming Barracuda. Hopefully, the move to the new Giorgio platform doesn't delay the all-wheel-drive Challenger GT AWD or the wide-body, Hellcat-powered Challenger ADR. We'll just have to wait and see. Related Video: News Source: Automotive News - sub. req. Chrysler Dodge Coupe Performance Sedan FCA fiat chrysler automobiles

This SEMA special drag race is absurdly awesome

The SEMA Show came and went last month, and it showed us a ton of heavily modded goodies to dream about during the long, cold winter. The Motor Trend Channel on YouTube is keeping the party rolling a little longer, though, with a drag race inspired by the aftermarket event. All of the hosts were supposed to borrow a vehicle from the show for the big race, but only two of them actually cajoled companies into lending their wares. Still, the result includes four very cool and extremely different examples of the breadth of the automotive hobby. First up, there's a 1955 Chevrolet with a 535-cubic-inch (8.8-liter) Hemi V8 stuffed under the hood. Appropriately, it's dubbed the Blasphemi, and with skinny tires up front, fat rubber in the rear and a stripped interior, this this is made to go very fast in a straight line. Next, there's a stock Dodge Challenger SRT Hellcat boasting 707 horsepower. Plus, host Jessi Lang has her dog riding shotgun for the race. A Chevy Sonic RS with some body mods, downpipe and intake is also competing. Finally, the most bizarre of the quartet is a custom 1958 Jeep Forward Control with a 5.7-liter Hemi V8 and treads to replace the wheels. Obviously, the Blasphemi and Hellcat are the only two that really have a chance of winning, but check out the video to see which one crosses the finish line first. News Source: Motor Trend Channel via YouTube Aftermarket Chevrolet Dodge Jeep Truck Coupe Hatchback Off-Road Vehicles Racing Vehicles Performance drag race dodge challenger srt hellcat

A Mazda Miata with a Hellcat V8 exists, and it can be yours

Mazda Miatas with V8 swaps aren't unusual. Kits are available to drop in LS V8s from GM, and some even let you drop in an old Ford 5.0-liter V8. But a Miata with a Hellcat V8 is something special, and this one can be yours. As Automobile spotted, it will go across the block at the Barrett-Jackson Las Vegas auction. This particular 1999 Miata has a build history you can check out for yourself, too. It was all chronicled on YouTube channel KARR. Obviously the Hellcat engine does fit between the wheels, but the hood had to be cut open for the intake manifold and supercharger to fit. The front bumper and lights have been changed to the 2001+ NB Miata design. According to the listing, it has suspension components from V8 Roadsters, a company that specializes in Miatas with twice the normal number of cylinders. In the middle of the car is a manual transmission, which connects to a Ford 8.8-inch differential that's been welded up. With that much power and an essentially locked rear diff, it should make for an excellent drift car. Fortunately it also has 10-inch wide wheels for more grip, and upgraded Wilwood brakes to stop it. It will go for auction at Barrett-Jackson's Las Vegas event, which runs Oct. 3-5. There is no estimated price for the car, which is understandable since nothing like it has crossed the block before. It will go to a new owner, whatever the price, as it is being listed as "no reserve." So if you want to win burnout contests or get loads of stares at next year's Woodward Dream Cruise, you could do a lot worse than picking up this tiny monster. Aftermarket Dodge Mazda Convertible Performance Hellcat