2006 Dodge Mega Cab 2500 Dually Long Bed Burgandy Color on 2040-cars
Douds, Iowa, United States
|
This is a 2006 Dodge 2500 dually mega cab custom made long bed truck. The truck has a custom made long bed on the truck. The truck has new front end wheel bearings, 5.9L 6 cylinder Diesel with an automatic 6-speed transmission. 4 door mega cab long bed. 4WD. Burgundy color exterior. Exterior consists of tinted windows in the back seats side step running boards interior has gray leather seating. There is a split bench seating arrangement in both the front and rear seats. Has power windows locks and side view mirrors. Also included: CD player auxiliary port, heated seats, heated mirrors and floor mats. The truck has a Fab Four brand heavy duty front end replacement bumper with a winch fair lead (winch not included). The tires were replaced in July 2012. They are 17 inch tires and have approximately 70% tred on them. There is a spot on the front end bumper that has a little rust spot, the tailgate has a chip of paint on the bottom side of the tailgate and a small crack on the passenger side before the sides of the dually begins. (which you will see from the pictures) This a great truck with a great amount of room in the cab and the truck bed. We are selling the truck because our plans of being on the road for our business has changed and we do not this big of a truck. The truck gets around 20-22 mpg. This truck is being sold as is and there will be no warranty of any kind with the truck so if you have questions, please let us know. There will need to be an immediate payment of $2000.00 via paypal within 48 hours of the end of auction unless other arrangements have been made. The remaining balance must be paid within 7 days of the end of auction when the truck is picked up or delivered by a certified bank check. Best of luck bidding and please ask questions before placing your bid.
|
Dodge Ram 2500 for Sale
2006 dodge ram 2500 diesel 4x4 slt mega cab 1 texas truck
2006 dodge ram 2500 diesel 4x4 big horn slt quad cab(US $30,885.00)
2011 dodge ram 2500 reg cab diesel 4x4 long bed 17k mi texas direct auto(US $32,780.00)
2005 dodge ram 2500 diesel
2012 dodge ram 2500 crew 5.7l hemi 6-passenger tow 25k! texas direct auto(US $24,980.00)
2005 dodge ram 2500 crew 5.9l diesel sunroof 45k miles texas direct auto(US $24,980.00)
Auto Services in Iowa
White`s Automotive ★★★★★
Smart Honda ★★★★★
Route 3 Tire ★★★★★
Precision Repair ★★★★★
Northwest CARSTAR Auto Body Repair Experts ★★★★★
Napa Auto Parts - Genuine Parts Company ★★★★★
Auto blog
Fiat Chrysler will invest up to $1.5 billion to build EVs in Windsor
Thu, Oct 15 2020Fiat Chrysler Automobiles will invest between $1.35 billion and $1.5 billion in its Windsor assembly plant in Canada to build electric vehicles as part of a tentative deal with Canadian autoworkers, Unifor National President Jerry Dias said on Thursday. The auto union said FCA would invest in a state-of-the-art vehicle platform that will enable the assembly of plug-in hybrid and battery electric vehicles, with at least one new model in 2025. The announcement comes less than a month after Unifor said Ford would invest $1.46 billion in its Oakville and Windsor plants. "Not only is Fiat-Chrysler maintaining the current portfolio but they will be investing three derivatives to enhance the current portfolio," Dias said. Unifor also said it expects to extend the life of the Chrysler 300, a rear-wheel-drive luxury car and introduce multiple derivatives of the Dodge Charger and Challenger. The union said as many as 2,000 jobs would be added in 2024 at the Windsor plant. Market forecasting firm LMC Automotive on Thursday said it would take until 2024 for U.S. vehicle sales to recover from the coronavirus downturn and get close to the 17 million vehicles sold in 2019. Ratification meetings for the FCA deal will happen over the weekend, and members will vote on whether to accept the agreement on Sunday. The union is expected to begin negotiations with General Motors's Canadian unit next week. Related Video: Green Hirings/Firings/Layoffs Plants/Manufacturing UAW/Unions Chrysler Dodge Fiat Jeep RAM Coupe Electric Sedan windsor
Dodge could enter Peugeot's Le Mans-bound 9x8 hypercar in IMSA races
Wed, Jul 21 2021Fiat-Chrysler Automobiles (FCA) and PSA Group merged under the Stellantis umbrella in early 2021 to achieve economies of scale, and this benefit could surprisingly extend to racing. Executives are debating whether to give Dodge its own version of Peugeot's recently-unveiled 9x8 hypercar to race in America, according to a recent report. "While we only heard [the new rules] confirmed a week ago, it has certainly led to some very open discussion, not only about whether Peugeot might add races in the United States, but also about whether the spine of this car might have opportunities with other brands in the Stellantis Group. There are no conclusions yet, but there are now open discussions," affirmed Jean-Marc Finot, the Senior Vice President of Stellantis, in an interview with Racer. His comments refer to an agreement signed in July 2021 by the Automobile Club de l'Ouest (ACO), the Federation Internationale de l'Automobile (FIA), and the International Motor Sports Association (IMSA). They chose to align their technical regulations to let manufacturers compete in different events on both sides of the pond without going through the resource-consuming process of developing a specific car for each series. As of writing, the Le Mans Hypercar (LMH) and Le Mans Daytona h (LMDh) categories fall under the newly-announced common set of rules. On the surface, this means Peugeot could enter its 9X8 (pictured) in the WeatherTech SportsCar Championship as soon as the 2023 season. While this is seemingly under consideration, Peugeot has little to gain from winning a major race in the United States. It hasn't sold cars here since 1991, and its long-mooted comeback was canned after PSA merged with FCA. Giving a variant of the 9X8 to Dodge is a more credible possibility, according to Racer. If not Dodge, then who else? Chrysler hasn't been linked to racing or performance for decades. Jeep is no stranger to performance vehicles, but IMSA would be pushing it. Ram is Ram, while Fiat, Alfa Romeo, and Maserati are rooted in Europe. The rest of the Stellantis brands (like Opel, Lancia, and Citroen) are not distributed in America. Nothing is official, and the publication stressed it's unclear whether Dodge will commit part- or full-time to the series (assuming the program receives the green light). Finot underlined the parallel car would use the 9X8's "spine," so don't expect to see a Peugeot hypercar with a Dodge emblem driving flat-out on the Sebring International Raceway.
Dodge idles Viper production again at Conner Avenue
Mon, 07 Jul 2014You've got to hand it to Dodge for having the gumption to put the original Viper into production in the first place. It was, after all, much more of an emotional decision than a practical one, and a move which saw the first production V10 engine placed in a road car - long before the advent of the Lamborghini Gallardo, Audi R8, Porsche Carrera GT or Lexus LFA, not to mention the other Ford, BMW and Volkswagen Group models that used such engines.
It's now been 22 years since the first Viper entered production and the Viper still rolls on several generations later, but we're sad to say that courageous decision has not always been met with overwhelming sales success. In fact parent Chrysler was forced to idle the Conner Avenue plant where the Viper is made back in April due to slow sales. And while production resumed again as planned on June 23, it apparently didn't do the trick.
As a result, Chrysler corporate communications chief Shawn Morgan revealed to Autoblog that the assembly line has been shut down again for another two weeks. The line was up and running for nearly two full work weeks from June 23 until the holiday weekend that started on Thursday, July 3. But instead of coming back online today as planned, it's been idled again for the weeks of July 7 and 14. That means it will be July 21, at the earliest, before the serpentine supercars start slithering down the assembly line at Conner Avenue again. Once it does, however, production is set to resume at the same pace it was before the shutdown.




















