2006 Dodge 2500 Mega-cab 5.9 Diesel 4x4 Lift Kit on 2040-cars

Auto blog

1968 Dodge Super Charger is a super Charger with a supercharger

Mopar's latest custom creation is sure to be in the running for coolest car at this year's SEMA show. It's a 1968 Dodge Charger, a car selected in part because this year marks the car's 50th anniversary, but taken to the extreme and renamed Super Charger. The headliner of the car's radical upgrades is the new "Hellephant" engine. It's a take on the original car's 426-cubic-inch Hemi V8. But this new engine, with the same displacement, is based on the current Hemi V8, and adds a supercharger. All told, it makes a whopping 1,000 horsepower and 950 pound-feet of torque on 93 octane pump gas. It will be available as a crate engine, too. The engine is far from the only impressive change to the car. All over the body are mild to wild tweaks. The wide, uninterrupted grille from the original is still here, but it's a one-piece example now. And instead of hiding the headlights behind doors that have to open for illumination, the lights simply shine through the grille, retaining a clean look even at night. The whole car sits 2.5 inches lower than stock, and it's now four inches wider thanks to the huge fender flares. They house 305-mm-wide tires up front, and 315-mm tires in the rear. Likely the most complicated change to the car is the lengthened wheelbase. There are two more inches between the wheels now, something Mopar did to reduce the front overhang. A close second in complexity are the taillights. They're the same shape as the originals, but now the round elements are actually exhaust outlets. The tips also happen to be the same as those on the Alfa Romeo Stelvio. There are other details that help bring together the exterior. The rain rails have been smoothed out on the roof, the vent windows removed, special 426 stickers have been added, and the fuel door now has a Hellephant badge with a blue background with lots of little Mopar Ms. The interior gets some attention, too. The rear seat has been removed, Dodge Demon style. It gets a custom roll bar designed to be as unobtrusive as possible, even getting the hoop around the seats to roughly line up with where the windows meet. Gauges come from the Mopar catalog, and the steering wheel and seats are from the dearly departed Dodge Viper. They're particularly relevant, as the six-speed manual transmission comes from the Viper, too. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Speedkore AWD twin-turbo Carbon Charger, best birthday gift ever

The backstory the Speedkore Performance AWD twin-turbo Carbon Charger teased a couple of weeks ago might be cooler than the car itself. Alan Palermo commissioned the carbon-fiber-bodied Dodge Demon Speedkore brought to SEMA last year, the one that supplanted the 6.2-liter Hellcat V8's supercharger with twin 6875 Precision Billet T4 turbos. That blasted the Demon's usual 840 horsepower up to 1,400 hp at the flywheel, 1,203 hp at the rear tires, good for an 8.77-second quarter-mile time at 162 miles per hour. Palermo's older brother remarked, "He liked the car but was more of a four-door guy," so Alan commissioned the AWD Carbon Charger as a 65th birthday gift for his sibling. Speedkore worked with Magnaflow on the sedan, starting with a 2019 Charger Pursuit as a base. The Wisconsin tuner secured a 2020 widebody Charger from Dodge, then 3D-scanned the bodywork to create the molds reproducing most of the sheetmetal in pre-preg carbon fiber. The hood, bumpers, fenders, rockers, rear spoiler, and rear diffuser are all fashioned from the lightweight stuff.  Beyond those Precision turbos laid in by Gearhead Fabrications, Speedkore installed a custom upper plenum, Boost Leash C02 progressive boost controller, custom Thitek heads, a Fore Innovations triple-pump fuel system feeding Injector Dynamics 1,700-cc injectors, and custom HP Tuners engine software calibration. Test results showed 1,525 hp at the crank when running 26 pounds of boost.  Hellraiser Performance engineered a new transmission working an FTI torque converter at one end and a carbon fiber driveshaft at the other. Instead of fortifying an off-the-shelf AWD system, Traction Products supplied a custom transfer case machined from billet shunting power to a set of Bogart Competition Series wheels wearing Mickey Thompson ET street rubber.  Speedkore fitted last year's Demon with a front-exit twin exhaust, with a single opening on each front fender, and left the rear bumper cutouts for the traditional exhaust empty. With the Carbon Charger sedan more of a family guy, Magnaflow sorted out a quad-pipe front-exit exhaust with two openings on each front fender, and ran a three-inch stainless steel Competition Series exhaust to the rear. The driver can switch between the two, the latter version providing a "moderate interior sound."  The folks at Speedkore say they'll keep tweaking the Carbon Charger after the show to get it right for the senior Palermo. We say, "Happy birthday, sir. Enjoy."

Hypermiling a Ram 1500 EcoDiesel to 38.1 mpg

You never quite know what Wayne Gerdes has up his sleeve. The man who coined the term hypermiling is always looking for adventurous ways to prove that anyone – even you... yes, you – can eke out more miles per gallon just by changing the way you drive. Saying that is easy. Proving it by going on outlandish cross-country drives is hard. But for Gerdes and his team of fuel economy fiends over at CleanMPG, hard is half the fun. Our latest adventure appeared, at first glance, to be nearly impossible. Which is why we always answer the phone when Gerdes calls. He likes to take journalists along on his drives, not only to try teach us how to hypermile but also to prove that we can be taught. The first time I 'helped' him and his team was when we got over 30 miles per gallon in a 2011 Ford F-150 XLT with the EcoBoost 3.5-liter V6. The EPA rated that truck with at just 16 mpg in the city and 22 on the highway. So, we'll count that trip as a success. Next up was a cross-country drive last fall in a trio of Audi TDI vehicles to prove that you don't need to drive extra slow to beat the EPA numbers. In fact, we made it from Los Angeles to New York City in just over 46 hours, cramped but not cranky. We had once again proven that how you drive is hugely important to your fuel usage. Our latest adventure appeared, at first glance, to be nearly impossible. The EPA says that the Ram 1500 EcoDiesel we would be driving gets just 22 combined mpg (19 city and 27 highway). Gerdes' idea was to drive it as far north from Houston, TX towards Detroit, MI as we could go on one tank. The day before we left, our itinerary got an extra stop. Instead of taking one of the official Shell Eco-marathon prototype vehicles to Detroit, it was decided to bring the winning diesel-powered prototype from the just-finished event to The Henry Ford Museum, where it had been arranged the car would be displayed. The winning car was built by a small team (just four students) from Sullivan High School in Sullivan, IN, who managed to beat a number of college teams with a score of 1,899.32 mpg. That target would be a bit out of reach for the Ram, but could we get 1,000 miles from the tank? Since the truck has a 26 gallon tank (officially, anyway), that would mean the EPA says we could only go 702 miles, assuming all highway driving. Could we make up 300 miles with careful driving? That spells both challenge and fun.