2003 Dodge Ram 2500 Base Crew Cab Pickup 4-door 5.7l on 2040-cars

Auto blog

Dodge revives Challenger T/A and Charger Daytona trims for 2017

Dodge is reviving the Challenger's T/A trim and the Charger's Daytona line for 2017. Introduced on iconic Woodward Avenue just days before the annual Woodward Dream Cruise kicks off, the new variants promise more performance hardware and sportier aesthetics. We'll start with the two-door. The Challenger T/A, available with either the R/T trim's 5.7-liter V8 or the fire-breathing 6.4-liter Hemi V8, is inspired by the Challenger T/As of old. That means a less restrictive, 2.75-inch active exhaust system and a conical Mopar air filter. But there's no clear bump in output – Dodge still lists the base 5.7-liter at 375 horsepower and the 6.4-liter model at 485 hp. But hey, they're going to look cooler. Unlike the Challenger Hellcat, which should have it as standard, Dodge is including a Satin Black hood on every Challenger T/A. In fact, Satin Black is a recurring theme on this Challenger's front fascia, roof, rear decklid, and T/A bodyside stripes. And yes, the 20-inch Mopar wheels are black, too – they're also an inch wider than normal. Dodge is offering the T/A in three different trims. The base T/A has everything we described above, while the T/A Plus adds some comfort features like heated and vented Nappa leather seats, an 8.4-inch UConnect system with Apple CarPlay/Android Auto, a six-speaker stereo, and a shortcut button for the Dodge Performance Pages. The T/A 392, meanwhile, adds the 6.4-liter V8, even wider wheels, and Brembo six-pot calipers. If you prefer smoking tires with four doors, there's the new Charger Daytona. No, there's not an enormous wing on the back. But Dodge added the same kind of engine/exhaust upgrades found on the T/A while upping the top speed from 135 to 150 miles per hour. Satin Black features prominently again, with hood and rear fender graphics. The roof is also black. Unlike the Challenger, Dodge is only offering two different versions of the Daytona – the 5.7-liter base model and the 6.4-liter version, called the Daytona 392. Prices for the Challenger T/A start at $38,485, including a $1,095-destination charge, while the T/A Plus adds $2,750. Adding the 392 means shelling out $45,090. For the Daytona, you'll need a check for $40,985 for the 5.7-liter or $46,090 for the 6.4-liter. Orders for the Charger Daytona open in September, while the T/A is a month later. Related Video:

We're pretty sure the Challenger SRT Demon won't have 1,121 horsepower, but what if?

Dodge's slow rollout of the upcoming Demon continues, and with it comes endless speculation about what it all means. Every video, every image, and every press release contains some clue that points towards the Demon's final specs. We don't think any of it is random or arbitrary. This week cryptic image, a small plate with a name and two numbers, shows us a little more than last week's license plate. Unfortunately, Dodge will neither confirm or deny anything, meaning we have no way of knowing which rabbit hole to go down. Don't expect to see official horsepower, a quarter-mile time, or an MSRP until the New York Auto Show. The plate is attached to the crate of goodies that comes along with every Dodge Demon. This particular one is labeled with three things: Tom Coddington, serial number 0757, and VIN 001121. The name is simple enough. According to Hot Rod, Coddington was one of the original Ramchargers, a group of engineers in the early 1960s that helped Dodge get involved in drag racing. He was a fuel system specialist, motor consultant, and a rotating garage manager. All of that could be clues. While a name is easy enough to Google, the two numbers can't be broken down so easily. The crazier theory is that the car makes 1,121 horsepower and will do the quarter-mile in 7.57 seconds. Frankly, those numbers are about as likely as the Demon actually being powered by a Rolls-Royce turbofan engine from a Boeing 757 or packing a carburetor with 1,121 CFM. The Demon is going to be street legal, and the costs associated with making a 1,121-hp car meet emissions standards alone are assuredly astronomical. As our friends from Road & Track pointed out, the more likely theory is that 757 is actually the horsepower rating. This seems totally plausible, but it means we still don't know what 1,121 means. Surely it's not a drag strip time, as the standard Hellcat will do 1/4 mile in 11.2 seconds. Like before, if you have any ideas, post them in the comments. Until April, we'll keep trying to solve Dodge's demonic puzzle. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. News Source: Road & Track, Hot RodImage Credit: FCA New York Auto Show Dodge Coupe Performance dodge demon dodge hellcat

Dodge Charger SRT Hellcat in the works

In Autoblog's recent First Drive of the 2015 Challenger SRT with the 707-horsepower Hellcat V8 we found its engine to be as brutally powerful as the numbers would suggest, even if it wasn't the best handler. However, the muscle-car-styling just isn't right for some buyers that need four doors and proper rear seats to haul around the family. It appears that Dodge has their backs, though, because the Hellcat is very likely on its way into the Charger in the near future. Imagine the looks on your passengers' faces when you stomp down on the throttle.
According to Road and Track, when Dodge submitted the Hellcat for engine power certification to the Society of Automotive Engineers, the company included the Charger on the paperwork. That showed that the automaker wanted the engine checked out for the sedan, too. R&T reckons the 707-hp Charger would hit the road about a year from now, clearing the Challenger for a year of exclusivity with the powerplant.
When the Charger SRT Hellcat does hit the road, it may carry a very special accolade. Assuming nothing beats it in the meantime, it might be the world's highest horsepower production sedan. Think on that for a second. Even a Mercedes S65 AMG only has 621 horsepower, though a good bit more torque at 738 pound-feet to the Dodge's 650 lb-ft. So while the beastly engine is getting put into other models, where else would you like to see it? The Ram? Grand Cherokee? Let us know in Comments.