Slt Big Horn 5.7lhemi Automatic Tonneau Cover Tow Package Crew Cab Clean 4x2 on 2040-cars

Auto blog

Dodge Viper to out-Hell the Hellcat with supercharged V10?

The Viper wouldn't be the Viper if it wasn't the most powerful model under the Chrysler umbrella. But with the arrival of the Hellcat engine in the Dodge Charger and Challenger, the Viper has fallen behind in the bragging rights department: where the new supercharged V8 produces 707 horsepower and 650 pound-feet of torque, the naturally aspirated V10 offers "only" 640 hp and 600 lb-ft - gargantuan output figures by almost any other standard, but crucially behind on the SRT power scale. Conner Avenue is going to have to do something about that.
Although the Hellcat's engine reportedly won't fit under the Viper's hood, SRT is now rumored to have another trick up its sleeve: supercharge the existing V10. According to the Pentastar performance enthusiasts at allpar.com, Chrysler has already taken delivery of the first such prototype engines so that it can begin the process of fitting it into an upgraded Viper.
The spooled ten-pot is tipped to produce around 800 hp and 650 lb-ft of torque. More than that and the Viper's drivetrain, chassis and bodywork would have to be substantially reworked. Though beefier transmissions are available, fitting them would reportedly set off a domino-game of changes required to handle the added torque. Which may be something Chrysler would be prepared to do for the next-generation model, but in the meantime, 800 hp could prove enough to put the Viper back atop the Mopar performance ladder where it belongs, and give it an edge against the new Corvette Z06 to rekindle sales.

Dodge Durango Shaker concept: A 392 V8 in front of six Viper seats

When done right, a parts-bin special can be a beautiful thing. This Dodge Durango Shaker concept for the 2016 SEMA show is one such vehicle, and it's easily our favorite Mopar debuting in Vegas. The key, of course, is pulling from the right bins. Take a tour and you'll see Charger, Challenger, and Viper pieces grafted onto this slick crossover. The featured special part is the big, 6.4-liter 392 Hemi V8 that's been dropped under the hood; it's sourced from the SRT Challenger and Charger where it makes 485 horsepower and 475 pound-feet of torque. With that in place, the fabricators cut a big hole in that hood for the Challenger's awesome optional shaker scoop. It wasn't an easy installation; it required a custom spacer for the intake to make sure everything lined up with the hole properly. View 17 Photos Apparently there were some Viper seats lying around, so six of them were stuck into this Durango. Makes sense. It does lose a bit of people-carrying capability as a result, since only two seats fit in each row, and the seats don't fold for extra cargo room. A Dodge spokesperson attested to the fact that all three rows are usable, if not totally comfortable. But then stock third-row seats aren't always that comfortable anyway. Seriously, though, Viper seats. We don't care how comfortable or usable the result is. Although you might not give it a second thought, even the fuel filler needed some special attention. This piece was also lifted from a Dodge Challenger, and it was taken along with the surrounding sheet metal. Because of the different orientation of the filler cover on the Challenger, the builders decided the easiest way to get it to fit was to chop the fuel filler section out and weld it onto the Durango. The designers also put a little blue Stig on the cover. And those are just the cool parts that were hard to install. This Durango features plenty of other slick details, like the custom bumpers, fender flares, and side skirts. Everything is painted B5 Blue with matte black and carbon accents all around. Up front, the bumper hides a pair of fog lights stolen from a Challenger Hellcat – and yes, they're the ones with intakes in the middle. The grille is also a custom piece, losing the standard crosshair design for better airflow. The fender flares cover up some seriously wide, 305-section tires at all four corners, which are hauled down by Hellcat brakes. The rear bumper bumper contains a stylish center-exit exhaust with dual tips.

Junkyard Gem: 1986 Dodge Ram 50

After years of selling the Isuzu Faster with Chevrolet LUV badges here, GM replaced it with the S-10 in 1982. Ford sold Mazda Proceeds with Courier badges for even more years, but ditched the Courier once the Ranger became available as a 1983 model. Chrysler was able to put truck beds on Omnirizons at that time, but didn't have the deep pockets to develop its own rear-wheel-drive small pickup; for this reason, Dodge-badged Mitsubishi Forte pickups continued to be available in the United States all the way through the 1994 model year. Here's one of those trucks, found in a Colorado car graveyard. The first Chrysler-imported Mitsubishi Fortes showed up in the United States as 1979 models. The Dodge-badged version was known as the D-50, while Plymouth dealers got theirs with Arrow badges. The Dodge D-50 became the Ram 50 for the 1981 model year, while the final Plymouth Arrow trucks were sold as 1982 models. Just to make things more interesting, Mitsubishi started selling its own vehicles in the United States beginning with the 1983 model year. That meant that the Ram 50 had to compete for sales with a near-identical twin sporting Mitsubishi badges. Things in the Chrysler-Mitsubishi universe got even more exciting a bit later, when there were four marques selling essentially the same car here simultaneously: the Mitsubishi Mirage, Plymouth Colt, Dodge Colt and Eagle Summit. All of the Dodge D-50s and Ram 50s came with Mitsubishi power under their hoods. This one has a 2.0-liter SOHC straight-four rated at 88 horsepower and 108 pound-feet. For a while, a 2.3-liter Mitsubishi diesel was available in the Ram 50. It had been discontinued by 1986, however. This one has the base five-speed manual transmission. It appears that this truck was being used for long-term storage of many, many boxes of random household stuff when it was banished to this place. Much of the stuff was scattered on the ground nearby. Perhaps it was parked at a rent-a-storage facility and got evicted for lack of rent payments. Much of the contents consisted of stacks of newspapers and magazines from the 1960s and 1970s. Here's an Art Buchwald column about then-Vice President Spiro Agnew from February 23, 1971. Here's a Beetle Bailey strip from the same year. There's plenty of history in the junkyard, if you know where to look. There must have been a half-ton of paper in this truck when it arrived here. Sadly, some family's photo albums were here as well.