No Reserve 1999 Dodge Ram 1500 Conversion Van Tiara Mark Iii Edition 3-door 5.2l on 2040-cars

Auto blog

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

Junkyard Gem: 1991 Dodge Stealth R/T

Chrysler's relationship with Mitsubishi goes back to the early 1970s, when the first Mitsubishi Colt Galants arrived from Japan with Dodge Colt badging. Plenty of Mitsubishi-built Arrows and Ram 50s and Challengers followed, and the joint Chrysler-Mitsubishi plant in Illinois began building cars in 1988. By the 1990s, you could find Mitsubishi DNA throughout the American Chrysler family, and the Mitsubishi GTO was brought over to become the Dodge Stealth starting in 1991. Here's one of those first-year Stealths, now residing in a Colorado self-service boneyard. Four grades of Stealth were available here in 1991, with the R/T Turbo AWD at the very pinnacle. This car, a regular R/T, is one step down from that model but still a pretty quick machine for its time. MSRP was $25,155, or about $55,370 in 2022 dollars. The R/T got this naturally-aspirated DOHC 6G72 engine, displacing 3.0 liters and making 222 horsepower. If you got the turbocharged version in the R/T Turbo AWD (or the Mitsubishi 3000GT VR-4), power went up to 300 horses. The 3000GT (as the GTO was known here) was mechanically identical to this car but had slightly different styling. The GTO/3000GT/Stealth replaced the Mitsubishi Starion and its Chrysler/Dodge Conquest siblings, which were sold here from the 1983 through 1989 model years. The Starion was a rear-wheel-drive machine that competed for sales against the Toyota Supra and Nissan Z, while the Mitsubishi GTO was available with either front- or all-wheel-drive. As illustrated by this photo of the rear suspension, this car is a front-wheel-drive version. Americans loved automatic transmissions 30 years ago, nearly as much as we love them today, but this car has a proper five-on-the-floor manual. If you wanted the optional four-speed automatic, it cost 813 bucks ($1,790 today). The Stealth R/T AWD had a mandatory five-speed manual transmission. This car has been hit hard by junkyard shoppers and the ravages of time, but it was fairly luxurious when new. Air conditioning was standard equipment on the R/T, though not on the lesser Stealths. This car came close to 150,000 total miles, but fell a bit short of that milestone. The final year for the Dodge Stealth was 1996, though the Mitsubishi 3000GT remained available here through 1999. The Mitsubishi GTO held on through 2000 in its homeland. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Outhandles the Lotus Esprit!

Dodge idles Viper production again at Conner Avenue

You've got to hand it to Dodge for having the gumption to put the original Viper into production in the first place. It was, after all, much more of an emotional decision than a practical one, and a move which saw the first production V10 engine placed in a road car - long before the advent of the Lamborghini Gallardo, Audi R8, Porsche Carrera GT or Lexus LFA, not to mention the other Ford, BMW and Volkswagen Group models that used such engines.
It's now been 22 years since the first Viper entered production and the Viper still rolls on several generations later, but we're sad to say that courageous decision has not always been met with overwhelming sales success. In fact parent Chrysler was forced to idle the Conner Avenue plant where the Viper is made back in April due to slow sales. And while production resumed again as planned on June 23, it apparently didn't do the trick.
As a result, Chrysler corporate communications chief Shawn Morgan revealed to Autoblog that the assembly line has been shut down again for another two weeks. The line was up and running for nearly two full work weeks from June 23 until the holiday weekend that started on Thursday, July 3. But instead of coming back online today as planned, it's been idled again for the weeks of July 7 and 14. That means it will be July 21, at the earliest, before the serpentine supercars start slithering down the assembly line at Conner Avenue again. Once it does, however, production is set to resume at the same pace it was before the shutdown.