Dodge 1500 Extended Cab, Long Bed 4x4 With 7.5' Curtis Plow on 2040-cars

Auto blog

Demon's NHRA competition ban: Good talking point, bad feature

One of the biggest headlines for the Dodge Challenger Demon is that, in stock form, it's so fast that the NHRA won't allow it to compete in the organization's events. It's the ultimate humble brag, "I can't drag race my car because it's so fast it was banned by the sanctioning body." Certainly Tim Kuniskis, head of FCA brands in North America, was excited. He told the press that he hugged the guy that brought him the letter banning the Demon from competition. Unfortunately, the reality is that not being NHRA-legal is kind of silly, and frustrating for owners who would want to actually race. Before we go too much farther, we should explain exactly why the Demon is illegal for NHRA competition. The car is capable of a sub-10-second quarter-mile time both on racing fuel and 91-octane pump gas. Cars that fast are required by the NHRA to have a full, certified roll cage, and the Demon doesn't. Now there are certainly ways to get around this. The most obvious would be for a Demon owner to have a company install a roll cage. Using less grippy tires than the barely street-legal Nitto cheater slicks would probably help bring that time down, too. There's also the option of putting the car into Eco mode, and, yes, the Demon has one. In Eco mode, the Demon makes just 500 horsepower, and trips the lights at the quarter-mile in 11.59 seconds, which will avoid the roll-cage requirement. However, none of these options are ideal. For one thing, if you bought an 840-horsepower car, you're not going to want to limit it when you get to a closed course such as a drag strip. Similarly, you're not going to want to ditch your super-sticky tires at the strip, especially when they're standard equipment. Finally, having to go aftermarket for a roll cage is an inconvenience at minimum, and it seems like a strange oversight considering the rest of the car. This is a car from the factory that comes with drag radials, no passenger seats, a racing fuel tune, air conditioned intercooler, and even skinny front wheels for drag racing. Its purpose is clear, but for some reason, Dodge stopped short of giving it a roll cage that would allow it to compete. Perhaps adding a roll cage would've made it difficult to pass safety regulations, and we would be more disappointed if the car wasn't allowed on the street. Even so, it seems like an odd stopping point.

Dodge revives Challenger T/A and Charger Daytona trims for 2017

Dodge is reviving the Challenger's T/A trim and the Charger's Daytona line for 2017. Introduced on iconic Woodward Avenue just days before the annual Woodward Dream Cruise kicks off, the new variants promise more performance hardware and sportier aesthetics. We'll start with the two-door. The Challenger T/A, available with either the R/T trim's 5.7-liter V8 or the fire-breathing 6.4-liter Hemi V8, is inspired by the Challenger T/As of old. That means a less restrictive, 2.75-inch active exhaust system and a conical Mopar air filter. But there's no clear bump in output – Dodge still lists the base 5.7-liter at 375 horsepower and the 6.4-liter model at 485 hp. But hey, they're going to look cooler. Unlike the Challenger Hellcat, which should have it as standard, Dodge is including a Satin Black hood on every Challenger T/A. In fact, Satin Black is a recurring theme on this Challenger's front fascia, roof, rear decklid, and T/A bodyside stripes. And yes, the 20-inch Mopar wheels are black, too – they're also an inch wider than normal. Dodge is offering the T/A in three different trims. The base T/A has everything we described above, while the T/A Plus adds some comfort features like heated and vented Nappa leather seats, an 8.4-inch UConnect system with Apple CarPlay/Android Auto, a six-speaker stereo, and a shortcut button for the Dodge Performance Pages. The T/A 392, meanwhile, adds the 6.4-liter V8, even wider wheels, and Brembo six-pot calipers. If you prefer smoking tires with four doors, there's the new Charger Daytona. No, there's not an enormous wing on the back. But Dodge added the same kind of engine/exhaust upgrades found on the T/A while upping the top speed from 135 to 150 miles per hour. Satin Black features prominently again, with hood and rear fender graphics. The roof is also black. Unlike the Challenger, Dodge is only offering two different versions of the Daytona – the 5.7-liter base model and the 6.4-liter version, called the Daytona 392. Prices for the Challenger T/A start at $38,485, including a $1,095-destination charge, while the T/A Plus adds $2,750. Adding the 392 means shelling out $45,090. For the Daytona, you'll need a check for $40,985 for the 5.7-liter or $46,090 for the 6.4-liter. Orders for the Charger Daytona open in September, while the T/A is a month later. Related Video:

GTC deliveries take Rauh collection up to 79 Vipers [w/video]

How many Vipers is enough? One of the ten-cylinder supercars might be too much machine for most drivers to handle, but not for Wayne and D'Ann Rauh. The Texas couple already own 77 of Dodge's flagship model. And now they've taken delivery of two more. At the Conner Avenue Assembly Plant in Detroit on Friday, the Rauhs received the keys to a pair of Dodge Viper GTCs, customized through the automaker's "1 of 1" customization program. The program allows owners to spec their Viper just the way they want it, with 50 million unique combinations. For their 78th and 79th additions, the Rauhs ordered one decked out in brown with black stripes for Wayne, the other in purple with white for D'Ann, to whom the majority of the collection belongs. Of course, both come equipped with an 8.4-liter V10 driving 645 horsepower and 600 pound-feet of torque to the rear wheels through a six-speed manual transmission. The couple will add the pair to their collection in Arp, TX, a town on the outskirts of Tyler, located between Dallas and Shreveport. The Rauh's garage already includes the last of the previous-generation Vipers decked out in two-tone gold finish. eGarage profiled the couple two years ago when their collection numbered "only" 65, and we have no doubt that number will only continue to grow as long as Dodge keeps building the legendary super-snake. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Texas Dodge Viper Enthusiasts Receive Keys to Two New Customized '1 of 1' Dodge Viper GTC Models, Now Owners of 79 Vipers Total July 24, 2015 , Detroit - Dodge Viper owners Wayne and D'Ann Rauh elevate Viper Nation enthusiasm to a whole new level. On Friday, July 24, the couple visited the Conner Avenue Assembly Plant in Detroit to receive keys to not one, but two new customized "1 of 1" Dodge Viper GTC models, making them proud owners of a total of 79 Dodge Vipers. Through the new Viper "1 of 1" customization program, owners can create their very own one-of-a-kind Snake. No two customers can order the same configuration, including color, in the same model year. With the introduction of matte-finish exterior paint, the 2016 Viper is now offered in more than 50 million unique build configurations, made up from the more than 16,000 unique paint color options and more than 48,000 unique stripe combinations.