5.7 Liter Hemi Mega Cab 4x4 Automatic With A Small Lift Alloys Bedliner on 2040-cars

Auto blog

One Lap of America, with three times the madness

Instead of celebrating last weekend face down in a sombrero full of tequila-spiked OJ and a few lime wedges, 71 racing teams with one set of tires each and no support crews began Cinco De Mayo — and this year's 35th running of the One Lap of America — by hitting the wet skid pad at Tire Rack's headquarters in South Bend, Ind. There were Porsches, Vettes, Camaros and BMWs galore. There was a Miata, a vintage NSX, a Honda S2000 and even an old VW Rabbit. There were GTIs, the odd Evo and, oh yeah, six Toyotas, a couple of Vipers and a couple of GTRs. When the skidding stopped, a 2011 BMW 1M emerged triumphant and led the pack out into the heartland, where it will spend 5,000 miles this week hitting road courses, dragstrips and time trials at tracks as far west as Denver, as south as Fort Worth and then New Orleans. From there, it will barrel north through Mississippi, Alabama, Nashville, Kentucky and back home again to Tire Rack in Indiana. Twenty events, eight venues, with a three-hour window for each event. It's a nonstop, no-sleep, one-week road trip comprising 150-ish friends and brothers, partiers and pro racing drivers, spouses and other family-member combo packs. Some will never speak to each other again, some might end up divorced, some might get married. All of them are nuts. I know this because I made three laps. Three laps I will never forget.LAP ONE: 1984 Vehicle: 1984 Dodge Van Team #0: Jean Lindamood (Jennings), Walker Evans, Parnelli Jones I was present for the inaugural 1984 One Lap of America because I worked at Car and Driver back then and so did Brock Yates. He was the guy who came up with the clandestine, illegal, unsanctioned Cannonball Baker Sea-to-Shining-Sea Memorial Trophy Dash from Connecticut to Redondo Beach, Calif. It ran five times in the 1970s, with Yates joining Dan Gurney in a Ferrari Daytona for the second run. They won, Gurney insisting that "at no time did we exceed 175 miles per hour." One Lap was born of Cannonball nostalgia (read: Brock was bored), and I was beyond game for it. After securing a van from Dodge and two giant decals for the van sides, along with $5,000 in sponsorship from local Detroit Stroh's Brewery, I coaxed my friend, nine-time Baja 1000 winner Walker Evans, into running One Lap by suggesting he didn't have a hair on his ass if he refused. Then I suggested that if he didn't get his best friend and longtime road trip buddy, Parnelli Jones, to go with us, I would actually have to drive the van, too.

2013-14 Dodge Viper recalled over faulty door handles

The 2013-14 Dodge Viper is getting a voluntary recall affecting 1,762 cars worldwide to replace their door-handle assemblies. Of the affected vehicles, FCA US reports there are 1,451 in the US, 160 in Canada, 17 in Mexico and 59 of them outside of NAFTA. After receiving three reports of doors either not closing or opening while driving a low speeds, FCA US engineers found a new sealant from a supplier didn't provide sufficient moisture protection to the electronic switches for the door latches. If the parts get wet, this can potentially cause a short circuit. The automaker is quite clear that are no reports of accidents of injuries from this problem. As always, the recall repairs will be done at no cost to owners, and FCA US will be getting in touch with customers soon about the problem. Related Video: Statement: Door-handle Assemblies April 9, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 1,762 cars globally to replace their door-handle assemblies. FCA US launched an investigation after the Company received three warranty claims linked to doors that failed to close or opened inadvertently while vehicles were moving at low speed. The Company is unaware of any related injuries or accidents. Engineers determined a sealant, newly adopted by a supplier, provided inconsistent moisture protection to the electronic switches that control the door latches. Switches exposed to moisture may short-circuit. Affected are approximately 1,451 model-year 2013-14 Dodge Viper SRT cars in the U.S.; 160 in Canada; 17 in Mexico and 59 outside the NAFTA region. Affected customers will be notified and advised when they may schedule service, which will be performed at no cost. Customers with questions may call the FCA US Customer Information Center at 1-800-853-1403.

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric