2007 Dodge Ram 4x4 Slt on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

2019 Dodge Challenger SRT Hellcat Redeye priced $14,000 below Demon

Steve Beahm, head of Passenger Car Brands at Dodge, SRT, Chrysler, and Fiat, told Motor Trend that the 2019 Dodge Challenger SRT Hellcat Redeye is "a Hellcat that's been possessed by a Demon." Turns out the Hellcat Redeye was also possessed by The Ghost of Great Deals. Dodge just released pricing for the Challenger line, the crimson-eyed terror at the top starting at $69,650, which is $13,645 less dear than the $83,295 MSRP for the 2018 Challenger SRT Demon. The asterisk: the Redeye needs the same $1,345 destination charge and $1,700 gas guzzler tax as the 2018 Demon, so the difference still holds once you get the Redeye off the dealer lot. The final tally: $72,995. Torque News acquired a copy of the Challenger dealer order guide, and options on the Hellcat Redeye will run you a little more than the bucket of $1 options on the Demon. Among the list, the summer performance tires add $695, the optional 3.09 rear axle adds $1,095, a painted black hood costs $1,995, and the Widebody package adds $6,000 for it's extra 3.5 inches. According to TN, you can run a standard Hellcat Redeye up to almost $90,000, and push a widebody to $95,000. The standard Challenger SRT Hellcat gets touched by the bargain bogeyman, too: the price goes down by $5,645 for 2019 to $58,650, even though it's been uprated by ten horsepower to 717 hp, and by six pound-feet to 656 lb-ft. Out-the-door price after a $1,700 gas guzzler tax and $1,345 destination fee is $61,695. Before including destination, there's a long way down to the next model, the 485-horsepower Challenger R/T Scat Pack at $38,995. Buyers who choose the six-speed manual for this trim will pay a $1,000 gas guzzler tax. The V6-powered, 305-hp Challenger GT in two-wheel drive starts at $29,995. Sending power to all four of the GT's wheels needs $32,995 before destination. The base model, two-wheel drive SXT gets the Challenger doors open at $27,295, the all-wheel drive model costing $30,295. Related Video:

The Dodge Demon's massive drag tires are just barely street legal

Despite the gaffe that was the Vin Dieselgate leak (no, not that one), Dodge and SRT are soldiering on with the twelve-part Dodge Demon rollout in the lead up to the car's reveal at the New York Auto Show. The Vin Diesel video showed what is almost assuredly the car's front, but now we get an official view of the Demon's rear in this week's video, "Wide Body." Along with the new view, Dodge shows off a cryptic license plate (Michigan #2576@35) and details on the Demon's tantalizing wheel and tire combo. That wheel and tire combo, meant to fill out the Demon's new wide wheel arches, is frankly impressive. Lightweight 18- by 11-inch wheels are wrapped in special Demon branded Nitto NT05R tires measuring an astounding 315/40R18 at all four corners. Not only does that trump the old Camaro Z/28's 305 section tires, it makes the Demon the first production car to come equipped from the factory with drag radials, claims Dodge. Presumably, the goal with the Demon is to provide enough power and grip to rotate the Earth underneath the car rather than propelling the car itself down a dragstrip. Beyond that, few other details were revealed. Dodge provided some vague information about how the "wide-body is laser clearanced, and the entire chassis is e-coated for durability before final assembly," but doesn't actually explain what that really means. We do know now that the flared fenders add 3.5 inches to the Demon's overall width. Overall, the car looks mean and purposeful, especially wrapped in just barely street-legal rubber. Follow along at www.ifyouknowyouknow.com and see if you can find and decipher all the hints. Related Video: Design/Style New York Auto Show Dodge Coupe Performance tires dodge demon dodge hellcat