2007 Dodge Ram 1500 Quad Cab Big Horn Edition 4x4 on 2040-cars
Cadiz, Kentucky, United States
Up for sale is a 2007 Dodge 1500 Quad Cab 4x4 Big Horn Edition. I purchased this vehicle new in 2007. It has been very well taken care of as can be seen in the photos. This vehicle has never been in an accident or had any damage of any kind. I personally have performed the maintainence on this vehicle. The oil and filter have been changed every 3000 miles without exception. I use only original equipment Mopar oil filters and Mobil 1 full synthetic oil. The plugs have been changed per manufacturers recommendations(every 35000 miles) with original equipment parts. At 100,000 miles I changed the transmission filters (both of them) with factory dodge filters and replaced the fluid with Mopar trans fluid. At that time I also replaced the brake pads (all 4 wheels) with Dodge original equipment pads, not aftermarket. I also performed a thorough inspection and found no leaks or anything at all wrong with this truck. The air filter has been change per manufacturer recommended intervals with oem replacement parts. This truck is all original with all maintainence performed with original Dodge parts. The truck has never had any problems at all, it has been perfect. I honestly have never even had to change a light bulb. The interior of the truck is clean and shows almost no wear. After about a year, the front drivers seat was begining to show where I was sliding in and out of it, so I bought the seat covers you see in the picture and they have been on ever since. The seats under them are still in excellant condition. The truck has NEVER been smoked in. The tires however will need to be change before too long they are almost at the wear line. The truck has a factory accessory bed rug as can be seen in the pictures. This was installed at the dealership when I purchased the truck and has never been removed. The inside of the bed does not have a scratch. The truck runs, drives, and rides like new. The truck is primarily used to pull my bass boat and on family outings, it has not been used as a work truck. If you have any questions or need additional information, you can call or text me @ 270-498-0421. This is a clean, well maintained, well taken care of truck in excellent condition. Buy with confidence.
|
Dodge Ram 1500 for Sale
Clean interior flex fuel uconnect power options bed liner satellite xm cruise(US $17,972.00)
Low miles bed liner two tone clean lone star cruise satellite sirius pwr opts(US $16,893.00)
2002 dodge ram 1500 slt crew cab pickup 4-door 4.7l(US $12,500.00)
01dodge ram 1500 4x4 4wd regular cab bed liner v8 automatic(US $8,650.00)
10 dodge ram 1500 quad cab 4x4-warranty-one owner florida truck-clean auto check(US $17,900.00)
2010 dodge ram 1500 quad cab big horn 2wd loaded(US $17,800.00)
Auto Services in Kentucky
Withers Imports Reprs ★★★★★
Supreme Oil Co ★★★★★
Steven`s Transmission Repair ★★★★★
Sam Swope Cadillac ★★★★★
Robke Ford/Parts Dept ★★★★★
Performance Plus ★★★★★
Auto blog
Stellantis and LG announce Canadian EV battery joint venture
Wed, Mar 23 2022SEOUL — South Korean battery giant LG Energy Solution (LGES) said on Wednesday it plans to invest $1.5 billion to set up a joint venture with Stellantis in Canada. LGES owns 51% of the joint venture, tentatively named "LGES-STLA JV" and Stellantis owns 49%, LGES said in a regulatory filing. In October, LGES and Stellantis NV struck an electric vehicle (EV) battery production joint venture, targeting to start production by the first quarter of 2024 and aiming to have an annual production capacity of 40 gigawatt hours of batteries. In a separate regulatory filing, LGES said it plans to acquire a stake worth $542 million in ES America to respond to demand from EV startups in the United States. LGES is considering building a factory in Arizona to meet demand in the United States, two people familiar with the matter told Reuters, adding that the plant is expected to primarily produce cylindrical battery cells. LGES has its own factory in Michigan and two battery joint ventures with General Motors in Ohio and Tennessee. "We are considering a new production site, but nothing has been decided yet," said a spokesperson at LGES. LGES, which counts Tesla, GM and Volkswagen among its customers, currently has battery production sites in the United States, China, Poland, Indonesia and South Korea. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Green Plants/Manufacturing Chrysler Dodge Fiat Jeep RAM Electric
Dodge adds fire-breathing Durango SRT for 2018
Tue, Feb 7 2017The playbook for Dodge right now is pretty simple. Wring as much power out of as many things as humanly possible. Now comes the 2018 Dodge Durango SRT. Packing 475 horsepower and 470 pound-feet of torque, this seven-seat school bus will scoot to 60 miles per hour in just 4.4 seconds. Since the latest Durango launched for 2014, Dodge has unabashedly called it a three-row Charger. This beefy SUV makes that aggressive claim even more legit. "It does all the things we want a performance car to do," says Mark Trostle, head of performance, passenger, and utility vehicle exterior design. "It really is our three-row Charger." The 6.4-liter (392 cubic inches) Hemi V8 is considerably stronger than the already-potent 5.7-liter Hemi V8, which is rated at 360 hp and 390 lb-ft in the most powerful Durango available now. The SRT powertrain includes the TorqueFlight eight-speed automatic transmission used in the lesser Durango models (and many other FCA US vehicles), though it's calibrated specifically to the sportier demeanor of the SRT model. A similarly retuned full-time all-wheel-drive system rounds out the powertrain. Despite the fact this is a hot-rod SUV, it can still tow 8,600 pounds with a trailer, 1,200 pounds more than the most capable 2017 Durango (the rear-wheel 5.7-liter variant). View 9 Photos The Durango SRT is an obvious move for Dodge. The Jeep Grand Cherokee, which is built on the same platform in the same factory in Detroit, already has an SRT model. With rumors of a Hellcat-powered Grand Cherokee swirling and another Demonic Challenger on the way, the Durango was overdue for an engine upgrade. "When we launched the Durango in 2014, this is the one we really wanted," says Tim Kuniskis, head of FCA US' passenger car brands. There's no doubt this is an enthusiast-oriented SUV. Dodge even went to the trouble of certifying the Durango SRT's 12.9-second quarter-mile time with the NHRA and tested it a Virginia International Raceway. Buy a Durango SRT, and you get a full day at the Bob Bondurant School of High Performance Driving. When's the last time anyone did all of that with a three-row ute? It certainly looks the part. The hood bulges with new air-ducts to help keep the big Hemi chilled appropriately. There's a new front fascia with more air vents and LED fog lamps. Plus, the grille takes on a menacing new glare with a mesh pattern, and the body gets wider wheel flares. Click through the gallery, it really does look like a Charger from some angles.
Dodge Demon makes so much torque, it needs stronger driveline parts
Thu, Mar 2 2017Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat