2005 Dodge Ram Reg Cab Hemi 4x4 Automatic Bedliner 57k Texas Direct Auto on 2040-cars

Auto blog

Dodge celebrates centennial with Charger and Challenger 100th Anniversary Editions

In 1914, the Dodge brothers went from being a parts supplier to a full-scale automaker, and to celebrate the centennial of this milestone, Dodge will offer special editions of the 2014 Charger and Challenger early next year. Both cars will be sold in limited numbers (although no specific number was given), and these cars will stand out thanks to unique touches like 20-inch wheels, 100th anniversary edition logos and the exclusive High Octane Red Pearl Coat paint job (shown above).
The 100th Anniversary Edition package, which runs $2,200 on the 2014 Charger and $2,500 on the 2014 Challenger, comes with red or black leather seats with a cloud print (for a denim-like look) and metal badges on the seatbacks that read "Dodge Est. 1914," while similar logos are also found on the wheel center caps and front fenders. The instrument gauges are unique to each car, with the Charger getting black gauges and the Challenger getting white gauges, and to enunciate the 100-year anniversary, both cars have red numerals on the speedometer for the 100-mile-per-hour mark.
Finishing off the 100th Anniversary Edition cars, which will be offered on V6 and R/T models, Dodge adds a flat-bottom steering wheel and embroidered floor mats as a part of the package. Scroll down for the full press release for these commemorative models.

The Dodge Demon gets a Drag Mode and a lesson in Newtonian physics

It's Thursday morning, which means we have more news on the upcoming Dodge Demon, the pumped-up Challenger Hellcat variant that's looking to cause mayhem at a drag strip near you. This week's video, "Third Law," shows the Demon's revised suspension in action and displays another one of SRT's cryptic messages. Dodge claims that the 6.2-liter supercharged Hemi V8 in the Hellcat twins is compromised because it's fitted to a car that needs to be comfortable on the street in addition to a performer on the drag strip. Not so with the Demon, as Dodge says the car is "designed to be highly competent in all drive modes and configurations," including the all-new Drag Mode. Dodge says details about the new mode will trickle out over the next few weeks, but all the info this week focused on suspension. The "Third Law" in this week's title refers to Isaac Newton and motion: "When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body." We're not sure what Newton would have thought seeing the sidewall wrinkling Nitto NT05R drag radials in action, but he'd probably have a reaction of some sort himself. An ideal suspension setup for the drag strip makes for a poor setup on the road. As Dodge puts it, the "old school" way to set up a drag car was to "get the quickest reacting springs upfront, the softest rebound front shocks that wouldn't restrict the springs' reaction, remove any restrictions (sway bar) and increase the compression of the rear shocks." This would give a car great front to rear weight transfer but made for very poor lateral direction control, meaning minor corrections were difficult. The Demon's Drag Mode will use electronics to give the car the best combination of launch and lateral stability. Dodge listed some of the parts to help aid in this goal. They also gave us a few equations that we can't make sense of. Let us know if you have any clues. Hardware: 35 percent lower rate front springs/28 percent lower rate rear springs 75 percent lower rate hollow front sway bar/44 percent lower rate rear sway bar Drag-tuned Bilstein Adaptive Damping Shocks Software: Rear = F/F and Front = F/S F/F – F/S maintained @ wide open throttle (WOT) F/F – F/F < WOT Traction control disabled/ESC maintained Result: 13.5=575@500 Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Gas prices down, 707-hp engine production up... USA!

On Saturday, the United States of America will celebrate its 239th birthday. That means fireworks, barbecues, block parties, and, oh yeah, Hellcat engines and low fuel prices. The most American of (Mexican-built) powerplants, the big, loud, supercharged, 707-horsepower Hemi is slated for yet another production boost to match up with some serious demand, while the dino juice it runs on is cheaper than it's been in over half a decade. The Saltillo, Mexico engine factory already produces some 4,000 Hellcat engines each year – that's in addition to the Tigershark four-cylinder, the 5.7-liter Hemi, and 6.4-liter SRT Hemi V8s – and it's not entirely clear how many more might get added to that total. What we do know, though, is that Fiat Chrysler can't build the engines fast enough. "We're going to build more [Hellcats] for 2016," SRT boss Tim Kuniskis told Automotive News. "It's a small sliver of what we sell, but it really creates a halo for the rest of the lineup. For example, the next highest car, the Scat Pack Challenger, I have essentially a zero-day supply. It's sold out." This bit of good news comes on the back of something equally good – low summer gas prices. According to the US Energy Information Administration, the nationwide average for for "all formulations" of fuel in June sits at $2.885. Ignoring the remarkably low prices we saw in January and February of this year – figures that themselves hadn't been seen since May of 2009 – the national average hasn't sat that low since October 2010. So yes, it's a very a good time to be an American gearhead. News Source: Automotive News - sub. req., US Energy Information AdministrationImage Credit: US EIA Green Plants/Manufacturing Dodge Fuel Efficiency Coupe Performance Sedan dodge challenger srt tim kuniskis dodge charger srt