2005 Dodge Ram 1500 Slt Standard Cab Pickup 2-door 5.7l on 2040-cars

Auto blog

Watch these Dodge Demons explode on a Texas drag strip

The Dodge Challenger SRT Demon is extremely quick. It can hit 60 mph from a dead stop in less time than it takes to read this sentence thanks to its supercharged 6.2-liter V8. That engine makes up to 840 horsepower and 770 pound-feet of torque, depending on what octane is running through the fuel lines. That's a ton of power going solely to the rear wheels. So much so that Dodge developed a number of features and a new set of tires specifically for the car. In our time with the Demon, the car took abuse run after run on a drag strip without skipping a beat, but it seems some actual owners aren't quite so lucky. Just take a look at what happened to a few of these cars. You can see the whole car shake and jitter right as the whole rear explodes in front of the tree. It seems the initial shock from the launch — the most taxing bit of any drag run — is what kills the differentials. Catastrophic failure is rarely pretty, but it is neat to see the whole thing occur in slow motion. Three more cars — four stock and one modified in total — suffered similar fates. Not a great look for Dodge or SRT. According to The Drive, a private drag event in Texas drew a number of Demon owners all trying to beat NHRA NHRA Top Fuel racer Leah Pritchett's time in her personal Dodge Demon — 42 stock Demons attended along with five modified cars. While no one managed to match her 9.65-second quarter-mile run, a few owners did dip below 10 seconds. Now, there are a few of caveats we must address. First, with any modified car, you run the risk of breaking something, even with a car that's set up from stock specifically for drag strips. Even a set of tires like the Mickey Thompsons shown in the video above can have an effect on driveline components. Horsepower may be king, but it's torque that's the rear killer. All that torque sends a shock through the car. Adding even more with aftermarket parts increases the risk of something failing. The modified car was apparently pushing out about 1,000 horsepower. That said, four of the five vehicles were stock, so any extra power or torque should theoretically be a non-factor. The drag strip's surface was maintained by a company called Mass Traction. FCA used Mass Traction during the Demon's development, so that too should be a non-factor in the part's failure. It's unclear what exactly caused the failures, though The Drive reports that FCA officials are investigating the matter. Related Video: This content is hosted by a third party.

The Dodge Demon is leaked in Fast 8 video with Vin Diesel

It's only week two of the twelve-part Dodge Demon teaser roll out, and it already appears the metaphorical Hellcat is out of the bag. A YouTube video featuring Vin Diesel discussing The Fate of the Furious ( Fast 8) has what are almost certainly two Dodge Challenger Demons parked right in the background. So much for three months worth of build up and mystique. The two cars in the video appear to have the new logo affixed to the fender, right where the current Hellcat logo resides. In addition, the wheels and the massive hood scoop both appear to be the same relative shape as the ones briefly flashed in the latest teaser video. While we can't be 100 percent certain this is really a Demon, all the evidence points to yes. Even if this spoiled Dodge's plans, actually seeing the car here makes us even more excited for the full reveal. We still don't know all the final specs, save that it'll be 200 lbs lighter, so there is still some mystery to be had. The Challenger and Charger Hellcat twins, some of the most brazen and brutish machines currently on the road, were already cranked up to 11. The Demon, with its wide fender flares and comically large hood scoop looks makes the standard car look tame by comparison. We can't wait. Related Video: News Source: YouTube Design/Style Dodge Coupe Performance dodge demon Vin Diesel dodge hellcat dodge challenger hellcat

2020 Dodge Charger pricing starts at $31,390

We've been talking about the 2020 Dodge Charger for three months, and it's finally time to start doing the math on trade-in values and loan payments. The 2020 Charger lineup starts with the SXT in rear-wheel-drive trim priced at $29,895, plus a $1,495 destination charge for a total of $31,390. That's a $425 bump over the 2019 model. The rest of the range doesn't get a price bump higher than $250 save for the Hellcat Widebody. The 2019 Charger didn't offer Widebody variants, so those are new for 2020. The lineup with MSRP changes from 2019: Charger GT RWD $33,390 ($150 more than 2019) Charger SXT AWD $35,090 ($25 more) Charger R/T $37,890 ($150 more) Charger Scat Pack $41,490 ($250 less) Charger Scat Pack Widebody $47,490 (brand new model) Charger SRT Hellcat Widebody $71,140 ($2,150 more than 2019 non-widebody) Daytona 50th Anniversary Edition $75,635 (brand new model) There's a price differential of $44,245 from bottom to top. Even more relevant to the Charger faithful, there's a displacement and power differential from the 3.6-liter Pentastar V6 in the SXT with 292 horsepower and 260 pound-feet of torque to the 6.2-liter supercharged Hemi V8 in the Charger Hellcat Widebody Daytona 50th Anniversary Edition with 717 hp and 650 lb-ft of torque. Dodge plumps the Scat Pack in the middle as having the "most horsepower per dollar," with its 392-cubic-inch Hemi V8 pumping 485 hp and 475 lb-ft. In the amusement park business, this is what's called "Fun for everyone." The Scat Pack Widebody makes a break from its standard sibling with stiffer springs, larger sway bars, and shocks, and retuned dampers. Changes throughout the rest of the lineup save for the SXT center on new wheel and tire options, and an updated Performance Handling Group on the GT and R/T trims. The 2020 Charger order book opens in the fall, but America's family-friendly muscle car won't start hitting dealer lots until early 2020.