2005 Dodge Ram 1500 Daytona Must See on 2040-cars

Auto blog

Chrysler to accelerate production of 2013 Ram and V6 engines

Chrysler is adding a third shift at its Warren Truck plant to meet demand for the new 2013 Ram pickup. And with tight supplies of its Pentastar V6, the company is also boosting output at its Mack Engine plant.
The expansions will add 1,250 jobs and are part of a $238 million investment by Chrysler in the Detroit area. Warren's third shift will begin work sometime in the spring, a Chrysler rep told Automotive News. Mack's increased Pentastar production a could include both 3.6 and 3.2-liter engines.
The company says it also plans to invest $40 million in its Trenton Engine plant to allow for production of a 3.2-liter V6 as well as the Tigershark inline-four for the upcoming Jeep Liberty replacement.

Dodge Viper recall requires small-handed mechanics

It has been over a year since Chrysler first announced its recall of 3,660 2003-2004 Dodge Vipers because the airbag could suddenly deploy. The repairs are finally beginning, and it appears to be a nightmare for mechanics.
According to the automaker's filing with the National Highway Traffic Safety Administration, the airbag control module can fail, which causes the bag or the seatbelt pre-tensioner to deploy without warning. It took over a year to design the new parts, according to The New York Times. However, Chrysler finally has a new "jumper harness with an in-line diode filter circuit" ready to fix the problem.
The dilemma now moves to the mechanics who have to actually install the part. A 47-step guide from Chrysler explains that the procedure should take about two hours. It's not an easy job, though. Most of the dashboard has to be taken apart, and the instructions include this helpful bit of advice: "Installing the jumper harness and filter box into position is not an easy task. Patience, perseverance, and small hands are required." We wish the best of luck to them. The fix comes just in time for the Vipers to enjoy the summer sun.

2015 Dodge Charger darts into NY traffic

Meet the refreshed 2015 Dodge Charger; notice anything different? You would have to be pretty farsighted to miss the sedan's new Dart-like nose, and it's likely going to be quite polarizing to the car's fans. Gone are the previous furrowed, aggressive headlights in favor of a wider, friendlier look.
While the more rounded headlights and narrower grille are going to be the first thing most people notice, Dodge claims its designers have made changes to nearly every panel on the Charger. The hood dips down deeper at the front, and the doors show off a more angled version of the car's shoulder blister. LED running lights and taillights are standard on all models, and SXT and RT trims get LED foglights. Even though the front might not be as intimidating, Dodge has hung onto the sedan's muscular stance with angular contours making up the rest of the redesign.
Under the hood is the same engine range you've come to know over recent years. Both the 5.7-liter V8 and the 3.6-liter V6 return for 2015, with the Hemi making 370 horsepower and 395 pound-feet of torque, and the standard Pentestar outputting 292 hp and 260 lb-ft. All models are now equipped with Chrysler's TorqueFlight eight-speed automatic as standard. Fuel economy for V8 Chargers is predicted at 16 miles per gallon city and 25 mpg highway, compared to 15 mpg / 25 mpg last year with a five-speed automatic. All models also come with electric power steering, and the axles are cast from aluminum to save weight.