2004 Ram Gtx Hemi on 2040-cars

Auto blog

Daily Driver: 2015 Dodge Charger SRT Hellcat

Daily Driver videos are micro-reviews of vehicles in the Autoblog press fleet, reviewed by the staffers who drive them every day. Today's Daily Driver features the 2015 Dodge Charger SRT Hellcat, reviewed by Greg Migliore. You can watch the video above or read a transcript below. Watch more Autoblog videos at /videos. VIDEO TRANSCRIPT: [00:00:00] Hey, everybody. It's Greg Migliore and today I am driving a 707-horsepower Dodge Charger. That can only mean one thing: I'm driving the Hellcat. Naturally, the spotlight feature of this car is the 6.2-liter supercharged Hemi V8. Makes 707 horsepower and 650 pound feet of torque. [00:00:30] Now naturally the engine sounds great and you can hear all of those horses going out the exhaust in back, which I think the Dodge guys have tuned really well. I think it's got one of the more unique sounds in the industry. All that horsepower will do that, but they've tuned it so there's a low kind of growl, and then it burbles and it's angry [00:01:00], it's visceral. I like it. It's intoxicating. It's different than other muscle cars. It's different than European exotics. I think it sounds great. I'm driving in sport right now which allows me to use the paddle shifters. I think it sounds a little better and the shifts of the eight-speed automatic transmission are a little bit more aggressive. For such a powerful car, Dodge did a nice job of tuning it to be actually pretty drivable. I just took a corner right there and the [00:01:30] steering offers you satisfying weight to your inputs. It's a little bit of a heavier steering, especially compared to some of the earlier generation Chargers. It's sporty, but it's not crazy. The design of the Dodge Charger is a critical element. That's why a lot of people buy this car, is it gives them that muscle car heritage look. The Hellcat has some special design cues that are also functional. You've got a couple of extra air intakes up front, keeps everything cool and breathing, the air flowing through; a nice spoiler in back [00:02:00] that helps keep the aero, and the downforce keeps you on the ground. The HID projector headlights really pop, especially at night, and in back you've got the LED taillights that spread out wide across the back end of this car like some of the great Chargers of the past. This car rolls on 20-inch black wheels with a spiderweb design. I think they look good. They're kind of low-key, which I think is great.

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

The first production 1992 Dodge Viper RT/10 is up for grabs

The 1992 Dodge Viper RT/10 was a game-changer both for parent company Chrysler and the U.S. auto industry at large. While it was significant for bringing its automaker out of its dull, post-1980s funk, it also lit a fire under the rest of Detroit. If it hadn't been for the Viper, the world may not have gotten the C5 Chevrolet Corvette Z06 (and its many world-class successors) or the revived Ford GT.  And the very first one is headed to auction.  This Viper is particularly special for two reasons. Not only was it the first production RT/10 to roll off the line at Chrysler's Mack Avenue plant (the Viper wouldn't move to Conner Avenue Assembly until 1996), but it was immediately scooped up by industry icon and then-Chrysler executive Lee Iacocca, who famously ushered fellow great Bob Lutz on stage at the Viper concept's reveal and told him to "build the damn thing." Even if you've never heard of Iacocca, you're certainly familiar with the cars he's influenced, whether you know it or not. Whether it's the Chrysler K-Car platform (and the minivan segment it spawned) or the 1964 Ford Mustang, one of Iacocca's projects has undoubtedly touched your life in one way or another.  Showing just over 6,200 miles, this Viper remained in Iacocca's possession from day one until his passing in 2019. Even without the Iacocca connection, this would be a special lot. VIN #001 is all-original, packing the 8.0-liter V10 engine that made the Viper famous. Dodge's bruiser was also known for being light on superfluous extras, such as anti-lock brakes, which the Viper didn't receive until 2001 — just before the second-generation model was discontinued.  Bonhams projects this Viper will go for between $100,000 and $125,000. That's probably a bargain. Opportunities to own such a unique and significant piece of automotive history come around very rarely, and considering this is about the same amount FCA was charging for a brand-new Viper when it went out production in 2017, it's not an unreasonable price point.  The Viper will cross the block on Jan. 16.