2004 Dodge Ram Srt-10 Srt-10 Red V-10 8.3l Engine Manual Transmission on 2040-cars

Auto blog

How to update and secure a vulnerable Chrysler Uconnect system

If you own one of the 1.4 million vehicles affected by the recent Chrysler software recall, you may want to watch this video. In it, we explain how to get the latest infotainment software loaded onto the 8.4-inch Uconnect system. The recall was a response to the findings of researchers who were able to hack into and remotely control a 2014 Jeep Cherokee through its cellular connection. Although Fiat Chrysler has worked with Sprint to plug most of the holes on the carrier side, there are still some vulnerabilities that only this latest software version can patch. Owners have three options to get the update: download it now, wait for a USB stick in the mail, or take the vehicle to an FCA dealer. Chrysler will be sending USB sticks loaded with the software update to customers. Anyone with an internet connection and a USB stick of their own with at least 4 GB capacity can speed things up by downloading the patch from the Uconnect website. We cover that process from start to finish in the video, with the final portion still applicable to those using the FCA-supplied USB stick. If after watching this you still don't want to tackle the patch yourself, you can take your vehicle to the dealer to have it done. Also note that this process is the same for all Uconnect updates, not just the one patching the exploits. Our demonstrator vehicle is a 2015 Ram 1500 pickup. The procedure should be very similar on other products with the 8.4-inch Uconnect system, with only the location of the USB port varying. Once you have the USB stick with the software on it – either after having downloaded it yourself or receiving it in the mail from Chrysler – the installation process is relatively simple. It takes about 15 minutes to perform the update; we edited out the wait in the video. To check whether or not your car's 8.4-inch Uconnect system is running the latest software, go to System Information on the touch screen's Settings page and look at Software Version. The update related to the recall is version 15.17.5. Related Video: Recalls Chrysler Dodge Jeep RAM Safety Technology Infotainment Videos Original Video hacking

Rare Dodge Shelby Dakota is a very '80s sport truck

The late-great Carroll Shelby built an incredibly successful career of making all sorts of cars faster, more often than not, with a bigger or more potent engine under the hood. The icons are well known—legends like the Shelby Cobra, GT350 Mustang, and the big GT500. But by the 1980s, Shelby was plying his trade over at Chrysler, at the behest of chairman Lee Iacocca, churning out special editions like the Dodge Shelby Charger, zippy CSX, rorty GLHS, and this—the 1989 Shelby Dakota muscle truck. 1,500 of these racy pickups were built for just one year and a whole two-and-a-half decades later they still turn heads. This one especially. The spotless pickup recently turned up for sale online , and its odometer reads a claimed 25,307 miles. So what makes these rarified work trucks special? As with most Shelbys, it starts under the hood. Up until 1989, the standard Dodge Dakota pickups were offered in only four-cylinder and V6 variants. But Dodge (and Shelby) wanted more, so the larger 5.2-liter Magnum V8 from Dodge's full-size pickup was shoehorned into the midsize Dakota, albeit not effortlessly. To fit, Dodge had to swap the V8's belt-driven fan for an electric unit mounted in front of the radiator. That did the trick, as well as earned the V8 a few extra ponies, pushing the special Dakota up to 175 horsepower and 270 lb.-ft. of torque. That performance may sound paltry by today's standards, but in 1989 it was seen as quite sporty, and netted a zero to 60 mph dash in 8.5 seconds. A four-speed automatic with lockup torque converter transmitted that power to the rear wheels. Additional Shelby performance goodies included a limited-slip differential, transmission cooler, along with a host of eye-catching body mods, including a unique air dam and bumpers, Shelby floor mats, monogramed seats and door panels, a "CS" steering wheel, 15-spoke hollow alloy wheels, and shouty body graphics. While the Shelby Dakota didn't return for 1990, its V8 legacy did continue, and in 1991 the 5.2-liter eight-cylinder became an option on new Dakotas. Of the 1,500 Shelby Dakota pickups built, 860 were dressed in red while a rarer 640 came adorned in Bright White. This '89 is said to be #245 of those white trucks, sold new to its original (and sole) owner in Mechanicsburg, Pennsylvania, for $15,985 (the Shelby package cost $3,933 in its day). Currently, it's demanding bids north of $10,000 for its low-mileage originality. Related Video: This content is hosted by a third party.

FCA's shifter fiasco proves novel gear selectors are a bad idea

What's wrong with PRNDL? Why are automakers trying to overly complicate the simple task of selecting gears? If there's any lesson to learn from the recent news that NHTSA is investigating 853,000 Fiat Chrysler vehicles over its problematic gear selectors, it's that the trend of fancy shifters needs to stop. Now. Last year, NHTSA opened an investigation into Jeep Grand Cherokee models, and has now expanded this probe to include the 2012-14 Chrysler 300 and Dodge Charger. The problem? The shifter – assembled by ZF – is confusing for many drivers. "Testing ... indicates that operation of the (electronic) shifter is not intuitive and provides poor tactile and visual feedback to the driver, increasing the potential for unintended gear selection," a NHTSA document states. More than 100 crashes and over a dozen injuries are linked to this problem, according to The Detroit Free Press. To us, the problem isn't just limited to FCA. These unnecessarily novel gear selectors are spreading like wildfire across the industry. Honda and Acura use a weird pushbutton setup. Lincolns have buttons on the dashboard. Jaguar's shifter electronically raises out of the center console. Mercedes uses a stalk with up-for-Reverse, down-for-Drive, push-for-Neutral arrangement. And what the hell is BMW thinking with its M cars? FCA has since abandoned the confusing shifters in question. The 300, Charger, and Grand Cherokee now use the rotary shift dial that's quickly proliferating across the company's brands. Simplistic gear selectors might not be sexy, but no one ever complained about not being able to find the right gear in a Hyundai Sonata. What's most interesting is that this NHTSA investigation could push FCA – and possibly other automakers – to redesign vehicle functions that otherwise operate as designed. Just because most people will never have a problem putting a Dodge Charger in Reverse doesn't mean there isn't a flaw with the design. But perhaps a more simplistic solution – good ol' PRNDL – would have prevented these issues from the start. Related Video: News Source: The Detroit Free PressImage Credit: Copyright 2016 AOL Government/Legal Chrysler Dodge Jeep FCA shifters