2003 Dodge Ram 1500 Slt Crew Cab Pickup 4-door 5.7l on 2040-cars

Auto blog

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

Viper fans are at the Nurburgring to reclaim production-car speed record

With the outgoing generation of the Viper, Dodge missed a fabulous opportunity to set another Nurburgring lap record. The company did it, twice, with the previous-generation Viper ACR, but never went back with the latest ACR, and it definitely won't now that the car is being discontinued. This is why a group of Viper fans began fundraising back in January to take ACRs to the 'Ring for one more shot at glory. And, right now, that group is in Germany preparing for the attempt. The team made it thanks to support from GoFundMe donors, and sponsorship from Kumho Tires and Prefix, a design and prototype company based in Michigan. They're using two Viper ACR GTS-R commemorative-edition cars, which are appropriate for competing track cars since they have the same white-with-blue-stripes color scheme as Dodge's old Viper GTS-R racecars. The cars are supplied from ViperExchange and BJ Motors and equipped with Kumho Ecsta V720 tires. According to the group's Facebook page, the team has been practicing since Wednesday, July 19. A video posted today highlighted that the only mechanical issue so far has been an overheating problem that was solved with a new thermostat. Each car is running a different suspension setup for practice - one soft, the other hard - and they'll adjust them as needed. The plan is that both cars will use the same setup on the record attempt. To claim the record without any argument will require beating the 6:45.9 time set by the Nio EP9 electric car. Right behind it is the Radical SR8LM, which is technically street-legal, but not really a street car. It set a time of 6:48. As for true street cars with gasoline engines, the target the Viper team will really want to beat is the Lamborghini Huracan Performante, which pulled off a time of 6:52. You can track the team's progress at its Facebook page. Related Video: Image Credit: Dodge Auto News Motorsports Dodge Coupe Performance Supercars dodge viper acr nio ep9

Dodge Durango Shaker concept: A 392 V8 in front of six Viper seats

When done right, a parts-bin special can be a beautiful thing. This Dodge Durango Shaker concept for the 2016 SEMA show is one such vehicle, and it's easily our favorite Mopar debuting in Vegas. The key, of course, is pulling from the right bins. Take a tour and you'll see Charger, Challenger, and Viper pieces grafted onto this slick crossover. The featured special part is the big, 6.4-liter 392 Hemi V8 that's been dropped under the hood; it's sourced from the SRT Challenger and Charger where it makes 485 horsepower and 475 pound-feet of torque. With that in place, the fabricators cut a big hole in that hood for the Challenger's awesome optional shaker scoop. It wasn't an easy installation; it required a custom spacer for the intake to make sure everything lined up with the hole properly. View 17 Photos Apparently there were some Viper seats lying around, so six of them were stuck into this Durango. Makes sense. It does lose a bit of people-carrying capability as a result, since only two seats fit in each row, and the seats don't fold for extra cargo room. A Dodge spokesperson attested to the fact that all three rows are usable, if not totally comfortable. But then stock third-row seats aren't always that comfortable anyway. Seriously, though, Viper seats. We don't care how comfortable or usable the result is. Although you might not give it a second thought, even the fuel filler needed some special attention. This piece was also lifted from a Dodge Challenger, and it was taken along with the surrounding sheet metal. Because of the different orientation of the filler cover on the Challenger, the builders decided the easiest way to get it to fit was to chop the fuel filler section out and weld it onto the Durango. The designers also put a little blue Stig on the cover. And those are just the cool parts that were hard to install. This Durango features plenty of other slick details, like the custom bumpers, fender flares, and side skirts. Everything is painted B5 Blue with matte black and carbon accents all around. Up front, the bumper hides a pair of fog lights stolen from a Challenger Hellcat – and yes, they're the ones with intakes in the middle. The grille is also a custom piece, losing the standard crosshair design for better airflow. The fender flares cover up some seriously wide, 305-section tires at all four corners, which are hauled down by Hellcat brakes. The rear bumper bumper contains a stylish center-exit exhaust with dual tips.