1998 Dodge Ram 1500 4x4 on 2040-cars

Auto blog

Chrysler recalling 49K Chargers for headlight components

Chrysler has issued a recall for about 49,375 2011 and 2012 Dodge Chargers with halogen headlamps due to a problem with the lights. The automaker says that there could be an issue with the jumper harness and other related components.
The automaker says that 43,450 cars are affected in the US, 2,850 in Canada, 375 in Mexico and 2,700 outside of North America. The vehicles will have their headlight assemblies, including the jumper harnesses and bulbs, inspected and potentially replaced. Dodge says that its engineers investigated reports of that were similar to what was found when it recalled about 10,000 police Chargers in 2012 for overheating light components. There have been no injuries or accidents related to fault, according to Chrysler.
The automaker will be in contact with affected owners, and schedule the service. Naturally, any repairs will be free of charge. Scroll down for the company's full announcement.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Old Dodge vans are big in Japan

One of the great things about Japan and its car culture is that it plays host to some of the most unusual and unique vehicle trends in the world. Whether it's neon-clad Lamborghinis or luxury sedans with insane negative camber, the country always seems to have something new up its sleeve. One of the most surprising trends is track-ready, full-size Dodge vans called Dajibans, and the video above presents a great look at these absurd machines. This isn't the first time we've covered these racing Dodge vans, but it's a subculture too awesome not to merit a second look. For one thing, just as American fans of Japanese cars here like to use JDM (Japanese Domestic Market) parts on their cars, the owners of these Dodges like to use American parts. Many of the vans feature Little Tree air fresheners inside and even have Spectre air filters on the intakes. Who would've thought there would be a market for Autozone's bread and butter auto accessories? Plus, these vans get some other impressive mods. Notice that some vans that appear to have stock metal bumpers, but they're actually fiberglass replicas in the original shape and given a chrome-like paint job. The video's host, an Australian drift fanatic named Alexi who lives in Japan and runs website called Noriyaro.com, gets some great onboard footage, too. One of the vans he rides along in is powered by a generally stock 318 Dodge V8, and still has the original automatic transmission and column shifter. Impressively, the driver manages to manually shift it without grabbing the wrong gear, and even rev matches the shifts. Alexi explains that the driver can catch neutral in-between gears three and two, so there's a brief moment where he can blip the throttle. There's even more information in the video, and it's all fantastic fun to watch. If you decide you haven't seen enough of Dajibans, you can also check out our previous post on it, which is more polished and provides some history and context to the trend. Related Video: News Source: Noriyaro via YouTube Auto News Dodge Minivan/Van Performance Videos JDM trends