08 Dodge Ram 1500 Slt 4x4 Quad Cab Long Bed 1 Owner Carfax & Autocheck Cert!!!!! on 2040-cars

Auto blog

Stellantis is open to putting a gas engine in its EVs to meet demand

With the EV segment caught in a tug-of-war between market demand and government regulations, carmakers are having to adapt to avoid losing both money and sales. Stellantis is keeping every option on the table, including putting a gasoline engine in its electric models. Natalie Knight, the chief financial officer for Stellantis, made the announcement while presenting the carmaker's first-quarter shipment and revenues results. She cited the Jeep Wagoneer S as an example: Unveiled in January 2024, it will go on sale with an electric powertrain, but the brand hasn't ruled out expanding the lineup with a gasoline-powered model later on, according to Wards Auto. It could be a hybrid, or it might not get any type of electrification. The call will depend on whether there is "a clear demand for that in the market," the executive said. Compare that with comments from new Jeep CEO Antonio Filosa, who has said hybridizing the Wagoneer S isn't in the cards — but making a PHEV version of the all-electric upcoming Recon, however, might be. "I don't want to ignore the fact that we want to stay close to the consumer, and if we see there's an opportunity with those models that we introduced as BEVs first, we'll look into that," Knight said. Stellantis plans to launch 25 new models globally in 2024, and 18 of those will go on sale with electric power. However, that doesn't necessarily mean they'll remain electric-only throughout their production run. The brands that live under the Stellantis umbrella can build a gasoline-powered version of an EV with relative ease because many of the cars in the group's portfolio ride on a multi-energy platform. For example, the new Dodge Charger (pictured) will go on sale with an electric drivetrain later in 2024, but the range will grow with the addition of a 3.0-liter straight-six in 2025. Across the pond, the Jeep Avenger (a small, hatchback-like crossover not designed with our market in mind) was hyped as an all-electric model when it made its debut in 2023, but it quietly gained a gasoline-electric hybrid drivetrain in early 2024. The city-friendly Peugeot 208 is offered with piston or battery power, too. One of the next electric recipients of a gasoline engine might be the new-to-us Fiat 500e. The retro-styled hatchback has exclusively been available as an EV since it went on sale in Europe in 2020, but executives are reportedly looking at turning it into a hybrid due to slow sales.

What's the deal with Chrysler demanding colleges crush their Vipers? [w/video]

Students and teachers at a Washington community college are up in arms following an order from Chrysler that it must destroy the pre-production Dodge Viper that was donated to the school's automotive technology program ten years ago.
The Viper in question is said to be the fourth off the production line, based on its VIN, and has had its emissions controls disabled, allowing its ten-cylinder engine to produce 600 horsepower, according to a report from Yahoo! Autos. As one of the first Vipers ever produced, the school's AT instructors claim it could be worth $250,000 in a museum, while a local news report purports that Jay Leno once tried to purchase the car, but the sale was prevented by Chrysler.
As pointed out by our friends at Autobytel, though, there are a lot of things in this story that don't quite add up. Immediately noticeable from the news report embedded below - which shows the car at South Puget Sound Community College - is that the car in question is not a 1992 model. When the Viper went on sale in 1992, it was only available as an RT/10 with a (flimsy) soft top, like the red car shown above. But the car featured in the report from KING5 News (inset image) is clearly a hardtop Viper GTS, which didn't enter production until 1996. And even if, as reported by a local newspaper, the hardtop featured is a prototype, it doesn't explain the lack of another iconic feature of the first Vipers - their distinctive side pipes. This kind of pokes holes in the school's argument that this is the fourth Viper to ever roll down the line. At best, this appears to be a pre-production Viper GTS.

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.