05 Ram Srt10 Quad Cab Viper Truck 500hp V10 19k Miles!!! on 2040-cars

Auto blog

FCA adds 88k Dodge Challengers to Takata inflator recall

The Takata airbag inflator recall from FCA US is growing 88,346 vehicles larger in the US after the company's discovery of the faulty parts in the 2008-2010 Dodge Challenger. The affected examples have production dates between September 19, 2007, and October 29, 2010, and the coupes need the replacement components on the driver's side. According to chronology posted by the National Highway Traffic Safety Administration (as a PDF), the automaker was auditing the models covered under the campaign in July and "identified a population of vehicles that was inadvertently excluded." Initially, FCA believed these cars were using an unrecalled Takata inflator. The audit revealed that the affected cars indeed used a recalled version. As with the rest of the faulty parts, exposure to moisture can cause them to ignite too quickly during an airbag deployment and spray shrapnel at occupants. The problem has been linked to at least eight deaths worldwide and a vehicle fire in Japan. The Challenger wasn't previously part of FCA's 3.3-million unit national campaign or the subsequent expansion. According to FCA US the parts to complete the repairs in these Challengers aren't currently available. However, owners will be notified of the issue by mail starting August 14. They will receive a second notice when the parts become available. Related Video: RECALL Subject : Driver Side Frontal Air Bag Inflator May Rupture Report Receipt Date: JUL 10, 2015 NHTSA Campaign Number: 15V444000 Component(s): AIR BAGS Potential Number of Units Affected: 88,346 All Products Associated with this Recall Vehicle Make Model Model Year(s) DODGE CHALLENGER 2008-2010 Details Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2008-2010 Dodge Challenger vehicles manufactured September 19, 2007, to October 29, 2010. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture. CONSEQUENCE: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death. REMEDY: Chrysler will notify owners, and dealers will replace the driver's frontal air bag inflator, free of charge. Parts to remedy the vehicles are not currently available. Interim notices will be mailed to owners beginning August 14, 2015.

2019 Dodge Charger SRT Hellcat Octane Edition fuels your dreams for a limited time

Few automakers love special-edition models quite as much as FCA. It's particularly prevalent in the Jeep and Ram lineups, but other makes get some love, too. Take a look at the new 2019 Dodge Charger SRT Hellcat Octane Edition, a special blacked-out model that's set to arrive at dealerships this fall. The car is available to order now, but Dodge says the books will only be open for a limited amount of time. The Octane Edition is available in two appropriately named colors: Pitch Black and White Knuckle. A pair of matte black stripes run down the middle of the car, flanked on both sides by a thin Octane Red stripe. The 20-inch wheels are painted gloss black and have a knurled bead to keep the tire from slipping on the rim. The Brembo brake package is included, with the six-piston front and four-piston rear calipers painted Octane Red to match the stripes. Inside, the Octane Edition gets houndstooth inserts in the SRT sport seats. There are red Hellcat logos, red seat belts and red stitching on the doors, seats, dash center console and steering wheel. The Octane Package adds $1,495 to the $68,740 base MSRP of a 2019 Charger Hellcat. Like all Hellcat models, the Charger comes with a supercharged 6.2-liter Hemi V8 making 707 horsepower and 650 pound-feet of torque. Power is sent to the rear wheels through an eight-speed automatic. Changes for '19 include a new grille with two inlets to feed more air under the hood. The cars also get launch control, line lock, a cooler for the supercharger as well as a torque reserve system that preloads the supercharger for better launches.

Chop the top of your new Dodge Viper for $35,000

We have good news, and we have bad news. First, the good: It's now possible to get a brand-new Dodge Viper roadster, which is nice, considering we're in the dead of summer and many of us like wind-in-the-hair motoring. Now, the bad: This is not a factory option from the automaker, instead coming courtesy of an aftermarket company called Prefix Performance, and that means it's going to cost you some serious coin.
Called Medusa, this drop-top Viper was created without the knowledge or consent of Dodge, but that's probably fine because Prefix works with the automaker already for the final preparation of the American supercar, including paint. According to the company, the current, fifth-gen Viper was built with a convertible version in mind, so no chassis strengthening is required. From the looks of the somewhat grainy photos available, the conversion appears of very high quality.
Want one? Well, that means you're going to need to procure a Viper - Prefix has 10 units ready for transformation as it stands - and that's going to cost at the very least $102,485. Then, you'll need to write a check for an additional $35,000 for Prefix to surgically remove the car's roof. Thing is, for that kind of cash, a prospective owner could buy, among other very nice options, a Viper hardtop and a loaded Miata, or a Corvette Stingray convertible and several pockets full of change. Or, perhaps a new Viper hardtop and a used, first-gen Viper convertible?