05 Dodge Ram 1500 4x4 Protectiongroup/anti-spindifferentialrearaxle/alloywheels on 2040-cars

Auto blog

Dodge vs. Chevy tug-of-war taken to the extreme

They say "idle hands are the devil's playground," but said playgrounds grow to Disney-sized proportions when a pair of jacked-up trucks, two egos, a chain and an empty mall parking lot are involved. Proof of this is the video below, which shows a Cummins-powered Dodge Ram circa 2006 to 2008 chained tail-to-tail with what looks to be a gasoline-powered Chevrolet Silverado from the late 1990s or early 2000s.
We don't necessarily have to tell you who wins this battle, but we'll let you see for yourself the lengths the "winning" driver goes to prove his point. There's plenty of foul language in the video below, so beware that this might be Not Safe For Work, and not that we should have to tell you, but please, do not try this at home.

All-wheel-drive Dodge Challenger GT confirmed by EPA website

The US Environmental Protection Agency accidentally confirmed the upcoming Dodge Challenger GT by posting fuel economy figures for the all-wheel-drive variant of the muscle car. According to FuelEconomy.gov, the Challenger GT, which will come with the 3.6-liter V6 when it's released, is rated to get 18 miles per gallon in the city and 27 miles per gallon on the highway, giving the vehicle a combined rating of 21 miles per gallon. Those figures are slightly lower than the rear-wheel-drive Challenger with the same engine, which gets 19 miles per gallon in the city and 30 miles per gallon on the highway. While previous reports indicated that Dodge is planning to release the all-wheel-drive Challenger GT sometime in 2017, the automaker hasn't confirmed the vehicle. (Mopar's all-wheel-drive concept from last year's SEMA Show is pictured above.) With the EPA putting out the car's official fuel economy figures, the all-wheel-drive muscle car is definitely coming, and should be here before the entire Challenger lineup gets its expected redesign in 2018. And yes, we're still hopeful that the so-called Challenger ADR we saw in spy photos means we'll see all wheel drive and Hellcat power. Because Hellcat everything. Related Video:

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat