Lifted 2005 Power Wagon on 2040-cars

Auto blog

2019 Dodge Challenger SRT Hellcat Redeye is the Demon spawn

The Demon has passed from us, but the Demon's spawn are here, so please allow them to introduce themselves. A new demi-Demon trim level has been anointed as the 2019 Dodge Challenger SRT Hellcat Redeye. Plus there's an updated Challenger SRT Hellcat and new Challenger R/T Scat Pack Widebody. Like with the Charger introduced this morning, they have inherited some of the best parts from the Demon. The Hellcat Redeye is possessed by the Demon's howling supercharged 6.2-liter Hemi, making 797 horsepower and 707 pound-feet of torque. Dodge proclaims it the "most powerful production V8" and "quickest production muscle car," with a 0-60 time of 3.4 seconds and quarter-mile time of 10.8 seconds at 131 mph. Top speed: 203 mph. Dodge can claim these superlatives, of course, because the 840-horsepower Demon's limited production run has ended. The Hellcat Redeye's Hemi is paired with an eight-speed automatic. Dodge says the powerplant gets 25 major component upgrades, including a larger supercharger (2.7 liters, up from 2.4) with higher boost pressure (14.5 psi, up from 11.6), strengthened connecting rods, pistons and valve train, high-capacity fuel injection system and improved lubrication. It gets a second fuel pump and a higher redline of 6,500 rpm. Theoretically, if you were someplace where you could operate at full throttle without letting up, Dodge says the Hemi would drain the fuel tank in under 11 minutes. Yet the car gets a 22 mpg highway rating from the EPA. View 30 Photos It also has the Torque Reserve system that starts building boost before launching, as well as the air conditioned intercooler to provide extra cool intake air. Both of these were features in the Demon. Furthermore, if the standard 2.62:1 final ratio isn't quick enough for you, Dodge offers a 3.09:1 rear axle. The Challenger SRT Hellcat Redeye also comes with the Demon and Hellcat Widebody's fat fender flares. It's an unsurprising inclusion, since you'll want as much tire as possible for all that power. Now, a mere clear-eyed Challenger SRT Hellcat gets a 10-horse boost for 2019 to 717 horsepower, and a smidge more torque at 656 pound feet. A six-speed manual transmission is standard, and an eight-speed automatic is an option. Both Hellcat models get the new dual-snorkel hood we've seen in spy shots. It's meant to evoke 1970s Dodge muscle cars. Dodge says the airflow from the hood alone reduces engine temperature by 4 degrees Fahrenheit.

NC dealer creates the convertible Challenger that Dodge won't build

Dodge still hasn't turned the Challenger into a convertible, and the odds of seeing a factory-built drop-top muscle car appear in showrooms are decreasing annually. Tired of waiting, a dealership in North Carolina teamed up with a Florida-based body shop to create a topless alternative to the Ford Mustang and the Chevrolet Camaro. It's the real thing, and it's for sale. Keffer Dodge, Chrysler, Ram and Jeep shipped three 2019 Challengers to a shop named Convertible Builders, according to Motor Authority. After losing their lid, they gained a cloth soft top that opens and closes at the push of a button. There's no word on what effect the conversion has on handling, or what Convertible Builders did to offset the loss of structural rigidity. The build didn't include mechanical modifications. Two of the convertibles are R/T Scat Pack models equipped with a 6.4-liter Hemi V8 engine that serves 485 horsepower and 475 pound-feet of torque. It's not a supercharged Hellcat V8, but it's potent enough to spin the rear wheels in third gear. The third, R/T-based model features a 375-horsepower, 5.7-liter V8. While our dream build would use a six-speed manual transmission, all three come with an eight-speed automatic that sends the engine's power to the rear wheels. Keffer's website lists the gray, white, and red cars at $64,000, $60,000, and $56,300, respectively. The regular R/T Scat Pack Widebody model starts at $46,245, and the eight-speed automatic adds another $1,595, so the convertible conversion adds about $16,000. It's your only option, unless you're brave enough to chop the top yourself, or patient enough to wait until the early 2020s. Dodge has already started developing the next-generation Challenger, so the current car is unlikely to spawn a convertible before it retires. Its replacement due out in 2021 or 2022 will allegedly ride on a wider, longer evolution of the Giorgio platform found under the Alfa Romeo Giulia, among other models, and unverified rumors claim it's being designed with a topless variant in mind from the get-go. It might resurrect the Barracuda nameplate originally assigned to Plymouth when it makes its debut. Auto News Dodge Convertible Performance

The first production 1992 Dodge Viper RT/10 is up for grabs

The 1992 Dodge Viper RT/10 was a game-changer both for parent company Chrysler and the U.S. auto industry at large. While it was significant for bringing its automaker out of its dull, post-1980s funk, it also lit a fire under the rest of Detroit. If it hadn't been for the Viper, the world may not have gotten the C5 Chevrolet Corvette Z06 (and its many world-class successors) or the revived Ford GT.  And the very first one is headed to auction.  This Viper is particularly special for two reasons. Not only was it the first production RT/10 to roll off the line at Chrysler's Mack Avenue plant (the Viper wouldn't move to Conner Avenue Assembly until 1996), but it was immediately scooped up by industry icon and then-Chrysler executive Lee Iacocca, who famously ushered fellow great Bob Lutz on stage at the Viper concept's reveal and told him to "build the damn thing." Even if you've never heard of Iacocca, you're certainly familiar with the cars he's influenced, whether you know it or not. Whether it's the Chrysler K-Car platform (and the minivan segment it spawned) or the 1964 Ford Mustang, one of Iacocca's projects has undoubtedly touched your life in one way or another.  Showing just over 6,200 miles, this Viper remained in Iacocca's possession from day one until his passing in 2019. Even without the Iacocca connection, this would be a special lot. VIN #001 is all-original, packing the 8.0-liter V10 engine that made the Viper famous. Dodge's bruiser was also known for being light on superfluous extras, such as anti-lock brakes, which the Viper didn't receive until 2001 — just before the second-generation model was discontinued.  Bonhams projects this Viper will go for between $100,000 and $125,000. That's probably a bargain. Opportunities to own such a unique and significant piece of automotive history come around very rarely, and considering this is about the same amount FCA was charging for a brand-new Viper when it went out production in 2017, it's not an unreasonable price point.  The Viper will cross the block on Jan. 16.