1967 Dodge Power Wagon on 2040-cars

Auto blog

Jeep Grand Cherokee, Dodge Durango to lose color options temporarily

In the market for a Jeep Grand Cherokee or Dodge Durango? Well, if you fancy a more expressive color for your new SUV, you'd better get your order in, or plan on waiting until well into 2015.
The SUVs will be limited to just four monochromatic shades - black, white, silver and gray - until at least February, thanks to an upgrade to the paint shop at the two vehicles' Jefferson North factory. For the Grand Cherokee, that means it's losing more than half its color palette while the Durango is dropping two-thirds of its color catalog.
The loss of colors is inconvenient, but the upgrade will have a slightly bigger effect on the overall supply of SUVs, as Chrysler will need to end its relentless build pace at the factory for a three-week shutdown starting on December 22. The good news for fans of the SUVs is that once the work is completed, we should see a gradual expansion of the color palettes for both the Durango and Grand Cherokee, beyond even what's offered now.

2020 Dodge Charger pricing starts at $31,390

We've been talking about the 2020 Dodge Charger for three months, and it's finally time to start doing the math on trade-in values and loan payments. The 2020 Charger lineup starts with the SXT in rear-wheel-drive trim priced at $29,895, plus a $1,495 destination charge for a total of $31,390. That's a $425 bump over the 2019 model. The rest of the range doesn't get a price bump higher than $250 save for the Hellcat Widebody. The 2019 Charger didn't offer Widebody variants, so those are new for 2020. The lineup with MSRP changes from 2019: Charger GT RWD $33,390 ($150 more than 2019) Charger SXT AWD $35,090 ($25 more) Charger R/T $37,890 ($150 more) Charger Scat Pack $41,490 ($250 less) Charger Scat Pack Widebody $47,490 (brand new model) Charger SRT Hellcat Widebody $71,140 ($2,150 more than 2019 non-widebody) Daytona 50th Anniversary Edition $75,635 (brand new model) There's a price differential of $44,245 from bottom to top. Even more relevant to the Charger faithful, there's a displacement and power differential from the 3.6-liter Pentastar V6 in the SXT with 292 horsepower and 260 pound-feet of torque to the 6.2-liter supercharged Hemi V8 in the Charger Hellcat Widebody Daytona 50th Anniversary Edition with 717 hp and 650 lb-ft of torque. Dodge plumps the Scat Pack in the middle as having the "most horsepower per dollar," with its 392-cubic-inch Hemi V8 pumping 485 hp and 475 lb-ft. In the amusement park business, this is what's called "Fun for everyone." The Scat Pack Widebody makes a break from its standard sibling with stiffer springs, larger sway bars, and shocks, and retuned dampers. Changes throughout the rest of the lineup save for the SXT center on new wheel and tire options, and an updated Performance Handling Group on the GT and R/T trims. The 2020 Charger order book opens in the fall, but America's family-friendly muscle car won't start hitting dealer lots until early 2020.

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric