1964 Dodge Polara Gasser Afx on 2040-cars

Auto blog

Marchionne nixes talk of a reborn Dodge Viper

UPDATE: According to Automobile Magazine's Todd Lassa, FCA chief Sergio Marchionne shot down the idea of a reborn Viper, saying "it's not in the plan." Marchionne was referring to Fiat Chrysler's five-year plan, which we've been covering in bits and pieces as the news filters out. But it's not out of the realm of possibility, apparently, as Marchionne reportedly said he'd be happy to see the reptilian supercar back in production. And it's not all bad news, anyway. A reborn Alfa Romeo 8C will get a carbon-fiber chassis holding a mid-mounted twin-turbo V6. With more than 700 horsepower, including an electrically-driven front axle, the car should hit 62 mph in fewer than 3 seconds. Also, three versions of a Maserati Alfieri will be produced, including a convertible. An electrified all-wheel-drive powertrain is planned. So, performance is coming from FCA, it just may not be from Dodge. View 36 Photos First came the mourning for the Dodge Viper, which ended production last year. Then came the Viper's continued sales run as a "Zombie Car;" we just wrote about how the Viper has racked up 11 sales so far this year, two of them in April. Now Car and Driver reports that the two-seater snake will return shorty for its second encore after being discontinued in 2009. The mag isn't equivocal about it, either, writing, "trust us: A new Viper is happening." It won't, however, be the same Viper that brought ten-cylinder brass knuckles to shake down other coupes for their wallets and jewelry. CD says we should expect the same front-mid-engine layout and rear-wheel drive tucked into a new spaceframe. That engine will lose two cylinders, with Chrysler's next-gen, aluminum-block V8 Hemi slotting into the engine bay. The previous Viper's V10 had grown to 8.4 liters and 640 horsepower by the time it drove into the sunset. CD guesses the coming Viper will start with a naturally-aspirated version of the Hemi V8 working up around 550 horsepower. Healthy doses of aluminum and carbon fiber would restrain the car's weight, on top of the weight loss from swapping an iron V10 for an aluminum V8. SRT could tart up the horsepower with a few performance trims, before a supercharged V8 with 700-plus horsepower arrives at some point after launch. The mag also suspects the initial offering will be a convertible, the hardtop appearing "a few years after launch," which could coincide with the more powerful engine. A row-your-own shifter will sit between the seats.

Dodge Hellcats change their stripes for 2016

If you've been on the fence about ordering up a new Dodge with Hellcat power, this might just provide the extra incentive you were looking for. Starting this month, Dodge is offering a new stripe option, exclusive to its most powerful muscle cars. The SRT Hellcat stripes are now available to order on the top-of-the-line, 707-horsepower versions of both the Charger and Challenger. The dual full-length stripes run all the way up from the front lip, over the grille, up the hood, accentuating the NACA duct, along the roof, down the trunklid, across the rear spoiler, and down the rear bumper. They feature a carbon-fiber texture, and can be ordered with any of eleven colors for an extra $995. Along with the stripes, Dodge has also announced that it is extending the availability of the exclusive Plum Crazy color – which was originally scheduled to expire at the end of December – for another month. The throwback hue can be ordered on Charger and Challenger models ranging from the SXT through the R/T models all the way up to the SRT 392 and Hellcat. 2016 CHALLENGER AND CHARGER SRT HELLCAT MODELS EARN EXCLUSIVE STRIPES, DODGE EXTENDS PLUM CRAZY PAINT - All-new SRT Hellcat dual exterior stripe design adds even more Dodge attitude to 2016 Challenger and Charger SRT Hellcat models - SRT Hellcat-exclusive dual full-length carbon-fiber pattern stripes provide a customized-from-the-factory look - Dealers will start taking orders for Hellcat stripes in January 2016 - SRT Hellcat dual stripes have a U.S. Manufacturer's Suggested Retail Price of $995 - Dodge is answering enthusiast demand for Plum Crazy exterior paint with an additional one-month run of the legendary and limited-edition high-impact hue January 8, 2016 , Auburn Hills, Mich. - For more than a year, Dodge Challenger and Charger SRT Hellcat models — the fastest and most powerful muscle cars ever with 707 supercharged HEMI® horsepower each — have stormed roadways and drag strips with acceleration blasts to 60 mph in the low 3-second range, generated more than 61 million sensational YouTube video views around the globe, enabled an entirely new generation of Dodge enthusiasts and now for 2016 have been rewarded with their very own Dodge performance stripes.

Dodge Scat Pack for 5.7L Hemi V8 detailed, priced

Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.