Dodge Warlock on 2040-cars

Auto blog

2018 Dodge Challenger SRT Demon First Drive | Don’t fear the Demon

"If you're not hurt, we'll be really pissed. If you are hurt, we'll still be pissed, but not quite as pissed." These are the words from Jim Wilder, the vehicle development manager of the 2018 Dodge Challenger SRT Demon, that echo through our head as we slide behind the wheel of the car for the first time. He was warning us about driving beyond our abilities, and keeping the car out of the wall. With 840 horsepower and 770 pound-feet of torque on tap from its supercharged, 6.7-liter V8, the Demon does 0-60 miles per hour in 2.3 seconds, and 0-30 mph in a second flat. If something does go wrong, it'll happen quickly. Following that talk, we had our guts sloshed as a passenger in a blurry eighth-mile run, giving us a taste of the G forces (the Demon can pull 1.8 G in a straight line) we'd feel when we got in the driver's seat for our own pass down the drag strip. We're already sweating. It had rained - you could describe it as torrential - the day before. The grassy parking areas surrounding Lucas Oil Raceway were still flooded, but any water on the pavement had evaporated and hung in the air. Combined with the heat, we were sticky and uncomfortable. In Drag Mode, the Dodge Demon's air conditioning turns off. Any condensation that it could leave on the track would be a problem, plus we need to reduce parasitic power losses for a faster run. The system is still working, though, the refrigerant diverted to the chiller system cooling the air coming into the engine. There's still condensation, but the Demon collects it on a catch pad to keep it from ending up on the pavement. We're also required to roll the windows up when entering the drag strip. For one thing, it helps keep the smoke out of the cabin during the pre-staging burnout. So, yeah, it's hot as Hell in the Demon. We pull through the water box and run through the sequence – which involves holding the "OK" button on the steering wheel usually used to navigate menus, and applying a specific amount of brake pressure before getting on the throttle to initiate the burnout. This gets any crud off the rear tires and heats up the rubber. There are multiple ways to launch the Demon. We had an instructor sitting in the passenger seat as we pulled up to the beams that trigger the Christmas tree at Lucas Oil Raceway. He walks us through the most complicated of the three he had explained to us just minutes before when we were in the passenger seat.

FCA plants skipping summer shutdown to keep up with demand

Hopefully, some FCA US factory employees don't have big plans for the usual summer shutdown, because the automaker is keeping several plants running this year. Demand is so high that the company wants to keep models rolling off the assembly lines. Four FCA US assembly plants, all the engine factories, and some locations that build transmissions are staying open throughout the summer, according to the Detroit Free Press. Usually, these sites would see a two-week shutdown for the company to retool and perform repairs. This year, factories are staying open for FCA to support its strong sales. The lines that remaining humming through the summer show an inclination toward the automaker's popular SUV's and crossovers. They include the Jefferson North Assembly Plant in Michigan that builds the Jeep Grand Cherokee and Dodge Durango; Saltillo Van Assembly in Mexico that constructs the Ram ProMaster; Toledo Assembly Complex in Ohio that produces the Cherokee and Wrangler; and Toluca Assembly in Mexico that makes the Dodge Journey and Fiat 500. Related Video: News Source: The Detroit Free PressImage Credit: Bill Pugliano / Getty Images Plants/Manufacturing Dodge Fiat Jeep RAM FCA dodge journey fca us ram promaster Jefferson North Assembly Plant

Some dealers asking $100,000-plus for Daytona-edition Dodge Charger SRT Hellcats

If you thought the name of the 2020 Dodge Charger SRT Hellcat Widebody Daytona 50th Anniversary Edition was a lot to swallow, then you're definitely going to choke on what some dealers are asking for the privilege of owning one. The $4,495 package is commanding as much as $25,000 in "market adjustments" from stores looking to capitalize on the rarity of this extremely limited-edition model.  The folks over at Moparinsiders.com reported Friday that some dealers are asking Demon-level prices for their limited allocations of the commemorative package. Their assessment? Not worth it. We're inclined to agree.  The Daytona 50th Anniversary Edition package is, fundamentally at least, little more than a set of stickers, a dash plaque and a tiny bump in horsepower. What you really get for your money is exclusivity. Only 501 were built (to commemorate the number of production units required to homologate the original Charger Daytona for NASCAR racing); just 451 went to U.S. dealers. The other 50 were reserved for Canada.  To be fair, no variant of the 2020 Charger SRT Hellcat Widebody even approaches the definition of "inexpensive." Just to get behind the wheel of the newest edition to the Charger lineup will set you back at least $71,000. The Widebody package is more than just a set of custom fenders. The Hellcat also gets another 1.6 inches of track width and some extra rubber on the road. SRT engineers also increased the Hellcat’s front spring rate by 32% and beefed up its sway bars (from 19 mm to 21.7 mm in the front and from 32 mm to 34 mm in the rear). The adaptive suspension was firmed up a little bit across the board too for crisper response over road imperfections. Plus, you know, there's that 707-horsepower, supercharged, 6.2-liter engine. The Daytona gets an extra 10 ponies, right? Well, sort of, anyway. SRT rated its output at a slightly higher engine speed. Between us, it's the same thing.  So, there's a silver lining: You don't have to spend $100,000 for a 2020 Charger Widebody Hellcat if you don't want to, but somebody probably will.  Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.