2005 Srt-10 Dodge Viper Truck on 2040-cars

Auto blog

Chrysler minivans under investigation for stalling after fuel refill

According to the National Highway Traffic Safety Administration, at least one man has reported that his 2007 Dodge Grand Caravan stalled unexpectedly on the highway shortly after being refueled. The unidentified man who contacted NHTSA regarding the issue cited as many as eight similar instances reported by other drivers.
NHTSA has announced that it will launch an inquiry into this issue, which could affect as many as 160,000 minivans from Dodge and Chrysler that were sold in 2007 (or more, if a problem is found that extends to additional models years, we'd assume). As of yet, there's no formal investigation, let alone a recall, on these vans, as the agency is merely determining if further action is needed.
Two months ago, Chrysler recalled nearly 700,000 vehicles, the majority of which were minivans, from the 2008-2010 model years to replace ignition switches after an investigation found that their weak springs and detent positions could fool a driver into thinking the car was in the "Run" position, when it's actually in the "Accessory" position.

Values snowball for legendary Tucker Sno-Cats, latest toys of the super rich

Here's a fun-sounding vehicle perfect for the cold and snow that's currently gripping much of North America. Tucker — no, not that Tucker — just marked its 75th anniversary making the Sno-Cat, its orange-painted, four-tread snow vehicles that have inspired backcountry skiers, collectors — and increasingly, the super rich. Bloomberg in a recent story writes that demand for the Medford, Ore.-based company's products is soaring on demand from the wealthy, who need a way to get to their backcountry mountain retreats. They're also in demand from collectors and gearheads who also love snow, like two anonymous collectors who are believed to have amassed more than 200 vintage Sno-Cats. The value of vintage models has reportedly tripled in the past five years to well over $100,000 for a fully restored rig. Tucker Sno-Cat Corp. claims to be the world's oldest surviving snow vehicle manufacturer, launched by E.M. Tucker in 1942 out of a desire to design a vehicle for traveling over the kind of deep, soft snow found in the Rogue River Valley of his childhood. It was four Tucker Sno-Cat machines that helped English explorer Vivian Fuchs and his 12-man party make the first 2,158-mile overland crossing of Antarctica in 1957-58. While many of the company's competitors either shuttered or adapted to serving ski resorts with wider, heavier treads, Tucker has stuck to its formula of making lightweight vehicles to travel over deep snow. Many Tuckers use Chrysler's flat six-cylinder engine, or its Dodge Hemi V8 for larger Sno-Cats, mounted rear or centrally, with basic, no-frills aluminum cabins. Sno-Cats all have four articulating tracks that are independently sprung, powered and pivoted at the drive axle. Track options come in three different types: conventional steel grouser belt track, rubber-coated aluminum grouser belt track, and one-piece all-rubber track. Steering is hydraulically controlled by pivoting the front and rear axles for smooth movement over undulating terrain with minimal disturbance of the ground cover. The company today makes 75 to 100 Sno-Cats a year for customers including the U.S. military, oil-drilling crews in cold places like Alaska and North Dakota, and utilities. But demand is so high that it's launched a profitable service reselling and refurbishing old machines. E.M. Tucker's grandson, Jeff McNeil, now head of this division, scours Google Earth for abandoned Sno-Cats rusting in backyards that he might be able to acquire and fix up.

How to tune a car right: Part 3, tuning Mopar with OST Dyno

Not long ago, I wrote a story about a pony car tuned with a supercharger. The blower install had been done properly. Then the car's owner bolted on a set of great looking wheels wrapped in good looking but inexpensive rubber. On my first test drive, I couldn't get any of that supercharged sweetness to the ground. It was the perfect ride for parking in a Burger King parking lot on a Friday night. I tooled around on a Sunday drive, shaking my head that someone had spent five figures to get more power the right way, with a clean install, then wiped out the gains so thoroughly that the stock engine would likely have overwhelmed the tires. This got me thinking about the ways people ruin their quest for horsepower, either on the front end by not insisting on a clean install and paying the money for it, or on the back end with supplemental purchases like cheap tires or cheap gas. So I called three tuners, one focused on GM, one on Mopar, one on Ford, to find out what people should know about how to get the best power for their goals, and how to make sure they are able to use all that power. The first interview in this three-part series was with Blake Leonard at Top Speed Cincy in Cincinnati, Ohio, the second with Brandon Alsept at BA Motorsports in Milford, Ohio. This third and last interview is with Micah Doban at OST Dyno in Slippery Rock, Pennsylvania, a family business with more than 40 years of Mopar expertise specializing in Gen III Hemis, but tuning everything from land-speed cars and drag racers to Jeeps The interview has been edited for clarity and concision. Do people who come to OST generally know what they want? Probably 80% of the people who come in simply want more power with no particular ET goal [ET is a kind of bracket handicapped drag racing – ed.]. WhatÂ’s the best way to start a Mopar tune? The first thing is what people often skip, and that's to find a tuner or a shop. People will throw parts on their cars that the Internet said to, then go to a tuner who does things a different way, and [the tuner is] like ‘No we don't like to use these injectors, we don't like these parts.Â’ You have to find someone familiar with the parts that are on your car or that you're planning to put on your car. So having a goal and then finding a tuner who can help you with that goal is proper way to start. Exactly. And a lot of tuners have their own formula – and when I say tuner I mean someone that also does work to the cars.