1990 D-350 Cummins 12v 5 Speed Diesel 120k Miles 4x4 1st Gen Wrecker Tow Nice ! on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

2015 Dodge Challenger Drag Pak previewed

Dodge and Mopar have never strayed far from success in drag racing, be it on run-what-you-brung nights at the local strip or at the highest levels of the sport. Hoping to both add to that heritage and capitalize on some of the media spotlight that's shown so brightly on the brand of late, Dodge has given us our first look at the 2015 Mopar Challenger Drag Pak test car.
Though this first iteration doesn't make use of the 707-horsepower Hellcat engine, it seems to be a pretty formidable racing package. Starting with a stock '15 Challenger, Mopar adds a full roll cage built to National Hot Rod Association specs. Rubber front and back is drag racing-ready as well, with 28x4.5-inch tires in the front, and fat 30x9-inch tires out back - all from Hoosier.
Powering the beast is a massive 426-cubic-inch (7.0-liter) Hemi Race V8, with output levels that are still unspecified. A Chrysler 727 automatic transmission connects up to a racing style shift lever, with integral line lock.

Want a new 2017 Viper? You'd better call Gerry Wood Dodge

As unfortunate as the news may be, the Dodge Viper is entering its final year of production. Slow sales and increased safety regulations have finally killed Dodge's big, brutish, and beautiful supercar. It will be missed. According to Motor Authority, those looking to pick up one of the last remaining models will have to travel to Gerry Wood Dodge in Salisbury, North Carolina. The dealer has apparently managed to secure the final allocation of cars for itself. All 135 or so remaining cars will be sold exclusively through Gerry Wood Dodge. While Dodge has already sold out of the limited-edition 2017 models, Gerry Wood Dodge put a team together to research and create their own unofficial limited-edition cars. These will be ordered in specific and unique color and option combinations. Dodge offers more than 8,000 colors for the Viper, so picking out a few unused shades couldn't have been too difficult. While these aren't official, it should provide some bragging rights to owners who manage to secure one of the special cars. Despite the exclusivity and hoarding the final few vehicles, Gerry Wood Dodge doesn't plan to add a dealer markup to the car. They claim to never markup cars over MSRP, which seems good for everyone but them. We won't complain. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery 2016 Dodge Viper ACR: First Drive View 26 Photos News Source: Motor AuthorityImage Credit: Copyright 2016 Michael Austin / AOL Dodge Car Dealers Coupe Performance