1987 Dodge Ramcharger 4x4 on 2040-cars

Auto blog

Dodge adds fire-breathing Durango SRT for 2018

The playbook for Dodge right now is pretty simple. Wring as much power out of as many things as humanly possible. Now comes the 2018 Dodge Durango SRT. Packing 475 horsepower and 470 pound-feet of torque, this seven-seat school bus will scoot to 60 miles per hour in just 4.4 seconds. Since the latest Durango launched for 2014, Dodge has unabashedly called it a three-row Charger. This beefy SUV makes that aggressive claim even more legit. "It does all the things we want a performance car to do," says Mark Trostle, head of performance, passenger, and utility vehicle exterior design. "It really is our three-row Charger." The 6.4-liter (392 cubic inches) Hemi V8 is considerably stronger than the already-potent 5.7-liter Hemi V8, which is rated at 360 hp and 390 lb-ft in the most powerful Durango available now. The SRT powertrain includes the TorqueFlight eight-speed automatic transmission used in the lesser Durango models (and many other FCA US vehicles), though it's calibrated specifically to the sportier demeanor of the SRT model. A similarly retuned full-time all-wheel-drive system rounds out the powertrain. Despite the fact this is a hot-rod SUV, it can still tow 8,600 pounds with a trailer, 1,200 pounds more than the most capable 2017 Durango (the rear-wheel 5.7-liter variant). View 9 Photos The Durango SRT is an obvious move for Dodge. The Jeep Grand Cherokee, which is built on the same platform in the same factory in Detroit, already has an SRT model. With rumors of a Hellcat-powered Grand Cherokee swirling and another Demonic Challenger on the way, the Durango was overdue for an engine upgrade. "When we launched the Durango in 2014, this is the one we really wanted," says Tim Kuniskis, head of FCA US' passenger car brands. There's no doubt this is an enthusiast-oriented SUV. Dodge even went to the trouble of certifying the Durango SRT's 12.9-second quarter-mile time with the NHRA and tested it a Virginia International Raceway. Buy a Durango SRT, and you get a full day at the Bob Bondurant School of High Performance Driving. When's the last time anyone did all of that with a three-row ute? It certainly looks the part. The hood bulges with new air-ducts to help keep the big Hemi chilled appropriately. There's a new front fascia with more air vents and LED fog lamps. Plus, the grille takes on a menacing new glare with a mesh pattern, and the body gets wider wheel flares. Click through the gallery, it really does look like a Charger from some angles.

Dodge could enter Peugeot's Le Mans-bound 9x8 hypercar in IMSA races

Fiat-Chrysler Automobiles (FCA) and PSA Group merged under the Stellantis umbrella in early 2021 to achieve economies of scale, and this benefit could surprisingly extend to racing. Executives are debating whether to give Dodge its own version of Peugeot's recently-unveiled 9x8 hypercar to race in America, according to a recent report. "While we only heard [the new rules] confirmed a week ago, it has certainly led to some very open discussion, not only about whether Peugeot might add races in the United States, but also about whether the spine of this car might have opportunities with other brands in the Stellantis Group. There are no conclusions yet, but there are now open discussions," affirmed Jean-Marc Finot, the Senior Vice President of Stellantis, in an interview with Racer. His comments refer to an agreement signed in July 2021 by the Automobile Club de l'Ouest (ACO), the Federation Internationale de l'Automobile (FIA), and the International Motor Sports Association (IMSA). They chose to align their technical regulations to let manufacturers compete in different events on both sides of the pond without going through the resource-consuming process of developing a specific car for each series. As of writing, the Le Mans Hypercar (LMH) and Le Mans Daytona h (LMDh) categories fall under the newly-announced common set of rules. On the surface, this means Peugeot could enter its 9X8 (pictured) in the WeatherTech SportsCar Championship as soon as the 2023 season. While this is seemingly under consideration, Peugeot has little to gain from winning a major race in the United States. It hasn't sold cars here since 1991, and its long-mooted comeback was canned after PSA merged with FCA. Giving a variant of the 9X8 to Dodge is a more credible possibility, according to Racer. If not Dodge, then who else? Chrysler hasn't been linked to racing or performance for decades. Jeep is no stranger to performance vehicles, but IMSA would be pushing it. Ram is Ram, while Fiat, Alfa Romeo, and Maserati are rooted in Europe. The rest of the Stellantis brands (like Opel, Lancia, and Citroen) are not distributed in America. Nothing is official, and the publication stressed it's unclear whether Dodge will commit part- or full-time to the series (assuming the program receives the green light). Finot underlined the parallel car would use the 9X8's "spine," so don't expect to see a Peugeot hypercar with a Dodge emblem driving flat-out on the Sebring International Raceway.

FCA and UAW deal could mean huge production shakeups

The big labor contract between Fiat Chrysler Automobiles and the United Auto Workers is likely to lead to some very serious production shakeups across the company's North American manufacturing operations. That's according to a new report from Automotive News, which details the sweeping changes at no fewer than five production facilities in Michigan, Illinois, Ohio, Mexico, and Poland. So without further ado, here's what's going where, presented in easy to digest bullet form. Ram 1500 production would move from Warren, MI to Sterling Heights, MI Warren, MI would be retooled for unibody production and would handle the Jeep Grand Wagoneer and could potentially build Grand Cherokees to ease the strain on Detroit's Jefferson North factory Chrysler 200 production would move from Sterling Heights, MI to Toluca, Mexico Dodge Dart production would move from Belvidere, IL to Toluca, Mexic Fiat 500 production, which is currently handled by Toluca, would be concentrated in Poland, where the Euro-spec Cinquecento is built Jeep Cherokee production would move from Toledo, OH to Belvidere, IL to make room for Wrangler and Wrangler Pickup production Like we said, those are some big changes. But, as FCA CEO Sergio Marchionne said in an earlier interview with Automotive News, this kind of shakeup would make a lot of sense. In that August interview the exec said that automakers moved truck production to Mexico because they were "threatened" by the UAW. "The only thing [the UAW] want is to move the truck back. Which is right. If you move the truck back here, which is [the UAW's] domain, [and move] all the cars that we get killed on somewhere else, we could actually make sense of this bloody industry and actually increase the number of people employed in this country and really share wealth because we are making money," Marchionne told AN. News Source: Automotive News - sub. req.Image Credit: Bill Pugliano / Getty Images Plants/Manufacturing UAW/Unions Chrysler Dodge Fiat Jeep RAM Sergio Marchionne FCA toluca warren sterling heights