1965 Dodge A100 5 Window Compact Pickup - Original V8 Truck!!! on 2040-cars

Auto blog

VLF Force 1 V10 is a rebodied Viper priced like a Lamborghini

It would appear that Henrik Fisker is done with hybrids. His latest project, called the Force 1, packs an oversized V10 engine with no electric assist in sight and all the environmental credentials of a herd of flatulent cattle. Alongside the Karma-based, Corvette-powered Destino, the Force 1 is the second product from VLF Automotive. Fisker has taken partnership in the new firm as chief designer alongside chairman Bob Lutz and CEO Gilbert Villarreal. The company isn't saying explicitly what the Force 1 is based on, but it doesn't take a CSI team to trace its roots back to the Dodge Viper. Never mind that it's being built in Auburn Hills – the same Detroit suburb where Chrysler is headquartered – or that it was jointly developed by Fisker and professional Viper racer and dealer Ben Keating. It also happens to be powered by an 8.4-liter V10, and there aren't many of those kicking around the industry. Instead of the Viper's 645 horsepower and 600 pound-feet of torque, the Force 1's ten-cylinder engine is optimized to deliver 745 hp and 638 lb-ft. That, according to VLF, is enough to send the coupe rocketing to 60 in 3.0 seconds flat, covering the quarter-mile in under 11 seconds on its way to a top speed of 218 miles per hour. The power is transmitted to the Pirelli PZero rubber through a six-speed manual, but VLF says it will fit it with an automatic at the customer's request. Around that massive engine and two-seat cockpit, Fisker designed a new shape that, for better or for worse, looks way more aggressive than the Viper's. The Force 1's proportions are tellingly super-snake, but the curves are replaced by some very angry-looking angles and vents. Its head- and taillights are ultra thin, and the deep-dish, split-four-spoke wheels seem to visually split the difference between the three-spoke wheels on the original Viper and the five-spoke alloys it wears today. If you doubted the Force 1's origins before, the interior ought to give it away, with its wide tunnel and familiar surfaces. Only VLF has refinished it in leather, suede, and Alcantara, all diamond stitched with contrasting thread to help position this as a more luxurious prospect than the Dodge. It even fit between the seatbacks place for two champagne bottles that we hope nobody would consider consuming before trying to handle that much power. Of course, none of this will come cheap.

Chrysler Recalls Over 566,000 Trucks, SUVs

Fiat Chrysler is recalling more than 566,000 trucks and SUVs in two recalls for malfunctioning fuel heaters that can cause fires and a software glitch can disable the electronic stability control. The recalls bring the newly merged company's total for the year to 6.4 million vehicles worldwide and 5.1 million in the U.S. as it continues to struggle with reliability problems. It was not immediately clear whether those totals were annual records. On Tuesday, its longtime quality chief abruptly left after Fiat Chrysler performed poorly in Consumer Reports magazine's annual reliability rankings. The largest of two recalls announced Wednesday covers almost 382,000 Ram 2500 and 3500 pickups and Ram 4500 and 5500 chassis cabs from 2010 through 2014. In trucks with 6.7-Liter Cummins diesel engines, corrosion on a fuel heater terminal could cause overheating, fuel leaks and fires. Chrysler is not aware of any fires or injuries. Owners could be warned by an odor of diesel fuel. Customers will be notified by letters starting in December. Dealers will install upgraded terminals and fuel heater housings could be replaced. The second recall covers more than 184,000 Jeep Grand Cherokee and Dodge Durango SUVs from 2014. A debris cover over a circuit board in the steering column control module can disrupt communications and disable the stability control. The problem was discovered when dealers started getting reports from customers that electronic stability control warning lights were coming on. Fiat Chrysler says it knows of no crashes or injuries caused by the problem. Technicians will upgrade software to fix the SUVs, and customers will be notified in December. Fiat Chrysler has issued 33 global recalls and 27 in the U.S. so far this year. Doug Betts, its longtime quality chief, left the company to pursue other options after Consumer Reports' survey-based rankings this year showed four FiatChrysler brands at the bottom of its list. Dodge, Ram, Jeep and Fiat performed worst of 28 brands ranked by the magazine. Company spokesman Eric Mayne said Fiat Chrysler's recalls average fewer than 200,000 vehicles each, below the industry average of 301,000. That means the company is responding quickly to problems, he said, adding that eight of its 27 U.S. recalls were announced before the company received any consumer complaints. Chrysler is not alone with a high number of recalls so far this year.

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric