07 Silver 4.0l V6 Automatic Bluetooth Navigation Satellite Radio Keyless Entry on 2040-cars

Auto blog

Dodge Durango could get eTorque mild hybrid system in 2020

The 2020 Dodge Durango appears slated to get a mild-hybrid powertrain option. That's the word from moparinsiders.com, which unearthed the news from documents relating to contract negotiation between the FCA and the UAW. Although the documents give no further details, it's a pretty safe bet that we're talking about Chrysler's eTorque mild-hybrid system, which was introduced on the Ram 1500 pickup and has since been extended to the Jeep Wrangler. Currently, the Wrangler offers the eTorque system on the 2.0-liter inline-four and the 3.6-liter Pentastar V6, both on the Sahara model only, while the Ram 1500 makes the mild-hybrid system standard with the 3.6-liter V6 and an option with the 5.7-liter Hemi V8. The V6 eTorque powertrain makes 305 horsepower and 269 pound-feet of torque (Ram) or 285 horsepower and 260 pound-feet (Wrangler). The Wrangler's four-cylinder eTorque is good for 270 horses and 295 lb-ft. The V8 version in the Ram is good for 395 horsepower and 410 lb-ft of torque. In all cases, the eTorque system does not increase peak output over the standard version of the gasoline engine. The mild-hybrid system does provide a minor fuel-economy boost. In the Wrangler, the 3.6-liter with eTorque has EPA city estimates that are 1 mpg better than without the system. On the Ram's V8, eTorque adds 2 mpg city and 1 mpg highway. (The 2.0-liter sees no improvement in its EPA ratings.) It's not known whether the Durango will add eTorque to its V6, or V8, or both. Either engine could do with a fuel-economy boost, as the V6 is EPA rated at 19/26 mpg city/highway (RWD) and 18/25 mpg (AWD), while the V8 version has estimates of 14/22 mpg. Related Video:

2018 Dodge Challenger SRT Demon First Drive | Don’t fear the Demon

"If you're not hurt, we'll be really pissed. If you are hurt, we'll still be pissed, but not quite as pissed." These are the words from Jim Wilder, the vehicle development manager of the 2018 Dodge Challenger SRT Demon, that echo through our head as we slide behind the wheel of the car for the first time. He was warning us about driving beyond our abilities, and keeping the car out of the wall. With 840 horsepower and 770 pound-feet of torque on tap from its supercharged, 6.7-liter V8, the Demon does 0-60 miles per hour in 2.3 seconds, and 0-30 mph in a second flat. If something does go wrong, it'll happen quickly. Following that talk, we had our guts sloshed as a passenger in a blurry eighth-mile run, giving us a taste of the G forces (the Demon can pull 1.8 G in a straight line) we'd feel when we got in the driver's seat for our own pass down the drag strip. We're already sweating. It had rained - you could describe it as torrential - the day before. The grassy parking areas surrounding Lucas Oil Raceway were still flooded, but any water on the pavement had evaporated and hung in the air. Combined with the heat, we were sticky and uncomfortable. In Drag Mode, the Dodge Demon's air conditioning turns off. Any condensation that it could leave on the track would be a problem, plus we need to reduce parasitic power losses for a faster run. The system is still working, though, the refrigerant diverted to the chiller system cooling the air coming into the engine. There's still condensation, but the Demon collects it on a catch pad to keep it from ending up on the pavement. We're also required to roll the windows up when entering the drag strip. For one thing, it helps keep the smoke out of the cabin during the pre-staging burnout. So, yeah, it's hot as Hell in the Demon. We pull through the water box and run through the sequence – which involves holding the "OK" button on the steering wheel usually used to navigate menus, and applying a specific amount of brake pressure before getting on the throttle to initiate the burnout. This gets any crud off the rear tires and heats up the rubber. There are multiple ways to launch the Demon. We had an instructor sitting in the passenger seat as we pulled up to the beams that trigger the Christmas tree at Lucas Oil Raceway. He walks us through the most complicated of the three he had explained to us just minutes before when we were in the passenger seat.

1970 Hemi Challenger is a family heirloom with serious muscle

Petrolicious turns up the emotion in its latest video about a family's connection to their 1970 Dodge Challenger. The orange muscle car that gets the spotlight here is a remarkably beautiful vehicle, but the story of a father and his sons at the core of this clip might leave you feeling a little misty eyed. Juan Escalante is the current owner of this Challenger, but it belonged to his dad first. Juan's father spotted the iconic muscle car during the 1969 Detroit Auto Show and had to have one. He soon placed an order for the orange '70 Challenger R/T with the rare combination for that year of a 426 Hemi V8 and a four-speed manual gearbox. The family even brought the coupe with them when they moved to Venezuela in 1972, and local fans dubbed it El Hemi. However, parts were scarce for the muscle car in that country, and it returned to the US in 1996 for a restoration. Now, the rumbling Challenger with its Coke-bottle profile and black hood is the world's most awesome family heirloom for the Escalantes. In this poignant video, Petrolicious shows how the coupe connects Juan to his father. Related Video: