2006 Dodge Magnum R/t Wagon 4-door 5.7l on 2040-cars

Auto blog

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.

Dongfeng and PSA extend Chinese joint venture

BEIJING/PARIS — China's Dongfeng and Peugeot maker PSA are extending their business cooperation, despite the Chinese company reducing its stake in PSA to help smooth the French carmaker's merger with Fiat Chrysler Automobiles (FCA). Dongfeng said on Thursday it had agreed with PSA to extend the duration of their joint venture Dongfeng Peugeot Citroen Automobiles (DPCA). Under the deal, the venture could get the rights to PSA's new brands in China and will benefit from new technologies and intellectual properties, the Chinese company said. PSA was not immediately available for comment. The announcement comes a day after the companies said Dongfeng would reduce its 12.2% stake in PSA by selling 30.7 million shares to the French company. Analysts said the move could smooth U.S. regulatory approval for PSA's roughly $50 billion (GBP38.97 billion) merger with Italian-American carmaker FCA. The sale of Dongfeng's shares in PSA, worth around 680 million euros ($757 million), will leave the Chinese group holding around 4.5% of the merged PSA-FCA, which is set to become the world's fourth-biggest carmaker by sales volumes. "As the cooperation between Dongfeng and PSA deepens, we expect the joint venture to continue making good progress in China," a Dongfeng representative said. On a conference call, Dongfeng said DPCA would have exclusive rights to PSA's Opel cars should the partners agree to bring the brand to China, and enjoy lower prices on car parts imported from PSA. Earlier this year, a document seen by Reuters showed Dongfeng and PSA plan to cut jobs at Wuhan-based DPCA and reduce its number of car plants to try to make the venture more profitable. Chrysler Dodge Fiat Jeep RAM Citroen Peugeot China FCA PSA Dongfeng

Junkyard Gem: 1991 Dodge Monaco LE

When Chrysler took over the American Motors Corporation in 1987, the hot-selling Jeep brand was the big prize of that deal. At a stroke, Iacocca's company got the XJ Cherokee (which remained in production into our current century) plus its Comanche pickup sibling, the Wrangler, the Grand Wagoneer, and the AMC Eagle as bonuses. The Eagle gave its name to Chrysler's new marque, which worked out well for quite a few years, and of course the PowerTech V8 engine began life as an AMC design. Yes, Chrysler made out like a bandit on the AMC purchase, but one of the most important acquisitions that came with that coup ended up being a Renault design from the last gasp of Kenosha: the Eagle Premier. Genetic material from this car made its way into Chrysler products for decades to come, and the Dodge Division got the opportunity to slap Monaco badges on the Premier for the 1990 through 1992 model years. Here's one of those super-rare cars in a Denver self-service yard. Dodge sold plenty of Detroit-designed Monacos from the 1965 through 1978 model years, and so the name seemed ripe for a revival in 1990. We rated the 1974 Dodge Monaco "Bluesmobile" #3 on the Best Movie Cars of All Time list, and Monacos may be found in countless cop movies and TV shows over the decades. Did the name belong on a Renault design? Absolutely! The radical-looking and big-selling Chrysler LH cars were built on a modified Eagle Premier chassis, enabling Chrysler to print money from a 1980s Renault design all the way through 2004. After that, Mercedes-Benz engineering (with a dash of Mitsubishi thrown in for good measure) got stirred into the mix, but I'm told by a Chrysler engineer that you can still see the Renault 25 structure beneath the dashboard in modern Challengers and Chargers. All of this comes thanks to Lee Iacocca's score of that advanced European car way back in 1987. One thing from the Premier that Chrysler dropped like a monkey dropping a red-hot penny once production of the Premier/Monaco ended: the PRV V6, a sophisticated-but-flaky overhead-cam V6 originally developed by a partnership between Peugeot, Renault, and Volvo (hence the acronym). This engine achieved its greatest fame as the powerplant that went into the DeLorean DMC-12. You could get the chugging AMC 2.5-liter straight-four in the Eagle Premier, but all the 1990-1992 Monacos got the 3.0-liter PRV, rated at 150 horsepower.