2014 Dodge Journey Sxt on 2040-cars

Auto blog

2015 Dodge Viper price drops $15k for 2015

We recently saw updated specs and new trims of the 2015 Viper, but it looks like the folks at Dodge were saving the biggest surprise for last. Prices on all levels of the American sports car are seeing an immediate, across-the-board price cut of $15,000; even 2014 models still remaining on dealer lots.
The new MSRP for the 2015 Viper in its base SRT trim now starts at $84,995, and when the TA and GTS come to the lineup later next year, they start at $100,995 and $107,995, respectively. The move seems like a swing for the fences that might help to quell slow sales.
Obviously, current Viper owners might be somewhat peeved that their investment was just re-priced by the company. However, to assuage some of their concerns, Dodge is giving all fifth-gen owners a certificate worth $15,000 towards the purchase of a new one, which comes in addition to the price reduction.

A look at the Dodge Demon's drag settings, modes, and go-fast tech

In the same video that gave us a peek at the 2018 Dodge Challenger SRT Demon's performance stats, there's a serious dump of info on the tech and tools that will likely help this muscle coupe slaughter drag strips. Dodge has outlined a few of them for us and we're using the power of inference to figure out the rest. Here's what we've gathered. A lot of these hints come from the Demon's version of Performance Pages, the infotainment screens that show what SRT models are doing and let the driver change the powertrain and chassis setup. There are a lot of Demon-only features, including line lock, a quick cooldown mode for the supercharged engine, and data recording. And of course there are pages to show a digital time slip with acceleration and braking figures, a g-load plot, and lots of gauges to track temps and levels. The engine output is shown in the video on a special Dyno page. It tracks horsepower and torque over time on the upper graph, and engine rpm and shift points on the lower graph. And we think it's still hiding something. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Any good drag car has a line lock, allowing the driver to lock the front brakes and leave the rears free to do a nice tire-warming (or tire-shredding, depending on length) burnout. Ford has it on the Mustang, Chevy puts it on the ZL1, and now Dodge is adding it to the Demon. It should help get the giant Nitto tires up to temp for a drag run. And once the tires are warm, there's launch control, just like on the SRT Hellcat, with selectable rpm to dial things in for the conditions. The Demon also has a shift light in the cluster, and the driver can set a shift point individually for each gear. After each drag run, you can activate Quick Cooldown, which Dodge says uses the first production application of After-Run Chiller – it runs the cooling fan and intercooler coolant pump with the engine off until the coolant reaches its target temp. It's shown in one of the slides above. The checklist on the left side of that page suggests it requires a set of conditions be met to work: engine off, hood open, and sufficient battery level. This further reinforces our theory that the supercharger is going to make big boost, beyond the Hellcat's 11.6 psi. And while you're waiting for the supercharger to cool off for another run, you can review the performance data the car records.

2018 Dodge Demon comes with a factory tune for race gas

We knew the Dodge Demon was going to make a lot of power, but the ongoing question has been how much. We've seen estimates of between 757 and 1,121, but those have simply been guesses based on the numbers found in promo photos. However, if we had to put our bets on a horsepower rating, we'll probably go with the higher estimates because the Demon can run on race gas. Yes, the latest teaser for the Demon reveals that it will come with a factory tune optimized for race gas, which is rated at 100 octane or higher. Running such high octane, in combination with its heavy-duty intake cooling, means the Demon can handle absurd amounts of boost and advanced timing without running the risk of dangerous pre-ignition or detonation. Of course this also means the Demon should be capable of astonishing power with the high-octane calibration. The tune will be included in the Demon crate on a separate engine computer that the owner can swap out when he or she is ready to race. In addition to the computer, the center stack also has a button to activate the high-octane mode. A pair of fuel pumps and larger injectors also ensure the engine gets plenty of that sweet racing fuel. When not running the high-octane tune, the Demon runs on your average premium gasoline. Also, in case you accidentally run premium gas with the high-octane mode activated, the car will automatically switch to the default tune if engine knock is detected. You can get a peek at the system in the video above, and be on the lookout for a bonus video tomorrow. The full reveal will be next week on April 11 at the New York auto show. Related Video: