2014 Dodge Journey Sxt on 2040-cars

Auto blog

Dodge Grand Caravan to live in fleets through 2017

After a hard-working career of hauling around families for decades, the Dodge Grand Caravan name was set to retire in 2016 under FCA's five-year plan for the US. The decision would have put all of the automaker's focus behind the next-generation Chrysler Town & Country, but that original strategy might have changed. Now, Dodge's minivan may have to work just a few more years before it can finally shuffle off. There are set to be 2016 and 2017 model year examples of the current Grand Caravan, according to an internal FCA production document obtained by Automotive News. This report suggests no changes in the minivan between those two years, and there's no mention of the company's intentions deeper into the future. "While we've announced the Grand Caravan will eventually be the minivan that goes away, we're not going into more detail at this time," a Dodge spokesperson said to AN. For the next Town & Country, production would start in Windsor, Ontario, in late February 2016. This document also suggests a brief run of 2016 Chrysler minivans based on the current model from August 2015 until February 2016. Automotive News speculates that the reprieve for the Grand Caravan could allow that model to focus on fleets and the Canadian market while the new Town and Country gets up and running. The latest generation T&C will reportedly debut at the 2016 Detroit Auto Show and will possibly carry a higher price to befit a vehicle with a more modern platform and improved tech.

Dodge engineers trying to shoehorn Pentastar into Dart?

The fact that the Dart's launch has been a pretty dismal affair isn't what we'd call secret. Judging by its mounting inventories and poor critical reception, Dodge's successor to its unloved Caliber has struggled since it hit the market. And while both of those are difficult problems to address, at least their cause is well known - the powertrain.
Even Fiat-Chrysler CEO Sergio Marchionne has acknowledged that the powertrain options in the Dart are substandard, admitting at January's Detroit Auto Show that the powertrains are "less than ideal." Leading with the 1.4-liter turbocharged four-cylinder found in the Fiat 500 Abarth left a bad taste in the mouths of consumers thanks to the laggy engine and dead throttle response (to say nothing of the manual and dual-clutch gearboxes that needed more refinement). The addition of the 184-horsepower 2.4-liter Tigershark in the Dart GT has helped matters some, but apparently Auburn Hills doesn't think it's quite enough.
If rumors are to be believed - get that salt ready - a possible solution may be in the works. A report from Allpar is claiming that Dodge is considering fitting a Pentastar V6 into the Dart's engine bay. As the Mopar-obsessed website points out, the critically acclaimed Pentastar is available in three different sizes - 3.0 liters, 3.2 liters and the original 3.6 liters. We don't get the 3.0 here in the US, but the 3.2 can be found in the new Jeep Cherokee and the 3.6 has been seemingly fitted to every model Chrysler can shoehorn it into.

Dodge Challenger ACR rumored finally on its way using Viper ACR as benchmark

In 1995, Dodge released the ACR Neon, an unlikely combination of cheap, compact American sedan and high-performance parts and engineering marked by initials standing for American Club Racer. Dodge sold a heap of them, so the automaker flexed the ACR brand's potential with the first ACR Viper in 1999. The racy coupes made huge noise for Dodge and the Viper. After the fourth-gen Viper ended production in 2010, Dodge took a Challenger ACR concept to SEMA in 2011. But instead of carrying the coupe to production, Dodge resurrected the Viper for 2013 and got one more Viper ACR model out during the last Viper's final years. With the Viper gone again, it appears Dodge is sorting out that Challenger ACR concept for real. Last October, Mopar Insiders reported the automaker was trying to get a Challenger ACR prepared for the model's 50th anniversary this year. The timing looks highly unlikely, but an Allpar source says the track-happy coupe is still coming, and with bonkers expectations and gear. We're talking about a big-boi widebody Challenger tuned to do hard laps, fast, around twisty circuits, all day long. An Allpar insider known as "Muther," a code name to tug at John le Carre's heart, said Dodge is considering two engines. Because the point of the car is to be raced and some series don't accept forced induction, one trim would fit the naturally aspirated 392 Hemi from the R/T Scat Pack. There's no telling if that motor would get a power bump, but the Challenger ACR concept upped its output slightly with measures like a cat-back exhaust. The other trim, naturally, would fit the 6.2-liter Hellcat Redeye V8.     Muther told Allpar that if engineers can get the car under 4,000 pounds, the math points to being within two seconds of the time set by the Viper ACR-E at Road America. That "E" represents the Extreme Aero Package, with addenda like a deeper front splitter, dive planes, and an adjustable, dual-element rear wing that helped the Viper ring up 14 lap records on U.S. tracks. The fastest time we know of for a Viper at Road America is from 2011, factory race driver Kuno Wittmer doing 2:20 even in a Gen IV Viper ACR. Wittmer's ride weighed 3,408-pounds. Dodge boffins want to get the Challenger ACR under 4,000 pounds. Achieving the weight goal would mean cutting at least 387 pounds from a standard R/T Scat Pack Widebody, and 512 pounds from the Hellcat Redeye Widebody if that trim has the same target.