2014 Dodge Journey Limited on 2040-cars

Auto blog

Hellcat motor 'fits like a glove' in the Wrangler and Gladiator, says Jeep

Just like "technically correct" is the best kind of correct, "technically possible" is the best kind of possible. Specifically, it's technically possible to slot a Hellcat crate motor into the Jeep Wrangler and Gladiator, as confirmed by Jeep brand chief Tim Kuniskis. Speaking to Australian media last week, Kuniskis went on to say that "everybody" keeps asking him if the supercharged, 6.2-liter Hellcat V8 fits in the Wrangler and Gladiator, and that the answer is yes. "It fits like a glove," said Kuniskis. But — there is a but — the fitment is so close for comfort, it makes the combination one that Jeep can never produce. "There's no air space around the engine [...] so you have no crush space, you have nothing that can be used to absorb energy in a crash. It's not a problem to put it in — other than emissions and fuel economy — except it would never pass any crash tests, and that's a problem," as Kuniskis told Drive. However, since the Hellcat is now out of the bag, it's probably only a matter of time until hobbyists with access to these engines will start putting them into Wranglers and Gladiators. And with the time-honored piece of advice — just don't crash into anything — it'd be a combination worth seeing and hearing. Just to throw it out there, a "Hellcrate" engine costs less than $20,000 new. Kuniskis also said that Jeep is "gauging interest" for the J6 concept, one of the Easter Jeep Safari concepts that were just revealed. "[The J6] is just a concept at this stage. But that doesn't mean we're not going to gauge interest for it." However, he said justifying its production is apparently "tough."

Takata airbag recall claims 209k Chrysler, Dodge vehicles

Chrysler is expanding the scope of its front passenger side Takata airbag inflator recall yet again to include 139,115 additional vehicles for a total of 208,783 units now needing these parts replaced. The latest campaign affects the passenger side inflators of the 2003-2005 Dodge Ram 1500, 2003-2005 Dodge Ram 2500, 2003-2005 Dodge Ram 3500, 2004-2005 Durango; 2005 Dakota pickup; 2005 Dodge Magnum and 2005 Chrysler 300 (pictured above), 300C and SRT8. It's limited to vehicles purchased or ever registered in Alabama, Florida, Georgia, Hawaii, Louisiana, Mississippi, Texas and the territories of American Samoa, Guam, Puerto Rico, Saipan and the US Virgin Islands. The company expects owners to be notified by February 8. The automaker just expanded the replacement campaign last week to include passenger side inflators in 149,150 pickups from the 2003 model year. However, the parts are not the same. Chrysler says this recall is for the PSPI family of components versus SPI for the last one. The company is also not aware of any injuries or accidents in its vehicles from these potentially faulty inflators, and lab testing of 600 of them finds no issues. Despite this, Chrysler is repairing these models at the request of the National Highway Traffic Safety Administration. Scroll down to read the company's full announcement of the initiative. Statement: Air-bag Inflator (Regional Field Action Expansion) December 12, 2014 , Auburn Hills, Mich. - Chrysler Group is expanding an ongoing regional field action with a recall to replace front passenger-side air-bag inflators in an estimated 208,783 older-model vehicles originally purchased or ever registered in seven U.S. states and five territories. The vehicles are equipped with front passenger-side air-bag inflators from a product family code-named "PSPI." Chrysler Group is unaware of any injuries or accidents involving PSPI inflators of the type covered by this campaign, nor has a Chrysler Group investigation identified a defect in these components. Further, laboratory tests on nearly 600 such inflators did not result in any failures. The inflators affected by this campaign differ in design and construction from PSPI inflators used by other auto makers. They also benefited from a more robust manufacturing process. However, at the request of the National Highway Traffic Safety Administration (NHTSA), Chrysler Group is expanding its replacement action beyond its original scope of Florida, Hawaii, Puerto Rico and the U.S.

Before Jay Leno, this 1970 Dodge Charger was a SEMA star

When Jay Leno drives an awesome car, enthusiasts take note, and this week the internet blew up over the 1970 Dodge Charger resto-mod that starred in a recent Garage episode. But you might not remember: this strapping Charger, called "Tantrum," was one of the highlights of the SEMA Show in Las Vegas last fall. Here's another look at a true Mopar monster. The power: Yep, Tantrum has 1,650 horsepower. That's more than two Hellcats worth of power under the hood. It's a twin-turbo 9.0-liter Mercury Racing engine with a quad-cam four-valve setup. Basically, it's a V8 boat motor developed for cars. Mercury Marine is the crew that developed the V8 for the 1990s Chevy Corvette ZR-1. That all-aluminum LT-5 under the hood cranked out 405 hp – an astronomical figure for the time – and helped make the ZR-1 an icon. Take a listen to Tantrum's 9.0-liter Mercury mill below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Who's behind all of this? SpeedKore, a Wisconsin-based performance shop that does one-off pro touring builds. It specializes in remaking Detroit muscle with modern features like carbon fiber, bespoke interiors, and powerful engines. SpeedKore is pretty good at it. Before it threw a Tantrum, it did the "Cudinator" used in some of the Fast and the Furious movies. You might not know: Tantrum won the Best Domestic category of the GT Awards at SEMA – chosen by your author. The sinister looks were the hook, and the crazy engine solidified its performance cred. Related Video: Image Credit: SpeedKore Design/Style Dodge Coupe Performance Videos Jay Lenos Garage 1970 dodge charger resto mod