2012 Dodge Journey Se/avp on 2040-cars

Auto blog

A look at the Dodge Demon's drag settings, modes, and go-fast tech

In the same video that gave us a peek at the 2018 Dodge Challenger SRT Demon's performance stats, there's a serious dump of info on the tech and tools that will likely help this muscle coupe slaughter drag strips. Dodge has outlined a few of them for us and we're using the power of inference to figure out the rest. Here's what we've gathered. A lot of these hints come from the Demon's version of Performance Pages, the infotainment screens that show what SRT models are doing and let the driver change the powertrain and chassis setup. There are a lot of Demon-only features, including line lock, a quick cooldown mode for the supercharged engine, and data recording. And of course there are pages to show a digital time slip with acceleration and braking figures, a g-load plot, and lots of gauges to track temps and levels. The engine output is shown in the video on a special Dyno page. It tracks horsepower and torque over time on the upper graph, and engine rpm and shift points on the lower graph. And we think it's still hiding something. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Any good drag car has a line lock, allowing the driver to lock the front brakes and leave the rears free to do a nice tire-warming (or tire-shredding, depending on length) burnout. Ford has it on the Mustang, Chevy puts it on the ZL1, and now Dodge is adding it to the Demon. It should help get the giant Nitto tires up to temp for a drag run. And once the tires are warm, there's launch control, just like on the SRT Hellcat, with selectable rpm to dial things in for the conditions. The Demon also has a shift light in the cluster, and the driver can set a shift point individually for each gear. After each drag run, you can activate Quick Cooldown, which Dodge says uses the first production application of After-Run Chiller – it runs the cooling fan and intercooler coolant pump with the engine off until the coolant reaches its target temp. It's shown in one of the slides above. The checklist on the left side of that page suggests it requires a set of conditions be met to work: engine off, hood open, and sufficient battery level. This further reinforces our theory that the supercharger is going to make big boost, beyond the Hellcat's 11.6 psi. And while you're waiting for the supercharger to cool off for another run, you can review the performance data the car records.

2020 Dodge Challenger SRT Super Stock is as close as you can get to a new Demon

Although the Dodge Demon was an exclusive, one-year-only muscle car, Dodge has found ways of getting bits of that car to more people. First there was the Hellcat Redeye, that got a detuned version of the Demon engine, down from 840 horsepower to 797. Now there's the 2020 Dodge Challenger SRT Super Stock. It starts with the Hellcat Redeye, but adds a bit of horsepower, and drag race-specific tires and suspension tuning to get one step closer to the monster Demon. The engine is basically the same supercharged 6.2-liter Hemi V8 as the Redeye, but with a new engine calibration that bumps up horsepower by 10 to 807, though torque stays the same at 707 pound-feet. It's coupled to the same eight-speed automatic as the Hellcat Redeye, but it has also been retuned to shift 100 rpm later at 6,400 rather than 6,300 to squeeze as much out of each gear as possible. The rear differential is a limited-slip unit and comes standard with a 3.09:1 gear ratio, which is optional on regular Hellcat Redeyes. The Super Stock also gets revised chassis components. Instead of the regular Hellcat Brembo six-piston brakes up front, it gets lighter four-piston Brembo calipers with slightly smaller rotors, all in the name of going faster at the drag strip. The suspension has been retuned to shift weight to the rear wheels and improve traction at launch. In Track mode, the suspension switches to fully firm rebound and compression at the rear, and firm compression and soft rebound at the front to help facilitate the weight transfer. It stays in this mode as long as full throttle is applied, and reverts to the standard Track settings when lifting off the throttle. The final piece of the drag racing puzzle are the wheels and tires. The regular Redeye's huge wheels and low profile tires are gone in favor of wheels that are just 18 inches in diameter. They're fitted with Nitto NT05R drag radials, the same make and model as on the Demon, at each corner for maximum traction at the strip. These are also the only indicators that you have a Super Stock. All the other badging is the same as the Hellcat Redeye, so only those in the know will recognize a Super Stock model. The final results of these drag-racing enhancements are impressive. Dodge claims a 0-60 time of 3.25 seconds, and a quarter-mile time of 10.5 seconds. Apparently it will finish three car lengths ahead of a regular Redeye at the drag strip. Top speed is less formidable at 168 mph, but that's a limit of the drag tires.

Ward's announces 10 Best Engines 2015

Ward's Auto has named its 10 Best Engines for 2015, covering a range of powerplants from fuel-sippers to fire-breathers. As with past years, forced-induction reigns supreme, with seven of the ten engines featuring a turbo or supercharger. This year is slightly different, though, as two of the seven blown engines are turbocharged three-cylinder mills, from the Ford Fiesta and Mini Cooper. They're joined by the 2.0-liter turbo four from the Volvo S60, the 1.8-liter turbo four from the Volkswagen Jetta and the 2.0-liter boxer from the Subaru WRX. BMW and Chrysler were the only marques to be named to this year's list twice, with the electric motor from the i3 joining the Mini's three-pot, and the 3.0-liter turbodiesel V6 in the Ram 1500 and Jeep Grand Cherokee repping the diesel crowd, alongside a certain supercharged monster. Hyundai also took a prize with a zero-emissions powertrain, with the Tucson FCV's 100-kilowatt fuel cell making the list (apparently Ward's is quite generous with what it deems an "engine"). Rounding out the list are two Autoblog favorites, each displacing 6.2 liters, but producing their power very differently. On the one hand, Chevrolet's overhead-valve, 455-horsepower V8, found in the Corvette, makes its power the old fashioned way. And in the other corner, we have one of the most exciting engines of the year – the 707-hp, 6.2-liter, supercharged Hellcat V8, featured so prominently in the Dodge Challenger and Charger SRT Hellcat. "We spend a lot of time reading the powertrain tea leaves throughout the auto industry, and we're proud that this year's list is a microcosm of all the latest innovation coming from automakers," said Ward's Editor-in-Chief Drew Winter in a statement. "It's not just a list for enthusiasts or for environmentalists," he says. "There's something for every vehicle shopper and every budget. All the powertrains on this list deliver a first-rate driving experience," Winter added. Scroll down for the full list from Ward's, and let us know which engines you think belong and which should have been included in this year's rankings. Ward's 10 Best Engines of 2015 Announced by Penton's WardsAuto Honorees span most diverse and technically advanced engines in 21 years of recognized powertrain excellence SOUTHFIELD, Mich., Dec. 10, 2014 /PRNewswire/ -- Penton's Wards 10 Best Engines of 2015 have been announced.