2004 Dodge Intrepid Se Sedan 4-door 2.7l on 2040-cars

Auto blog

Fiat Chrysler recalls 4.8 million U.S. vehicles for cruise control defect

WASHINGTON - Fiat Chrysler said on Friday it is recalling 4.8 million U.S. vehicles over a defect that could prevent drivers from deactivating cruise control and warned owners not to use the function until they get software upgrades. The Italian-American automaker said no injuries or crashes are related to the large recall campaign but said it had one report of a driver of a 2017 Dodge Journey rental car unable to deactivate the cruise control. Fiat Chrysler, which in 2015 was hit with penalties from U.S. regulators totaling $175 million for safety lapses, did not say how much the recalls would cost. The recall addresses what Fiat Chrysler called an "extremely rare" series of events that could lead to drivers being unable to cancel cruise control. The National Highway Traffic Safety Administration (NHTSA) said on Friday it "strongly encourages vehicle owners to follow a warning" to stop using cruise control on the recalled vehicles until repaired. NHTSA said drivers could overpower the system by forcefully applying the brakes until the vehicle stopped. Fiat Chrysler also said the vehicle could be stopped by shifting into neutral and braking. Fiat Chrysler shares fell more than 2 percent in premarket trading in New York on the recall. Fiat Chrysler noted that at times cruise control systems automatically initiate acceleration to help vehicles maintain driver-selected speeds, including when going up an incline. If an acceleration occurs simultaneously with a short-circuit in a specific electrical network, a driver could be unable to deactivate the function. Fiat Chrysler said vehicles may be placed in park once stopped, at which point cruise-control is canceled. The recall involves a group of gasoline-powered vehicles with automatic transmissions from various model years built from 2014 through the 2019 model year. Most of the vehicles being recalled cover the 2014-2018 model years. Among the vehicles being recalled are the Chrysler 200, Chrysler 300, Chrysler Pacifica, Dodge Charger, Dodge Challenger, Dodge Journey, Dodge Durango, Jeep Cherokee, Jeep Grand Cherokee, Jeep Wrangler and Ram 1500, 2500 and 3500 pickup trucks and Ram 3500/4500/5500 cab chassis trucks. Fiat Chrysler made the announcement going into the busy Memorial Day weekend, which traditionally kicks off the summer driving season.

VLF Force 1 V10 is a rebodied Viper priced like a Lamborghini

It would appear that Henrik Fisker is done with hybrids. His latest project, called the Force 1, packs an oversized V10 engine with no electric assist in sight and all the environmental credentials of a herd of flatulent cattle. Alongside the Karma-based, Corvette-powered Destino, the Force 1 is the second product from VLF Automotive. Fisker has taken partnership in the new firm as chief designer alongside chairman Bob Lutz and CEO Gilbert Villarreal. The company isn't saying explicitly what the Force 1 is based on, but it doesn't take a CSI team to trace its roots back to the Dodge Viper. Never mind that it's being built in Auburn Hills – the same Detroit suburb where Chrysler is headquartered – or that it was jointly developed by Fisker and professional Viper racer and dealer Ben Keating. It also happens to be powered by an 8.4-liter V10, and there aren't many of those kicking around the industry. Instead of the Viper's 645 horsepower and 600 pound-feet of torque, the Force 1's ten-cylinder engine is optimized to deliver 745 hp and 638 lb-ft. That, according to VLF, is enough to send the coupe rocketing to 60 in 3.0 seconds flat, covering the quarter-mile in under 11 seconds on its way to a top speed of 218 miles per hour. The power is transmitted to the Pirelli PZero rubber through a six-speed manual, but VLF says it will fit it with an automatic at the customer's request. Around that massive engine and two-seat cockpit, Fisker designed a new shape that, for better or for worse, looks way more aggressive than the Viper's. The Force 1's proportions are tellingly super-snake, but the curves are replaced by some very angry-looking angles and vents. Its head- and taillights are ultra thin, and the deep-dish, split-four-spoke wheels seem to visually split the difference between the three-spoke wheels on the original Viper and the five-spoke alloys it wears today. If you doubted the Force 1's origins before, the interior ought to give it away, with its wide tunnel and familiar surfaces. Only VLF has refinished it in leather, suede, and Alcantara, all diamond stitched with contrasting thread to help position this as a more luxurious prospect than the Dodge. It even fit between the seatbacks place for two champagne bottles that we hope nobody would consider consuming before trying to handle that much power. Of course, none of this will come cheap.

Stellantis previews 4 electric platforms: Here's how they'll be used

Stellantis EV Day is hitting hard and fast this morning, with big news coming from Dodge and Ram and Jeep and the rest. But to support those brand transformations, a core initiative within Stellantis will help it become a leader in electrification. To do that, the group is developing platforms and technologies with cross-shared components and systems. This starts with four flexible BEV platforms: STLA Small, STLA Medium, STLA Large and STLA Frame. As for targeted numbers, they’re lofty: By 2024, Stellantis aims for over 500 miles of range, 0-62 mph in 2 seconds and charging 200 miles of range in 10 minutes. The four platforms will offer battery capacities from 37 kWh to more than 200 kWh. More specifically, STLA Small will offer 37-82 kWh and up to 300 miles of range. STLA Medium will have 87-104 kWh and up to 440 miles. STLA Large will provide 101-118 kWh and up to 500 miles of range. The truck-focused STLA Frame will provide 159-200+ kWh and up to 500 miles of range (and will support an electric Ram 1500 pickup). Chrysler EV Front 34 View 8 Photos Stellantis has big plans for the STLA Large platform, and is currently developing eight vehicles for it in the next three to five years. Examples of possible vehicles shown include a midsize Ram truck and a Jeep off-roader that could fight against the likes of the Toyota 4Runner. Stellantis design boss Ralph Gilles could be seen in a presentation looking over a Chrysler electric crossover based on this platform. We also saw a Wagoneer badge teased momentarily. There was a rendered silhouette of a crossover that looked like it could compete with the Ford Mustang Mach-E. Gilles said the platform would allow Stellantis to “create a long-range luxury sedan, an all-conquering muscle car, a heart-of-the-market DUV, a heart-of-the-market SUV, a very capable Jeep off-roading white-space opportunity vehicle as well as a new mid-sized truck.” See for yourself in this video starting at the 90-minute mark. As for powertrains, Stellantis is developing three electric drive modules with a shared, scalable inverter, and other common components, as well as in-house software to control them. Those drive units will offer from 70 to 330 kW (94-402 horsepower). More specifically, one EDM will provide 70 kW, a second will provide 125-180 kW, while the most potent can produce 150-330 kW.