Lowered Floor Wheelchair Minivan Dodge Caravan Vmi Summit Ramp Conversion on 2040-cars

Auto blog

2020 Dodge Charger Hellcat Widebody, Scat Pack Widebody get grip, go faster

You all knew this was coming. Dodge basically showed it to the public a few months ago. But it's finally official, the 2020 Dodge Charger Hellcat Widebody and naturally aspirated Scat Pack Widebody are going into production. Like the Challenger Widebody, the Charger version is defined by its, well, wide body, which is now standard on all Hellcats and an option on Scat Packs. The fender flares add a total of 3.5 inches of width. Dodge also tweaked the front and rear bumpers and added wider side skirts to help the flares blend into the body. The Hellcat gets a unique rear spoiler, whereas the Scat Pack sticks with the same one its scrawnier twin uses. 2020 Dodge Charger Scat Pack Widebody View 20 Photos But the big advantage to this wide body is the fact Dodge can stick way more tire under the Charger. All Charger Widebody models get 11-inch-wide wheels with 305-mm tires at all four corners. Each version gets revised suspension, too. The Hellcat gets stiffer front springs, thicker front and rear anti-roll bars and retuned shocks. The Scat Pack gets a similar update, but without the thicker front anti-roll bars. Both cars also get six-piston front brake calipers from Brembo with two-piece rotors. All these handling upgrades mean the Charger is an even more impressive track machine. Dodge says the Hellcat now pulls 0.96g on a skid pad, and the Scat Pack Widebody does a little better at 0.98g. The Hellcat has also improved its lap time of Chrysler's 2.1-mile test course by 2.1 seconds, and the Scat Pack improved by 1.3 seconds. Both cars are also still fast in a straight line, with Dodge saying the Hellcat will hit 60 mph in 3.6 seconds on the way to a 10.96 quarter-mile time. Which, Dodge proclaims, makes it the world's most powerful and fastest mass-produced sedan. The Scat Pack Widebody will hit 60 in 4.3 seconds on the way to a 12.4-second quarter-mile.

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.

2020 Dodge Challenger 50th Anniversary Commemorative Edition puts on a Smoke Show

To celebrate the semicentennial of the Dodge Challenger this year, last November the muscle car brand announced a Challenger 50th Anniversary Edition. Available in seven of Dodge's high impact colors, Dodge said production would be limited to 1,960 cars, being 70 examples in each of the seven colors. Keeping the good thing going, the brand has just announced another 50th anniversary special, this one a Commemorative Edition with no cap on build numbers. The Commemorative Edition can be ordered on three 2020 Challenger trims, the R/T, R/T Scat Pack, and R/T Scat Pack Widebody, omitting the rear-wheel drive V6 GT model that can be configured as a 50th Anniversary Edition.    The Commemorative car is nearly identical to the Anniversary car. Outside, that means a Satin Black, hand-painted hood and black-wrapped roof and decklid, the Hellcat's air intake headlights, Satin Black fuel filler cap, Gold School-colored wheels, Gunmetal-colored brake calipers on trims that come with red Brembo brakes, and tons of badging all over from the illuminated "50" logos in the headlamps to the Satin Black Dodge logo in the taillamps. The interior gets sepia stitching on the heated and cooled performance seats, more sepia thread on for the Alcantara door bolsters, white gauges with yellow accents, berber floor mats, real carbon fiber trim pieces, and a bunch more badging. Paying homage to its elder, on startup a 1970 Challenger appears in the gauge cluster animation. Dodge says dealers will begin taking orders for the new celebrant this month, with deliveries to commence in the fall. The optional package adds $4,995 to the price of a 2020 Challenger R/T, $5,495 to the price of the R/T Scat Pack, and $5,495 to the cost of the R/T Scat Pack Widebody before the $6,000 cost of the widebody package itself. Whereas the 50th Anniversary car came in any of Dodge's eye-candy colors — F8 Green, Frostbite, Go Mango, Hellraisin, Sinamon Stick, TorRed, or the all-new Gold Rush — the Commemorative Edition is limited to the tamer end of the color palette, available in Granite, Indigo Blue, Octane Red, Pitch Black, Triple Nickel, White Knuckle, and the new Smoke Show hue. That latter color replaces Destroyer Gray, and can be ordered on the Charger as well. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.